20 ft Timberline Wave Top Monitor Display Kit – Straight Sides – Package – Slat Walls

This package includes:

• (2) Modular display frames with dye-sublimation graphics
• (1) Joiner panel
• (2) Wave Top canopies
• (2) Acrylic reception desks
• (6) Acrylic shelves
• (4) LED lights
• (2) Metal fusion printed headers
• (3) Molded plastic wheeled cases (Inside dimensions: Interior 26 and 24 x 45.5 x9.375)
• (2) 40″ Wave tube counters
• (4) Slat walls to display product
• (1) Vesa compatible large monitor mount-supports up to a 50″ LCD screen. Not to exceed 50lbs.
• (1) Set of instructions

Product Information

What the Straight-Sides Wave Top Structure Actually Gives You

The structural foundation of this kit is a modular extrusion frame engineered for repeated setup and breakdown cycles. Straight side panels run the full height of the booth from floor to the wave top peak, creating clean vertical canvas for large-format graphic panels that print to vibrant, edge-to-edge color. The wave top itself is not decorative trim — it is a load-bearing canopy element that integrates directly into the frame, so there are no awkward clip-on additions that loosen over time.

The slat wall panels built into the side sections are made from the same durable composite material common in high-traffic retail environments. Standard slat wall accessories — hooks, shelves, brochure holders, gridded bins — fit directly without adapters, which means you can reconfigure your merchandising layout between shows without buying new hardware. This is the feature that separates this configuration from a standard graphic-only inline: the display earns its square footage by functioning simultaneously as a brand wall and a sales floor.

The monitor mount at center accepts flat-panel screens up to standard large-format sizes, and the mount position is reinforced within the frame so the display does not flex or lean under the weight of a monitor. Cable management channels run through the frame interior, keeping cords out of sight and off the floor. For a complete picture of how this kit compares to the other configurations in the lineup, the 20ft Timberline modular display hub page lists every available package side by side.

A Typical Show-Day Walk-Through

Picture a regional medical devices trade show — a crowded hall of 10ft inline booths stretching across a convention center floor. Your team rolls in two transport cases the evening before, pops the extrusion channels into place, slides the graphic panels into their tracks, and locks the wave top section onto the uprights. The monitor is mounted and connected before the hall lights come on for the morning session.

By the time attendees walk the floor, the 20ft timberline wave top monitor display straight sides package with slat walls is running a product demo loop on the center screen while three slat wall bays on each side display physical samples on adjustable hooks. A distributor walks up, scans a QR card hanging from a slat wall peg, and your rep closes a conversation that started because the display had something tangible to show — not just a graphic to look at.

That scenario is repeatable. At teardown, the panels come apart in the reverse order they went up, the cases close cleanly, and the whole system ships to the next venue without damage. A custom 20ft timberline display at this scale is a long-term asset, not a one-event expense.

Practical Buyer Questions

How does this configuration compare to one with closet storage instead of slat walls?

Closet storage configurations use the side panel space for locking enclosed cabinets — useful for locking up valuables or storing supplies during the show. Slat wall configurations sacrifice that enclosed storage in exchange for open merchandising surface. If your primary need is product display or literature distribution, the slat wall layout wins. If you need secure on-site storage, a storage-configured kit from the 20ft timberline booth range is the better match.

Can the graphics be updated between shows without replacing the frame?

Yes. Graphic panels are separate from the structural extrusion frame. You can order replacement panels for a new campaign, a seasonal refresh, or a rebranding without purchasing a new kit. This is one of the core advantages of the Timberline modular display system — the hardware investment is made once, and the graphics evolve with your brand.

Is this kit the right size, or should I consider scaling up or down?

The 20ft inline is the most common choice for brands that exhibit more than four times per year and need a display that carries serious visual weight without the logistics complexity of a larger island. If your allocated space is 10ft, the 10ft timberline exhibit covers that footprint with the same structural quality. If your program runs in a 30ft space or you want a large island presence, the 30ft timberline display scales the system up accordingly. For a broader framework on matching display size to show goals, the modular trade show display guide covers the decision in practical detail.

Ready to Put the 20ft Timberline Wave Top Monitor Display Straight Sides Package With Slat Walls to Work

If your exhibit program demands a 20ft modular display that functions as a brand wall, a product demo screen, and a merchandising station at the same time, this configuration delivers all three without compromise. The 20ft timberline wave top monitor display straight sides package with slat walls ships ready to configure, builds tool-free on show day, and is backed by the full Showfire Displays support team from quote through delivery. Contact Showfire Displays today to confirm your graphic specs, request a custom quote, and lock in your production timeline before your next show date.