20 ft Timberline Wave Top Monitor Display Kit – Straight Sides – Package

This package includes:

• (2) 10′ Modular display frames w/ (2) center graphic panels & (3) monitor/joiner graphic panels
• (2) Fabric end panels
• (2) Wave top canopies
• (2) Acrylic reception desks
• (2) Metal fusion printed headers
• (6) Acrylic shelves
• (2) Molded plastic wheeled cases. Interior dimensions: 26″ and 24″(inset) w x 45.5″h x9.375″d
• (4) LED lights
• (2) 40″ Wave tube counters
• (2) Vesa compatible large monitor mounts-supports up to a 50″ LCD screen. Not to exceed 50lbs.
• (1) Set of instructions

Product Information

Getting the 20ft Timberline Wave Top Monitor Display Straight Sides Package Show-Ready

Setup is straightforward enough that a two-person crew handles it comfortably within a standard install window. Here is a realistic walk-through from cart to open show floor.

1. Inventory the cases. Lay out all frame extrusions, connectors, graphic panels, and the monitor mount hardware. Cross-check against the packing list before you begin — catching a missing part at the hotel beats discovering it on the show floor.
2. Build the frame. Snap the Timberline extrusions together at the floor, working left to right across the 20′ span. The wave top section goes up last; the curved profile locks into the vertical uprights at the designated connection points without tools.
3. Attach the graphic panels. Fabric graphics slide onto the frame channels under light tension. Start at one end and work across so wrinkles do not accumulate. The straight side panels align flush with the outer uprights for a finished edge on both sides.
4. Mount the monitor hardware. Attach the monitor bracket to the designated frame position — typically center or slightly off-center depending on your layout — and secure your screen using the bracket’s adjustable arm. Run cables through the channel routing before tightening.
5. Final dress and power. Straighten any minor graphic tension, plug in the monitor, and do a quick sightline check from 10′ and 20′ out to confirm the display reads the way you intended.

Structure, Print, and Finish Details Worth Examining Up Close

The straight-side configuration on this kit is not simply a default — it is a deliberate choice that creates a consistent rectangular silhouette that pairs well with counters, pedestals, or hanging literature at booth perimeter. If you want more visual drama at the side edges, the tapered-side variants in the 20ft Timberline modular lineup are worth reviewing, but the straight-side geometry is the right call for exhibitors who want predictable, booth-fill-to-booth-fill alignment in island or inline arrangements.

Frame extrusions are anodized aluminum, which keeps the assembled weight manageable while delivering the rigidity needed for a 20′ span. Graphic panels are dye-sublimated fabric — colors are reproduced at high resolution with no banding or dot gain artifacts common to older inkjet formats. The fabric surface is wrinkle-resistant under normal handling, and panels can be spot-cleaned between shows without affecting print fidelity.

The wave top profile is not purely decorative. Its height adds roughly 12″ to 18″ of effective visual real estate above a conventional rectangular backwall, which matters in convention halls where sight lines are compressed by adjacent booths. The curve also softens the upper silhouette against a hard ceiling grid, giving the display a finished, architectural quality that resonates across a range of industries.

For exhibitors earlier in the planning process, the modular trade show booth design guide covers graphic file requirements, fabric substrate choices, and what to ask a printer before you place your first order — worth a read if this is your first large-format fabric display.

Pairing This Kit Within the Broader Timberline System

The 20ft timberline wave top monitor display straight sides package is engineered to operate as a standalone configuration, but it also fits naturally into a multi-booth exhibit program. The Timberline trade show display range is built on a shared extrusion system, which means frame components can be redistributed across configurations between shows rather than retired when a footprint changes.

If your program includes regional events where a smaller footprint is more appropriate, the 10ft timberline modular configurations use the same core hardware and graphic attachment system — your crew learns the build process once and applies it across both sizes. Conversely, if a flagship show calls for a larger presence, the 30ft timberline booth extends the same wave top language across a wider span with added structural sections.

For exhibitors planning a multi-show season with this kit, a custom 20ft timberline display allows you to swap in fresh graphics between events without replacing the frame — a practical way to manage costs across a full calendar year.

The 20ft timberline exhibit is also compatible with optional counters, literature holders, and lighting accessories sold separately through Showfire Displays, so the kit can grow incrementally rather than requiring a full replacement when your booth program evolves.

Ready to Configure and Order

The 20ft timberline wave top monitor display straight sides package is available for order now through Showfire Displays. Contact the team to confirm graphic file specs, request a custom proof, or ask about lead times for your next show date — and get your configuration locked in before your deadline arrives.