10×10 ft. Modco 14 Modular Display – Graphic Package

Includes:

• SEG Dye Sub Fabric Graphics w/ integrated blockout
• (5) 992×2418 Frames
• (4) 180° Straight Connectors
• (4) 180° Barrel Connectors
• (2) 90° Top/Bottom Connectors
• (4) 90° Middle Connectors
• (16) Clip Connectors
• (20) Pin Connectors
• (20) Frame Protectors
• (6) Cover Profiles
• (1) Heavy Duty Pallet

• Display Size: 117″W x 95″H x 97.6″D
• Graphic Size: 
• 117.125″W x 95.25″H and 95.25″W x 39.125″H

From Floor Case to Finished Booth: Setting Up the Modco 14

One of the practical strengths of the 10×10 modco 14 modular display is how predictably the setup sequence runs, even at a new venue without a dedicated install crew.

1. Unpack and inventory panels. The display ships in a protective floor case that doubles as a storage cart. Open it at your booth space, confirm all panels and hardware are present, and lay them in the order you plan to connect them.
2. Connect the frame columns. The Modco system uses a clip-based aluminum extrusion that snaps panels together without loose screws or specialty tools. Each connection point is labeled, so first-time assemblers can follow the sequence without referencing a manual.
3. Mount the graphic panels. Printed panels attach directly to the frame structure. Align each panel at the top channel first, press it flush, and secure the bottom — a two-person process that takes under two minutes per panel.
4. Attach accessories. If your configuration includes a modco display with monitor mount, bracket hardware, or shelves, those attach to the frame extrusion at this stage using the same tool-free clip system.
5. Level and dress the booth. Minor adjustments at the base feet bring the display plumb on uneven concrete or carpet. Step back, confirm panel alignment, and the exhibit is ready for show-open.

Tear-down reverses the same steps and typically runs faster than assembly once your team has done it once.

Panel Construction and Print Quality Up Close

The Modco 14 graphic package uses high-resolution direct printing on rigid substrate panels rather than stretched fabric or vinyl overlays. Up close — where a prospect is standing at your counter — that distinction matters because panel graphics hold detail that fabric systems tend to lose at tight viewing distances.

Color is reproduced against a white substrate base, which keeps mid-tones accurate and prevents the color shift that darker base materials introduce. Bleed extends to the panel edge, so there are no white borders interrupting the visual field across the full 10 ft. width. Panel surfaces are finished to resist scuffs and minor abrasion, which is worth noting if your shows involve high foot traffic or repeated assembly by rotating staff.

Graphics on individual panels can be reprinted and swapped independently, which means you can refresh messaging for a seasonal campaign or a new product line without replacing the entire modco hard panel display structure.

How This Kit Fits With Other Modular Formats in Your Program

Exhibitors who run multi-show programs often carry more than one exhibit format — a compact 10 ft. configuration for regional events and a larger inline or island footprint for flagship shows. The Modco modular display line is designed with that kind of scalability in mind, and the Modco 14 sits at a size that bridges single-exhibitor booths and small team setups comfortably.

If your event schedule includes outdoor activations or venues where lightweight fabric systems perform better, the Qseg modular display offers a silicone-edge graphic format in a similar footprint that complements the hard-panel Modco without duplicating it. For programs that prioritize fast setup above all else, the EZ Connect modular tube-and-fabric system is worth reviewing as a secondary exhibit that travels more compactly.

Thinking through which format fits which event type is a decision the modular display buying guide covers in practical depth — it includes a side-by-side breakdown of panel types, frame systems, and graphic options that helps narrow the field before you configure. The broader modular trade show displays catalog is also worth browsing if you are evaluating size options above or below the 10 ft. inline footprint.

Modco with shelves configurations are available across the Modco line, and if product display or literature distribution is part of your booth strategy, those accessories integrate directly into the same frame without modifications.

Ready to Configure Your 10×10 Modco 14 Modular Display?

This is a modco for trade show environments where panel rigidity, print accuracy, and multi-show durability are non-negotiable. The modco modular kit format keeps configuration simple, and the graphic package included with this listing means your order arrives as a complete, ready-to-assemble exhibit rather than a frame you still need to graphic-source separately.

The 10×10 modco 14 modular display is in stock and available to configure now. Select your graphic specifications on the product page, upload your artwork, and our production team handles the rest. Order yours today and have your exhibit ready for your next show date.