10×10 ft. Modco 4 Modular Display – Graphic Package

Includes:

• SEG Dye Sub Fabric Graphics w/ integrated blockout
• (6) 992×2418 Frames
• (1) 992×1984 Frame
• (1) 774×992 Curved Frame
• (4) Cover Profile Pin Connectors
• (4) Cover Profile Screw Nuts
• (10) 90° Middle Connectors
• (4) 90° Top/Bottom Connectors
• (4) 180° Straight Connectors
• (4) 180° Barrel Connectors
• (48) Pin Connectors
• (22) Clip Connectors
• (8) Cover Profiles
• (2) Curved Cover Profiles
• (32) Frame Protectors
• (4) Curved Connectors
• (1) Heavy Duty Crate

• Display Size: 117″W x 98″H x 117″D
• Graphic Size:
• 39.125″W x 95.25″H
• 117.125″W x 95.25″H
• 39.125″W x 78.125″H
• 39.625″W x 31″H
• 39.625″W x 27.75″H
• 39.125″W x 97.75″H

What the 10×10 Modco 4 Configuration Includes

The Modco 4 graphic package is not a bare structure you finish later — it ships as a coordinated unit. Here is exactly what arrives and how it goes up:

1. Unbox and inventory the panels. The hard panels come individually wrapped and labeled. Lay them out in sequence before you start; the numbering tells you the build order and prevents backtracking.
2. Lock the frame connectors. Modco uses a channel-and-lock system that clicks together without tools. Align each connector, press to seat, and move on — the process takes minutes per joint.
3. Hang the graphic panels. Printed panels slot into the frame channels. Because the graphics are sized to the structure at the factory, they drop in flush with no trimming or stretching.
4. Attach the monitor mount (if configured). The Modco 4 layout supports an integrated monitor arm on the center section. Slide the arm onto the designated frame rail, tighten the single thumb knob, and the display is ready for a screen.
5. Final check and dress. Step back, confirm all panels are seated, straighten any accessories, and the booth is show-ready.

From cart to complete, most exhibitors report a setup time under 30 minutes working solo.

Print Quality and Surface Details That Show at Close Range

Buyers often evaluate a booth from the aisle, but attendees evaluate it at arm’s length — and that is where the Modco 4 graphic package distinguishes itself. Graphics are printed at high resolution on rigid substrates that eliminate the micro-ripple common on fabric panels. Colors are rendered with a wide gamut process that keeps brand hues accurate across every panel in the set, which matters because mismatched panels are one of the most common complaints on multi-panel systems.

The panel surface carries a subtle texture that diffuses glare without dulling color saturation, making the display look equally good under the fluorescent wash of a convention center and the directional spotlighting of a hotel ballroom. Edge-to-edge print coverage means there are no raw borders interrupting the visual field. If your brand relies on photography or gradient artwork, the rigid substrate reproduces those elements with the kind of fidelity you normally associate with large-format print shops rather than exhibit hardware.

This level of close-up quality is part of what makes the 10×10 modco 4 modular display a repeat purchase for brands that exhibit more than two or three times a year — the finish survives multiple installs without the scuffing or color shift that shortens the life of softer panel systems.

Pairing This Display With Other Modco Formats and Sibling Systems

The 10×10 modco 4 modular display works well as a standalone inline booth, but it also fits into a larger exhibit program without friction. Modco hardware is designed to be reconfigured and combined, so an exhibitor who starts with this 10-foot configuration can expand into a 20-foot or island layout by adding panels and connectors rather than replacing the whole system. That scalability is covered in depth in the modular display buying guide, which walks through how to forecast your exhibit needs before committing to a configuration.

If your team sometimes exhibits in spaces that require a lighter carry weight, the Qseg modular display is worth comparing — it uses a fabric-panel SEG construction that reduces pack weight significantly while still offering a clean graphic finish. For exhibitors who prioritize the fastest possible swap between graphic sets, the EZ Connect modular system is designed around tool-free graphic changeouts, which can be useful when a brand runs multiple campaigns across a single show season.

Both are available through the broader modular trade show displays collection, where you can compare frame types, footprints, and graphic options side by side.

The custom modco display format holds a specific advantage for brands that need dimensional rigidity — retail, medical device, and industrial exhibitors tend to prefer hard panels because they convey substance rather than softness. When the Modco 4 is configured as a modco display with monitor mount, the integrated arm keeps the screen at eye level without a pedestal eating into the floor footprint, which matters in a 10-foot space where every square foot counts.

Order Your 10×10 Modco 4 Modular Display

Configuring this display is straightforward. Select your graphic package options — artwork upload, monitor mount, and any accessory rails — and submit your files at checkout. If you are not familiar with what format or resolution to provide, the modular trade show display guide includes a file-prep section that covers bleed, resolution, and color profile requirements.

The 10×10 modco 4 modular display ships complete and ready to build. Whether this is your first Modco or a replacement graphic package for a system you already own, the order process is the same — and your booth will be show-ready faster than you expect. Configure yours today and get your graphic package on its way.