10 ft x 7.5 ft Lumiere Backlit Light Wall Kit – Single-Sided

Lumiere Light Wall 10 ft. x 7.5 ft. Frontlit Graphic Package Includes:

• (1) Pop Up Frame
• (4) 3-Section Channel Bars
• (4) 4-Section Channel Bars
• (1) Channel Bar Bag
• (1) Carry Bag (for frame)
• (12) Ladder Light Sets
• (4) Travel Bag for Ladder Lights
• (4) Transformers
• (4) Transformer Power Cord
• (1) Main Backlit Graphic
• (1) Large Blockout Backer
• (2) End Caps (either block out or printed)

Display Dimensions: 117.75″ W x 88.75″ H x 14.5″ D
Graphic Dimensions: 117.5″ W x 88″ H
Shipping Weight: 34 lbs (with graphics)
Shipping Dimensions: 34″ L x 14″ W x 9″ H

When Seventy-Five Square Feet of Backlit Graphic Does the Selling for You

Not every booth position calls for a 10-foot-wide backlit wall — but when you have a standard 10-foot inline booth or an island anchor point that needs a strong back wall, this format fills it precisely. At 7.5 feet tall, the graphic clears the sightlines of most convention hall traffic and reads well even when adjacent booths have competing signage. The single-sided configuration is the right choice when the display sits against a wall or draped perimeter — all of the LED output goes forward, maximizing brightness toward your audience rather than splitting it. Retailers staging a seasonal feature wall, brands shooting product photography that needs a lit backdrop, and marketers running corporate breakroom branding programs all reach for this size for the same reason: it is large enough to hold complex imagery and small enough to reconfigure quickly. For a broader look at how this format fits into different exhibit strategies, the SEG backlit display guide at Showfire Displays covers the trade-offs between single and double sided builds, frame types, and graphic spec requirements in useful detail.

Hardware, Materials, and Print — What the Package Delivers

The Lumiere frame is engineered from lightweight aluminum extrusion with a profile designed specifically to accept SEG-hemmed fabric graphics. The silicone bead is sewn directly into the perimeter of the fabric, then pressed into the channel by hand — no tools, no adhesives, no alignment jigs. Below is a quick reference of what this display is made of:

The custom 10ft x 7.5ft lumiere backlit display graphic is produced using dye-sublimation printing, which bonds ink into the polyester fibers of the fabric rather than sitting on the surface. That process produces richer, deeper color saturation than vinyl or paper-based media, and the fabric itself holds up to repeated removal, washing, and reinstallation without cracking or peeling. Because the Lumiere frame is part of the broader lumiere backlit display family, replacement graphics ordered in future cycles drop straight into the same frame — no hardware changes, no re-purchasing the extrusion.

Longevity, Graphic Refresh, and the Real Cost Over Time

A common mistake at purchasing time is comparing only the upfront 10ft x 7.5ft lumiere backlit display price against the price of a non-lit alternative. The fairer comparison accounts for what each format costs across three or four shows, because that is where the Lumiere system gains ground. The aluminum extrusion is rated for heavy repeat use — exhibitors routinely run the same frame through dozens of shows before any hardware service is needed. Graphic refreshes are the primary ongoing cost, and because the SEG fabric separates cleanly from the frame, you can have a new graphic printed and delivered without shipping back any hardware. The 10ft x 7.5ft lumiere backlit with led system also draws modest power, so extended daily runtime during multi-day events does not translate into meaningful electrical surcharges at the venue.

If your display kit includes smaller accent pieces alongside this main wall, the 5ft x 7.5ft lumiere backlit display runs on the same frame system and graphic process, which means your print vendor can handle both graphics in a single production run. For booth configurations where a slim vertical accent fills a gap or frames a doorway, the 2.5ft x 7.5ft SEG backlit display shares the same toolless assembly logic and is easy to add as a flanking element without complicating your setup workflow.

The seg lumiere 10ft format is also easier to maintain across a multi-event calendar than most exhibitors expect. Store the frame flat or upright in its carry case, fold the fabric graphic loosely, and both components are ready for the next show without any prep beyond visual inspection. Minor wrinkles in the fabric — if any develop during storage — relax out under the heat of the LEDs within minutes of powering on.

Put This 10ft x 7.5ft Single Sided SEG Backlit Display to Work at Your Next Show

If the size, brightness, and build quality described here match what your next exhibit needs, the path forward is straightforward. Configure your custom 10ft x 7.5ft lumiere backlit display with your artwork, confirm your graphic files meet the provided print-ready templates, and place your order directly through Showfire Displays. The Lumiere team handles production and ships the complete package — frame and graphic together — so everything arrives ready for assembly. Questions about file setup, lead times, or bulk pricing for multi-unit orders can be directed to the Showfire team before checkout. Order your 10ft x 7.5ft SEG backlit display today and have this wall ready before your next event date.