10 ft Timberline Wave Top Monitor Display Kit – Tapered Sides

This package includes:

• (1) Modular display frame
• (1) Metal fusion header
• (2) Center fabric panels
• (2) Side fabric panels
• (1) Wave canopy
• (3) Acrylic shelves
• (1) Acrylic reception desk
• (2) LED lights
• (1) Molded plastic wheeled case. Interior dimensions: 26″ and 24″(inset)w x 45.5″h x9.375″d
• (1) Vesa compatible large monitor mount-supports up to a 50″ LCD screen.Not to exceed 50lbs.
• (1) Set of instructions

Product Information

Setup From Carry Case to Finished Booth

Getting this display into place does not require tools or an installation crew. Here is how a typical setup unfolds:

1. Open the carry case and inventory the components. The frame tubes, connectors, monitor bracket, storage shelf, and pillowcase graphic sets are all nested together. Lay them out on the floor before you begin so nothing gets assembled out of sequence.
2. Build the frame from the ground up. Timberline frames use a straightforward push-button locking system. Assemble the base columns first, then extend upward through the wave top arch. The tapered side sections lock in at a fixed angle — you will feel and hear the connectors seat positively.
3. Slide the pillowcase fabric over the frame. Each fabric panel is sewn to follow the exact profile of its section, so there is no guesswork about orientation. Zip or clip the panels closed at the base and any seam points specified in the included instructions.
4. Mount the monitor bracket and route cables. The central monitor mount attaches to a dedicated cross-bar in the frame. Most standard flat-panel displays in the 32″ to 55″ range fit the integrated VESA-compatible bracket. Cable management channels run along the interior uprights, keeping cords hidden from visitor view.
5. Install the storage shelf and dress the interior. The rear storage compartment sits behind the backwall panel. Place literature, personal belongings, or show supplies inside before the show opens and access them discreetly throughout the day.
6. Step back and verify alignment. The wave crest and tapered sides should form a clean, continuous silhouette. Minor fabric tension adjustments — a small tug at a seam or base corner — take care of any residual looseness before the floor opens.

Total setup time for a two-person team typically runs 30 to 45 minutes on the first outing and drops to under 20 minutes with practice.

Graphic Quality and Frame Details Worth Examining Up Close

Visitors who walk up to this display are going to notice things that do not show from across the aisle. The fabric panels are produced with dye-sublimation printing, a process that bonds color into the fiber rather than sitting on top of it, so the result resists fading under venue lighting and does not crack or peel with repeated installation cycles. Full bleed printing extends to the edges of every panel, meaning the wave header and tapered side sections carry continuous imagery rather than bordered boxes.

The aluminum frame has a matte silver finish that does not compete visually with the printed graphics. Connector hardware is recessed or covered by the fabric, so the finished display has no visible metal protrusions or exposed joints. The wave profile is formed by rigid curved tubes rather than flexible bends, which means it holds its shape through the full day without sagging or shifting. If your brand guidelines call for a specific Pantone or CMYK match, the dye-sublimation process can reproduce it accurately — supply a color-calibrated print-ready file and the output will be consistent across every panel.

Replacement graphics ordered for a future show use the same pillowcase format, so the frame never needs to be modified. That makes the 10ft timberline wave top monitor display tapered sides a genuinely reusable platform across multiple events and campaigns, not a single-use purchase.

Placing This Kit Alongside Other Timberline Configurations

The Timberline modular display line is built around a shared frame system, which means components and carry cases are designed to complement each other across sizes. If your program grows beyond a 10ft inline footprint, the 20ft Timberline display uses the same fabric and frame logic and can be staffed by the same crew with minimal retraining. For brands that anchor a major annual show and need a commanding island-style presence, the 30ft timberline exhibit extends the system further while preserving all the graphic replacement and storage advantages.

Within the 10ft footprint itself, this kit is one of the most capable configurations because it addresses three separate exhibitor needs — live content delivery via the monitor, brand storytelling through the custom timberline display graphics, and practical on-floor storage — without requiring a separate AV cart or separate literature stand. Buyers who are still deciding between configurations at this size will find the modular trade show display guide a useful reference for weighing footprint, feature set, and budget against each other before committing.

The 10ft timberline wave top monitor display tapered sides is also a strong candidate for 10ft timberline with storage use cases where venue regulations limit the amount of ancillary furniture allowed in an inline booth space.

Configure Yours and Ship It to Your Next Show

This kit is available with fully custom dye-sublimation graphics, and orders can be configured directly through the 10ft timberline modular display category page, where you will also find alternative configurations at this footprint. The timberline wave display format ships in a compact carry case sized for standard cargo transport. Upload your artwork, confirm your monitor size, and the team at Showfire Displays will handle the rest.

Ready to lock in your next exhibit? Configure the 10ft timberline wave top monitor display tapered sides today and get a display that works as hard as your team does on the show floor.