EZ Tube Connect 10 ft. Kit A (2 x 5 x 2 ft) – Single-Sided

Graphic Packages Include:

• (2) Top cross bar – 2ft. slope
• (2) Bottom cross bar – 2ft.
• (1) Top cross bar – 5ft. slope
• (1) Bottom cross bar – 5ft
• (6) 3-section 64″ pole
• (6) Bottom cross bar L shape connector
• (2) Single foot – 34mm
• (2) Double Foot – 34mm
• (4) Connecting clip
• (2) Soft Bag – 2ft.
• (5) Soft bag – 5ft.
• (1) Single- or Double-Sided Graphics
• (1) Medium Hard Case

Features:

• Material: Stretch Fabric
• Display Size: 120″W x 90″H x 18.75″D
• Shipping Dimensions: 26″W x 17″H x 16″D
• Shipping Weight: 62 lbs (frames and graphics)

The Problem This Kit Is Built to Solve

Exhibitors running a 10 ft. inline booth often hit the same wall: pre-built pipe-and-drape looks thin, a full custom exhibit costs far more than the event ROI justifies, and generic pop-up systems rarely hold their shape past the third show. What they actually need is a display that photographs well, travels easily, and does not require a dedicated setup crew.

The single-sided format is a deliberate answer to that problem. When your back wall faces one direction and the audience approaches from the front, paying for two printed faces is waste — not value. This kit keeps the investment proportional to how the space actually gets used.

How the Frame and Graphic System Work Together

The aluminum tube frame at the core of this display is lightweight without feeling fragile. Tubes interlock through connector nodes that hold their position reliably, giving the finished structure a rigidity that pop-up frames often lack. The center panel stands 5 ft. wide, and the two flanking 2 ft. wings create depth and dimensionality that a flat single-panel backdrop cannot match.

The graphic wraps the frame using a pillowcase-style fabric sleeve — no velcro strips, no alignment guesswork. Pull it over the frame, zip or tuck the closure, and the print is taut and wrinkle-resistant. Fabric dye-sublimation printing reproduces brand colors accurately edge to edge, so your booth graphic matches your other brand materials rather than approximating them.

For buyers comparing this against other formats in the line, the ez connect ez mod family includes kit sizes and shapes that extend well beyond 10 ft. — useful context if your floor plan grows between events.

Practical Specs Worth Knowing Before You Order

Before placing an order, it helps to have the key numbers confirmed. Here is what to keep in mind for this configuration:

Footprint and Frame

This kit assembles to a finished width of 10 ft. (2 ft. + 5 ft. + 2 ft.) with a depth determined by the angle of the wing connectors. The aluminum tube frame is finished in a silver-tone powder coat. Total hardware weight is well within standard airline baggage limits, and the kit ships with a carry bag designed for the assembled components.

Graphic and Print Specifications

The graphic system uses dye-sublimated fabric on a polyester substrate. Artwork should be submitted at the full bleed dimensions provided in the print template, in CMYK color mode, at the recommended resolution. The single-sided print covers the front face only — the frame back remains clean and unfaced, which is standard for a back-wall application.

Reordering and Refresh Cycles

Because the frame and graphic are sold and stored separately, refreshing your display for a new campaign means ordering new fabric only — not a full new kit. If you exhibit more than twice a year, that flexibility compounds into meaningful cost savings over a multi-year display program. For buyers still deciding between display systems, the modular trade show display guide at Showfire breaks down how modular formats compare across event frequencies and budget tiers.

Where This Kit Gets Used Most

The 2 ft. x 5 ft. x 2 ft. configuration fits naturally behind a 10 ft. table display, at the back of an inline trade show booth, or as a branded backdrop for photography, presentations, and corporate events. The ez tube connect 10ft kit a single sided is a reliable choice for regional trade show circuits where the same display travels to multiple venues per year and must perform consistently across varying venue lighting.

It also fits well into mixed exhibit programs. Companies that run a larger island exhibit at their anchor shows sometimes use the ez tube connect 10ft kit a single sided as a secondary presence at smaller regional events — same brand, scaled footprint. The broader EZ Connect display line supports that kind of multi-scale strategy, with hardware components that share design language across kit sizes.

If you are building a complete exhibit strategy from scratch, reviewing the custom modular booth design resources on the Showfire site will help you slot this kit into a broader plan with confidence.

Configure Your Kit and Order Today

The ez tube connect 10ft kit a single sided is available now through Showfire Displays, with custom graphic printing included. Upload your artwork, confirm your configuration, and your kit ships fully printed and ready for your next event. The ez mod booth page has the full range of available configurations if you want to compare sizes before committing — but if 10 ft. inline is your format, this kit covers the brief cleanly. Place your order today and have a display program that travels, repeats, and performs.