20 ft Timberline Wave Top Monitor Display Kit – Straight Sides – Closet Storage Right

This package includes:

• (2) 10′ Modular display frames w/ (2) center graphic panels & (3) monitor/joiner graphic panels
• (2) Fabric end panels
• (2) Wave top canopies
• (2) Acrylic reception desks
• (2) Metal fusion printed headers
• (6) Acrylic shelves
• (2) Molded plastic wheeled cases. Interior dimensions: 26″ and 24″(inset) w x 45.5″h x9.375″d
• (4) LED lights
• (2) 40″ Wave tube counters
• (2) Vesa compatible large monitor mounts-supports up to a 50″ LCD screen. Not to exceed 50lbs.
• (1) Set of instructions

Product Information

From Unboxing to Show-Ready: Setup in Five Steps

One of the strongest arguments for this configuration is how straightforward the build process is. The sequence below reflects a typical show-morning deployment.

1. Open the shipping cases and inventory the components. The frame tubes, fabric panels, closet hardware, and monitor arm each pack into labeled sections. A quick count against the included packing list confirms nothing is missing before you start.
2. Assemble the aluminum frame. The Timberline frame uses a push-button connector system — tubes click into place without tools. Start at the base, work upward through the straight side columns, and finish with the wave-profile header bar.
3. Stretch the fabric graphics over the frame. Dye-sublimated pillowcase-style graphics zip or clip around each panel section. The fabric holds taut automatically once attached, giving you a wrinkle-free graphic surface across the full 20-foot width.
4. Install the closet enclosure on the right side. The right-side storage unit attaches to the existing frame nodes — no additional hardware drilling. The closet door locks with the included key, securing valuables through the entire show day.
5. Mount the monitor arm and connect your screen. The arm brackets onto dedicated frame points and adjusts for height and tilt. Route your HDMI and power cables through the integrated cable channels so the finished look stays clean from the front.

Your display is show-ready. Total setup time for a practiced two-person team typically runs 45 to 60 minutes.

Graphic Quality and Structural Finish Details

Up close, this kit holds up to the scrutiny that happens when a prospect walks directly to your booth. The fabric panels are produced via high-resolution dye-sublimation printing, a process that bonds pigment directly into the polyester fiber rather than sitting on the surface. That means colors stay vivid under harsh expo-hall lighting without fading or cracking over repeated wash cycles — critical for a display that ships in and out of cases dozens of times a year.

The wave top silhouette adds a deliberate shape break above the straight panel field. Unlike a flat header, the curved profile creates a sense of depth at a distance and gives the display a finished, architectural look that flat-top inline booths rarely achieve. The straight side columns anchor the composition cleanly, and the right-side closet panel integrates flush with the overall structure so it reads as part of the design rather than an afterthought addition.

The aluminum extrusion has a matte silver anodized finish that stays presentable even after years of show use. Frame joints maintain a firm connection across the full assembly, so the structure does not flex or wobble when someone leans on a counter or brushes past a column.

Pairing This Configuration With the Broader Timberline Range

This configuration sits within the full 20ft Timberline modular display family, which includes alternative header styles and storage configurations to match different program needs. If your show schedule includes smaller satellite events where a 20-foot inline is too large, the 10ft timberline booth uses the same frame system and compatible graphics workflow, so your brand identity translates consistently across booth sizes without reprinting everything from scratch.

At the opposite end of the range, the 30ft timberline modular is worth reviewing if your anchor show allocates a larger inline or peninsula space. The full Timberline trade show display line is designed so components share structural logic across sizes, making cross-configuration upgrades simpler than starting over with a completely different system.

For teams still early in the exhibit selection process, the modular trade show display guide on Showfire’s site walks through the key decisions — footprint sizing, graphic update cycles, storage requirements, and total cost of ownership — with enough detail to validate whether a modular system like this one fits your program before you commit.

Configure Your 20ft Timberline Wave Top Monitor Display Straight Sides With Closet Storage Right

This kit is ready to customize with your brand graphics, monitor specifications, and any accessory additions your program requires. The custom 20ft timberline display option lets you upload artwork directly and proof graphics before production, so what you see in the preview is what arrives at your dock.

The 20ft timberline wave top monitor display straight sides with closet storage right is stocked and available now through the 20ft timberline exhibit product pages. Contact Showfire Displays to confirm lead time, request a quote, or ask about graphic design services. Your next show has a deadline — get your configuration locked in today.