30 ft Timberline Wave Top Monitor Display Kit – Tapered Sides – Package

This package includes:

• (3) Modular display frames with dye-sublimation graphics
• (2) Joiner panels
• (2) Fabric end panels
• (3) Large center panels
• (3) Wave Top canopies
• (6) LED lights
• (3) Acrylic reception desks
• (3) Molded plastic wheeled cases (Inside dimensions: Interior 26 and 24 x 45.5 x9.375)
• (9) Acrylic shelves
• (3) Metal fusion printed headers
• (3) Wave tube counters with dye-sublimation graphics
• (2) Vesa compatible large monitor mounts-supports up to a 50″ LCD screen . Not to exceed 50lbs.
• (1) Set of instructions

Product Information

From Unboxing to On-Floor in a Predictable Number of Steps

One of the practical advantages of the 30ft timberline wave top monitor display tapered sides package is how methodically it goes together. Here is what that process looks like from the moment cases arrive at your booth space:

1. Open and inventory. Cases are organized by component type, so hardware, fabric graphics, and monitor-mount hardware are separated from the start. Run a quick count against the packing list before you begin.
2. Build the frame sections. The modular extrusion system clicks and locks in sequence. Work from the center outward, securing each column before moving to the next bay.
3. Install the tapered side panel frames. These angled uprights are pre-labeled and connect to the main frame at fixed attachment points — no guesswork about angle or orientation.
4. Slip on the fabric graphics. Pillow-case style tension fabric slides over each frame section and zips or pops into place. Graphics are pre-fitted to their specific panels, so alignment is built in.
5. Mount the monitors. The integrated monitor arms are part of the frame rather than a surface-mounted accessory. Secure your screens, route cables through the internal management channels, and connect.
6. Final dress and test. Step back, check tension uniformity across all fabric panels, confirm monitors are displaying, and you are ready for floor traffic.

Total setup time for a practiced two-person crew typically runs well under two hours for the full 30-foot span.

Structural and Print Details Worth a Close Look

The Wave Profile at Large Scale

At 30 feet, the wave-top silhouette covers enough horizontal distance that its rhythm becomes visible from the main aisle at a significant distance — drawing attendees toward your space before they consciously decide to approach. The curve is not decorative trim; it is the top edge of the primary graphic panel, meaning the highest point of your branding contour is shaped rather than flat. That detail separates this 30ft timberline exhibit from generic rectangular inline builds.

Tapered Side Panels

The inward-tapered sides narrow the visual footprint at the perimeter, which channels sight lines toward the center monitors and graphic zones. For exhibitors running product demos or looping brand video, that natural funneling effect is a genuine layout advantage. The taper also keeps the overall profile from feeling like a wall — it reads as an environment attendees can step into rather than a barrier they walk past.

Fabric Graphics and Print Specs

Graphics are produced via dye-sublimation on stretch polyester that resists wrinkles during transit and recovers quickly on the frame. The fabric panels are interchangeable, so updating graphics between shows means ordering new fabric — not new hardware. Color accuracy is high across the full graphic area, including edge-to-edge printing on the wave-top and tapered-side panels. For file submission specs and turnaround estimates, the modular trade show display guide covers print-ready requirements in detail and is worth reviewing before you build your design files.

Scaling This Kit Up, Down, or Sideways in Your Exhibit Program

The Timberline trade show display system is designed so that components share a common frame language across sizes, which matters when you are managing inventory across multiple shows or booth footprints. If a secondary event calls for a smaller footprint, the 20ft timberline modular configuration covers the mid-range with the same wave-top and monitor-mount options. For regional shows, tabletop events, or situations where your program needs a compact but brand-consistent presence, the 10ft timberline exhibit pulls from the same design vocabulary without requiring a separate hardware ecosystem.

This cross-size compatibility means your 30ft timberline wave top monitor display tapered sides package is not an isolated purchase — it anchors a scalable system. The custom 30ft timberline display page covers additional configuration options, including storage add-ons, different side panel profiles, and alternative header shapes, so you can build out the package that matches your actual floor plan and show schedule.

For exhibitors evaluating the broader category before committing to a specific configuration, the modular display buying guide compares modular systems against custom builds and helps clarify which structural features matter most at different price points and show frequencies. It is a practical reference if this is your first 30ft modular display purchase or if you are transitioning from a custom build.

Configure This Package and Reserve Your Spot on the Schedule

The 30ft timberline wave top monitor display tapered sides package is a production item, and graphic turnaround is the longest lead-time variable in your timeline. Configure your frame options, submit print-ready files early, and confirm monitor sizing before your first order is placed. If you have questions about component compatibility, graphic templates, or shipping logistics, the Showfire Displays team is available to walk through the details. Configure your kit now and get your timeline locked in before your next show date.