30 ft Timberline Wave Top Display Kit – Tapered Sides

This package includes:

• (3) Modular display frames
• (3) Metal fusion printed headers
• (2) Straight end panels
• (2) Joiner panels
• (3) Large center panels
• (3) Wave Top canopies
• (6) LED lights
• (3) Acrylic reception desks
• (3) Molded Plastic wheeled cases (Inside Dimensions: Interior 26 and 24 x 45.5 x9.375)
• (9) Acrylic shelves
• (2) Vesa compatible large monitor mount-supports up to a 50″ LCD screen.Not to exceed 50lbs.
• (1) Set of instructions

Product Information

Who This Kit Is Built For

This configuration makes the most sense for three distinct buyer situations.

First, it suits brands that hold a consistent 30-foot inline space across multiple shows each year and need a display system that looks polished at show after show without requiring a full rebuild. The tapered side geometry gives the footprint a finished, architectural quality that holds up whether you are at a regional industry event or a major national convention.

Second, it fits marketing teams that want a custom 30ft timberline display they can actually own and manage in-house, without depending on an exhibit house for every minor update. Because graphics are fabric-based and the frame is reusable, your team can order replacement panels when messaging changes and install them without specialized tools or outside labor.

Third, this kit works well for exhibitors who are scaling up from a smaller footprint. If you have been running a 20ft timberline modular setup and are moving into larger booth spaces, the 30-foot wave top tapered configuration provides a logical step up in scale and visual weight while staying within the same modular system your team already knows.

What the 30ft Timberline Wave Top Display Tapered Sides Includes

The kit is structured around a core set of components that work together from the first setup:

• Wave top canopy with tension fabric graphic — the curved header panel spans the full width and holds printed fabric under continuous tension, keeping the image sharp under booth lighting
• Tapered side panels — angled end frames with full-bleed fabric graphics that define the booth’s left and right boundaries while adding dimensional depth to the overall silhouette
• Timberline aluminum extrusion frame — lightweight, tool-free extrusion system that locks into place with internal connectors and disassembles in the reverse order without extra hardware
• Fabric dye-sublimation graphics — all panels print via dye-sublimation for accurate color reproduction, high washability, and resistance to the creasing that plagues cheaper banner-based graphics
• Travel cases — the frame and fabric components pack into included cases sized for standard freight, reducing the risk of damage in transit and keeping components organized between shows

Setup, Longevity, and On-the-Road Practicality

Getting the 30ft timberline wave top display tapered sides on the floor follows a predictable sequence. The aluminum extrusion sections connect in a logical order — base uprights first, then the horizontal runs, then the curved wave top header — so a two-person crew can work through the assembly without referencing the manual after the first couple of deployments. Fabric panels slip over the frame sections and zip or clip into place, with the tension system doing the work of smoothing out any installation wrinkles.

For long-term care, the fabric graphics are machine washable in cold water, which matters more than it sounds when a display travels to a dozen events per year. Keep the aluminum extrusion sections stored in their designated case slots to avoid surface scratching that can make sections harder to join over time. Inspect connector points after every show and replace any worn locking pins before the next deployment — this is the single maintenance step most exhibitors skip and the one most likely to cause a slow assembly day.

Because the Timberline system is modular by design, individual panels can be retired and replaced without purchasing a new frame. If you want to compare the full range of configurations available at this footprint, the 30ft timberline exhibit hub page lays out every option alongside this one.

Placing This Kit in a Larger Exhibit Program

A 30ft inline is often the anchor display in a multi-show exhibit program, and the Timberline system is built with that role in mind. The same aluminum extrusion hardware that makes up this kit is compatible with other configurations across the Timberline modular display line, so components can be shared across differently sized setups rather than siloed by configuration.

If your program also includes smaller shows where a 30-foot footprint is impractical, a 10ft timberline booth offers the same frame system and dye-sub fabric graphics at a size that fits standard 10-foot inline spaces — making it easier to maintain visual brand consistency across events of different scales. Buyers who want a broader framework for thinking through display size, configuration trade-offs, and total cost of ownership will find the modular trade show display guide a useful reference before finalizing this purchase.

For exhibitors considering 30ft timberline with storage as part of the configuration, Showfire offers accessory options that integrate directly with the base structure — ask about counter and storage configurations when you reach out.

Ready to Configure Your Kit

The 30ft timberline wave top display tapered sides is available to configure with your custom graphics and accessory selections now. Contact the Showfire team to discuss production timelines, graphic file requirements, and shipping options — or start your order directly on the product page.