Ez Mod Modular Kit – EZ Tube(R) Connect 10 ft. Kit B (Singled-Sided) (3

Graphic Packages Include:

• (2) Top cross bar – 3ft. slope
• (2) Bottom cross bar – 3ft.
• (1) Top cross bar – 4ft. round
• (1) Bottom cross bar – 4ft
• (4) 3-section 64″ pole
• (6) Bottom cross bar L shape connector
• (2) Single foot – 34mm
• (2) Double Foot – 34mm
• (4) Connecting clip
• (1) Medium Hard Case
• (2) Soft Bag – 3ft.
• (1) Soft bag – 4ft.
• (4) Connecting Clip
• (3) Double-Sided / Single-Sided Graphics

Features:

• Material: Stretch Fabric
• Display Size: 120″W x 90″H x 18.75″D
• Shipping Dimensions: 26″W x 17″H x 40″D
• Shipping Weight: 62 lbs (frames and graphics)

What This ez mod modular Kit Includes

The Kit B configuration is built around a specific three-panel geometry — a 3 ft. wing, a 4 ft. center, and a 3 ft. wing — that creates a subtle depth without consuming extra floor space. That layout is intentional: the slight angle variation lets brands display a single large continuous graphic or break the surface into distinct visual zones depending on the artwork layout.

The key components bundled in this kit:

• Aluminum EZ Tube(R) Connect frame (3′ x 4′ x 3′ configuration)
• Single-sided SEG fabric graphic panel — custom printed to your supplied artwork
• Silicone edge bead sewn directly into the graphic for a seamless channel-lock fit
• Padded carry bag for frame transport and storage
• All connector hardware and end caps included

Note: This listing covers the single-sided version. A double-sided option is available separately if you need messaging on both faces.

How the Frame and Graphic System Work Together

The EZ Tube(R) Connect frame uses a snap-button tube-and-connector architecture — no wrenches, no loose screws, no missing parts. Each aluminum tube clicks into its connector at a fixed angle, and the geometry self-aligns as you build. Once the frame is up, the SEG fabric graphic slides into the perimeter channel from any corner and zips around with light finger pressure until it’s seated and taut.

The resulting surface is smooth, backlit-ready (with an optional LED lighting accessory), and far cleaner than pop-up or banner-stand setups in the same footprint. If you’ve been browsing a modular pop up display and found it lacks the polish your brand needs, the SEG fabric approach here is a direct upgrade in visual quality at a comparable price point.

The single-sided format means all print energy faces your aisle — no wasted graphic real estate on a back wall that nobody sees.

Ideal Use Cases for This Configuration

The 3′ x 4′ x 3′ footprint hits a useful middle range: larger than a single banner stand, smaller than a full 10 x 10 wall, and more architecturally interesting than a flat display. That makes it a natural fit for several booth scenarios.

Inline 10 x 10 anchor: Position Kit B at the rear wall with a table and product samples in front. The angled wings create a slight enclosure effect that draws attendees in rather than letting them walk past.

Paired or extended builds: Because this is part of the broader ez mod modular kit ecosystem, it can be placed alongside compatible EZ Connect frames — counters, towers, or additional wall sections — to build out a larger exhibit footprint without buying an entirely new display system.

Corporate events and lobby installs: The tool-free setup and carry bag make this viable outside the trade show floor. Product launches, job fairs, and semi-permanent lobby installs all benefit from a display that goes up in minutes and packs flat for storage.

Retail and experiential: Brands running in-store activations or branded pop-up experiences find the single-sided format ideal for positioning against a wall or at the end of an aisle.

If you’re still comparing formats and haven’t settled on a direction, the modular trade show displays guide on this site walks through the full category — geometry types, hardware options, and what to prioritize at different budget levels.

Graphic Specifications and Ordering

The custom-printed SEG fabric graphic is produced on a stretch polyester fabric that holds color vibrantly under both ambient and direct lighting. Artwork should be submitted as a high-resolution vector or raster file (300 dpi at final size) with bleed as specified in the template provided at checkout.

Standard production turnaround is 5 to 7 business days after artwork approval, with rush options available. If you need a modular display frame only — without a graphic — that option is available by contacting the Showfire Displays team directly, which is useful for exhibitors who already have a compatible SEG panel from a prior build.

For exhibitors who want to build confidence in the broader category before committing to a specific kit, the trade show displays buyer guide is a helpful resource covering budgeting, graphic production, and exhibit strategy from the ground up.

Order Your EZ Tube(R) Connect 10 ft. Kit B

This is a strong starting point for any exhibitor who wants a professional, custom ez connect modular display without the cost and complexity of a large exhibit build. The combination of tool-free setup, SEG fabric graphics, and a reconfigurable frame makes it practical for frequent travelers and first-time exhibitors alike.

To buy ez connect modular hardware and graphics together in a single order, browse the full EZ Connect line on Showfire Displays — or configure this Kit B directly on the product page and upload your artwork to get started. Questions about sizing, graphic templates, or compatible accessories? Contact the team for a quick response and same-day quote.