10 ft Timberline Wave Top Monitor Display Kit – Tapered Sides – Package 2

This package includes:

• (1) 10′ x10′ Timberline Monitor Display frame
• (2) Center fabric graphics
• (2) Fabric graphics
• (1) Metal fusion printed header
• (3) Acrylic shelves
• (1) Literature station with case
• (1) Acrylic reception desk
• (1) 40″ Counter with custom graphics
• (1) Vesa compatible large monitor mount-supports up to a 50″ LCD screen.Not to exceed 50lbs.
• (2) LED lights
• (1) Molded plastic wheeled case. Interior dimensions: 26″ and 24″(inset)w x 45.5″h x9.375″d

Product Information

What the 10ft Timberline Wave Top Monitor Display Tapered Sides Package 2 Includes

The frame system at the heart of this configuration is the Timberline aluminum extrusion, a lightweight but rigid structure that snaps together in minutes. Tapered side columns narrow from the base to the top, which accentuates the wave silhouette and gives the overall display a sculpted, architectural quality rather than the boxy look common to rectangular frames. The monitor mount is built into the upper center of the frame, engineered to support flat-panel screens up to a specified size range and angled for optimal viewing across a standard 10′ booth corridor. Because the mount is integrated rather than clamped on as an afterthought, cable routing is clean and the display reads as a single cohesive unit from the front.

Fabric graphics wrap the frame in dye-sublimated polyester that holds color accurately over repeated washings and years of show use. The wave-top graphic is cut and hemmed to follow the frame’s curved header precisely, so there are no awkward folds or gaps at the top edge. Storage is handled by built-in shelving or a back-compartment enclosure — depending on your final configuration choice — that keeps the floor plan tidy without requiring a separate counter or table. The complete kit packs down into cases sized to roll through standard trade show drayage without triggering oversized freight charges.

As part of the broader 10ft Timberline modular display family, this package is designed to be compatible with other Timberline accessories and add-ons, so your investment today is not a dead end if your exhibit strategy grows.

A Walk-Through: How This Display Performs at a Regional Medical Device Show

Picture a 10′ inline booth at a mid-size healthcare conference. The exhibitor sells diagnostic software and needs visitors to watch a 90-second product demo without stopping to read brochures. They set up the 10ft timberline wave top monitor display tapered sides package 2 the morning of the show: frame sections connect in sequence, the fabric graphic slides over the frame and zippers at the base, and the monitor drops onto the integrated mount with no additional hardware. Total setup time runs under 45 minutes for a two-person team.

Once the monitor is on and the demo loop is running, the wave-top frame naturally directs aisle traffic inward — curious visitors walk toward the screen rather than past it. The tapered sides create a subtle sense of enclosure that makes one-on-one conversations feel less exposed than in a wide-open booth. Literature and a spare laptop stay in the rear storage compartment, off the floor and out of sight. At close of show, the display breaks back down into its cases in under 30 minutes and rolls to the loading dock as standard freight. The entire cycle — setup, full day of show, teardown — runs on a two-person crew with no hired labor.

Buyer Questions Answered

Does the tapered side design limit how I can position this display in my booth space?

Not in most standard 10′ inline configurations. The taper is a visual design element built into the side columns; the footprint stays within a conventional 10′ width. You will want to confirm your venue’s height allowance against the wave-top peak measurement, but the base dimensions are consistent with standard inline regulations.

Can I reorder graphics without replacing the entire frame?

Yes. Because this is a Timberline trade show display built on a modular platform, graphics are separate from the structural components. When your artwork needs refreshing or you are exhibiting under a different product line, you order new fabric panels and re-use the same frame and hardware. For a deeper look at how modular systems handle multi-year graphic strategies, the modular display buying guide covers the comparison in detail.

What if I need a larger footprint down the road?

The Timberline line scales up. If your event program grows to a 20′ space, the 20ft Timberline modular display uses the same frame system and accessories, which means your team already knows the setup process. For island or peninsula shows requiring even more presence, the 30ft timberline exhibit handles that footprint without switching platforms entirely.

Configure Your Display and Place Your Order

The 10ft timberline wave top monitor display tapered sides package 2 is a strong, practical choice for any exhibitor who needs a monitor-integrated backwall with real storage, a distinctive profile, and the freedom to refresh graphics between shows. As a custom timberline display, every unit ships with your artwork already printed and ready to install — no on-site printing, no last-minute vendor scrambles. Upload your files, confirm your monitor size, and let the Showfire Displays team handle the rest. Contact us today to get a quote and lock in your production slot before your next event date.