EZ Tube Connect 10 ft. Kit B (3 x 4 x 3 ft) – Double-Sided

Name: EZ Tube Connect 10 ft. Kit B (3 x 4 x 3 ft) - Double-Sided
Brand: EZ Tube Connect Kit - EZ Mod Modular Display Systems
SKU: WSEZCNCT-10KIT-B-3X4X3G2
Availability: InStock

$1,048.00

Production Time: 2 Business Days After Proof Approval

The ez tube connect 10ft kit b double sided is a purpose-built exhibit for brands that need full-coverage visibility on a 10-foot footprint without sacrificing portability or setup speed. Unlike single-sided configurations, this kit wraps your message around both faces of the display, so you capture attention from two directions simultaneously — a genuine advantage in busy aisles where booth traffic flows both ways. The asymmetric 3 x 4 x 3 ft panel layout creates a stepped profile that adds visual depth, giving your space a considered, architectural feel rather than a flat wall of fabric. Every component — aluminum tube frame sections, connectors, and printed fabric graphic panels — ships together as a matched system, so there is no hunting for compatible hardware after the fact. Custom dye-sublimation printing is standard, meaning your artwork arrives with sharp color and clean edges, not the washed-out tones you get from lower-resolution processes. The whole kit packs down into a carry bag compact enough to check as luggage or slide into a cargo van alongside other display equipment. If you are building or refreshing a booth program, this is a display that earns its floor space event after event.

SKU: WSEZCNCT-10KIT-B-3X4X3G2 Category: EZ Tube Connect Kit - EZ Mod Modular Display Systems

Graphic Packages Include:

(2) Top cross bar – 3ft. slope
(2) Bottom cross bar – 3ft.
(1) Top cross bar – 4ft. round
(1) Bottom cross bar – 4ft
(4) 3-section 64″ pole
(6) Bottom cross bar L shape connector
(2) Single foot – 34mm
(2) Double Foot – 34mm
(4) Connecting clip
(1) Medium Hard Case
(2) Soft Bag – 3ft.
(1) Soft bag – 4ft.
(4) Connecting Clip
(3) Double-Sided / Single-Sided Graphics

Features:

Material: Stretch Fabric
Display Size: 120″W x 90″H x 18.75″D
Shipping Dimensions: 26″W x 17″H x 16″D
Shipping Weight: 62 lbs (frames and graphics)

A 3 x 4 x 3 Configuration That Works Harder Than a Straight Wall

The stepped 3 x 4 x 3 ft panel arrangement is the structural idea that sets this kit apart from a basic linear backdrop. The taller center section reaches 4 ft while the two flanking panels hold at 3 ft, creating a natural hierarchy that draws the eye upward toward whatever headline message you place at the peak. This is not just a cosmetic distinction — the recessed side panels also create shallow display ledges useful for brochure holders, small product samples, or demo tablets if your booth workflow calls for them.

The aluminum tube frame assembles without tools using the EZ Connect push-button snap system. Sections lock together firmly, and the fabric graphic sleeves slip over the frame and tension into place without wrinkles or sagging. Because the graphics are removable and replaceable, you can refresh the artwork for a new campaign, a seasonal promotion, or a rebranded event without buying a new frame — a practical advantage for brands that exhibit more than two or three times a year.

As part of the broader EZ Mod modular display ecosystem, this kit is engineered to connect and combine with other EZ Mod panels, meaning the 10 ft configuration you deploy today can expand into a larger island or inline layout if your show schedule grows.

Walking Through a Real Setup Scenario

Picture a regional home improvement expo with exhibitors packed into a 10 ft inline booth corridor. You unzip the carry bag at 7:30 a.m. and lay out the frame sections. Snapping the tube connectors together takes roughly ten minutes without any tools on the floor — no rubber mallet, no Allen wrench, no second person required, though a helper speeds things up. The fabric graphic panels slide onto the assembled frame from the top, tensioning as they go. By 8:00 a.m. both the front and rear graphic faces are live, showing your product photography on one side and your promotional offer on the other.

Traffic flows through the aisle from both directions all morning. Attendees approaching from the left see one branded message; attendees returning from the right see a second complementary message. That two-sided exposure effectively doubles your visual real estate without requiring a larger footprint or a premium corner location. At tear-down, the graphics come off the frame in minutes, the tubes nest together, and the whole kit goes back into the bag. Load-out is done before the neighboring exhibitor has finished rolling up their carpet.

This is the practical case for the ez tube connect 10ft kit b double sided in a competitive show environment.

Frequently Asked Questions

Can the graphics be reprinted independently of the frame?

Yes. The dye-sublimation fabric panels are sold and produced separately from the aluminum tube hardware. If your branding changes or you simply want a fresh look for a new season, you order replacement graphic sleeves and slip them over the existing frame. The frame itself is built to last through many event cycles, so your long-term cost per show drops significantly after the initial investment.

Is the ez tube connect 10ft kit b double sided compatible with other EZ Mod panels?

It is. The connector system is consistent across the ez mod booth product line, which means you can attach additional panels, create angled configurations, or link this kit with a neighboring display unit. For a deeper look at how modular systems compare to custom-built exhibits before you commit, the modular trade show display guide walks through the key trade-offs in plain language.

What file format and resolution do I need to submit for printing?

Artwork should be submitted as a high-resolution PDF or layered AI file at the correct print dimensions. The Showfire Displays team reviews every file before production, and if anything falls below the minimum resolution threshold for dye-sublimation output, you will hear about it before the job goes to press — not after.

Ready to Put a Double-Sided 10 ft. Display to Work for You?

If a single-sided backdrop leaves part of your booth invisible to half your audience, the ez tube connect 10ft kit b double sided closes that gap cleanly. The custom ez connect modular platform behind this kit is built for exhibitors who want professional results without a professional production crew on-site, and the ezmod modular display system gives you room to grow into larger configurations as your program evolves. You can also explore the full custom ez mod display range to see how other panel sizes and shapes might complement this kit in a multi-event lineup. Place your order today and get a display that works from both sides of the aisle.