1.3 x 2.4 ft. QSEG Single Frame Display Kit

Display Size: 15.75″W x 29.5″H x 10.25″D

Graphic Size: 15.75“W x 29.5“H

Package Includes

• (2) SEG Dye Sub Fabric Graphics
• (2) Horizontal Profiles
• (2) Vertical Profile Top
• (2) Vertical Profile Bottom
• (2) Foot (full)
• (1) Travel Bag

From Box to Booth Floor — How Setup Actually Works

Getting the 1.3 x 2.4 ft qseg single frame display show-ready is a straightforward five-step process, and no tools are required.

1. Unbox and lay out the extrusion sections. Each aluminum extrusion piece is pre-cut and color-coded, so identifying which bar goes where takes seconds. Lay all pieces flat on a clean surface before you start snapping anything together.

1. Connect the corner brackets. Slide the locking corner connectors onto each extrusion end. A firm push seats them fully — you will feel a subtle click when the connection is secure. The frame holds its rectangle without fasteners or tape.

1. Stand the frame upright. Once the rectangle is assembled, place it on its base feet. The feet ship pre-attached and do not require adjustment for standard flat surfaces.

1. Load the graphic. Slide the silicone bead running around the perimeter of your fabric graphic into the channel groove on the inside face of the extrusion. Work from the top corners outward so tension distributes evenly.

1. Tension and inspect. Give the fabric a light hand-smooth from the center outward to confirm even tension. The SEG channel holds the beading securely — no additional clamps, velcro, or double-sided tape.

The whole process typically takes under ten minutes the first time and under five once you have done it twice.

What You See Up Close — Print, Fabric, and Finish Details

A small display lives or dies by how it looks at arm’s length, and the 1.3 x 2.4 ft qseg single frame display holds up to that scrutiny. Graphics are produced on a lightweight dye-sublimation fabric that reproduces photography-grade color gradients, tight typography, and fine logo details without banding or saturation loss. The silicone-edge bead is sewn directly onto the graphic panel before it ships, so you are not wrestling with a fiddly separate strip during setup.

The aluminum extrusion itself has a low-profile matte silver finish that recedes visually and lets the graphic dominate. Frame edges are chamfered and smooth — no sharp corners, no exposed fastener heads. If you are positioning this as a counter-height display or a retail shelf accent, those tactile details matter to the people walking past it.

Graphic replacement is straightforward: when you are ready for a new campaign, simply pull the bead out of the channel and slide a new panel in. The frame itself carries indefinitely through graphic cycles, making the qseg modular kit approach genuinely cost-efficient over a multi-year show schedule.

Pairing This Frame With Other Qseg Products

The 1.3 x 2.4 ft qseg single frame display is purposefully sized to work alongside larger Qseg configurations rather than in isolation. If your booth needs a full backwall in addition to this accent panel, the qseg tradeshow display line offers multi-frame configurations from compact 10-foot builds up through larger island arrangements — all using the same extrusion system and SEG graphic format, so the visual language stays consistent across every piece.

For environments where you need both branding and space division — a pop-up retail event, a conference breakout room, or a vaccination clinic — the qseg partition wall range adds functional room-division capability to your Qseg hardware investment. Mixing a single-panel qseg single frame backwall for signage with a Qseg partition behind a reception desk is a common and practical combination.

If you are still weighing your overall booth strategy, the modular trade show display guide on Showfire Displays covers frame systems, graphic specs, and configuration logic in depth — useful reading before you finalize which pieces belong in your kit.

For a broader look at every Qseg size and format available, the full Qseg modular display catalog is the right starting point.

Ready to Order Your 1.3 x 2.4 ft Qseg Single Frame Display?

A custom qseg single frame in this footprint is one of the fastest ways to add a polished, branded touchpoint to any event, retail, or corporate environment without committing to a large booth build. Configure your 1.3 x 2.4 ft qseg single frame display today — choose your finish, submit your artwork, and get a display that is ready to work as hard as the rest of your exhibit kit. Questions about sizing, graphic files, or bulk orders? Contact the Showfire Displays team directly for a fast, no-pressure quote.