4ft x 4ft x 12ft Big Sky Square Tower Display – Non-Backlit – Black Frame (Stretch Graphic Package)

4 Ft. Big Sky Tower 60D BLACK Stretch Graphic Package Only Includes:

• (4) SEG Graphics
• (12) 60D Vertical Extrusions
• (8) 40CG Horizontal Extrusions
• (8) Split Connectors
• (2) Support Struts
• (1) Torx Key
• (1) La Caja Hard Case w/Wheels

• Graphic Size: 48″w x 144″h
• Graphic Material: Stretch Fabric Dye-Sub
• Display Size: 4’W x 12’H x 4’D
• Warranty: Lifetime on Frame
• Shipping Weight: 76 lbs
• Shipping Dims: 48″L x 18″W x 11.5″H

From Carton to Show Floor — How Setup Actually Works

Getting this tower from shipping container to finished display is a straightforward process most exhibitors complete in under 20 minutes.

1. Open and sort the hardware. The aluminum frame sections and connector nodes are packed in a single rolling case. Lay out all pieces on a clean surface and confirm each section against the included packing list before you begin.
2. Build the base. Snap the bottom frame tier together first to create a stable foundation. The black extrusion locking mechanism clicks into place and holds under lateral pressure without separate fasteners.
3. Stack the vertical sections. Slide each vertical column piece into the connector nodes, working your way upward. The modular design means no single section is too heavy to lift solo, even at 12 feet of finished height.
4. Pull on the stretch graphic. Starting from the top, work the fabric over the frame the way you would fit a pillowcase. The tension built into the fabric eliminates wrinkles and keeps the print surface drum-tight across all four faces.
5. Lock the top cap. The crown piece slides onto the uppermost frame node and secures the graphic at the apex, completing the clean finished look.
6. Position and you are done. No staking, no ballast, no power drop — just roll the case out of sight and step back.

Frame, Fabric, and Finish — What a Buyer Notices Up Close

The black powder-coat finish on the aluminum extrusion frame reads as intentional and polished, not industrial. Sharp corner miters give the column crisp edges on all four sides, which matters when attendees are standing within arm’s reach at a 10 x 10 or 10 x 20 booth. This is a legitimate black frame tower display — not a dark grey compromise — so it pairs cleanly with black flooring, backlit counters, and other dark booth furniture without fighting for contrast.

The stretch fabric itself is dye-sublimation printed on a fabric engineered for pillow tension displays. Color gamut is wide, saturation holds at viewing distances from 2 feet to 20 feet, and the material is wrinkle-resistant enough that it does not need to be re-steamed between shows even after folding into the carry bag. Edge-to-edge printing means no white borders interrupt the graphic — what you designed is exactly what exhibitors and attendees see wrapped around the frame.

For buyers evaluating this 12ft fabric tower display against alternatives in the category, the key distinction is finish fidelity: the combination of tight fabric tension, corner geometry, and dye-sub printing produces a surface that holds graphic detail far better than vinyl wraps or direct-print banner materials in the same price class.

Pairing This Tower With Other Displays in the Same Category

A single 4 x 4 x 12 column is a strong centerpiece for a 10 x 10 inline booth, but many exhibitors use two or three towers together to define a corridor, flank a reception counter, or anchor the corners of a 20 x 20 island. Because all sizes in the non illuminated tower family share the same extrusion system and connector logic, adding a second tower to your inventory does not introduce a new learning curve for your show crew.

If your venues vary — some brightly lit convention halls, some dimly lit hotel ballrooms — it is worth knowing that a backlit trade show tower version of this frame is also available. The illuminated variant uses the identical footprint system, so transitioning between the two formats for different events is straightforward.

For a broader look at how vertical displays compare to other exhibit structures, the freestanding tower display planning guide covers configuration decisions, graphic file specifications, and venue considerations in useful detail. And if you want to browse the full range of heights and footprints before committing, the portable tower display section of the site lists every available configuration in one place.

The 4x4x12 non backlit big sky square tower display black frame is also a natural complement to fabric counters, banner walls, and hanging signs — all structures that share the fabric-forward aesthetic and pack into similar carry cases.

Configure and Order Your Tower Today

The 4x4x12 non backlit big sky square tower display black frame is available now with the stretch graphic package included. Upload your print-ready artwork file at checkout, confirm your configuration, and this exhibit pillar ships fast. Questions about file specs or sizing? Reach the Showfire Displays team directly through the product page and get answers before you commit. Your next show deserves a display built to hold up across every event on your calendar — order yours today.