Lumiere Light Wall 10 ft. x 7.5 ft. Frontlit Graphic Package Includes:
• (1) Pop Up Frame
• (4) 3-Section Channel Bars
• (4) 4-Section Channel Bars
• (1) Channel Bar Bag
• (1) Carry Bag (for frame)
• (12) Ladder Light Sets
• (4) Travel Bag for Ladder Lights
• (4) Transformers
• (4) Transformer Power Cord
• (2) Large Backlit Graphic
• (2) End Caps (either block out or printed)
Display Dimensions:Â 117.75″ W x 88.75″ H x 14.5″ D
Graphic Dimensions:Â 117.5″ W x 88″ H
Frame Shipping Weight:Â 38 lbs (including graphics)
Frame Shipping Dimensions:Â 34″ L x 14″ W x 9″ H
Ladder Light Shipping Weight:Â 32 lbs
Ladder Light Shipping Dims:Â 7.5″ L x 5.5″ W x 30.5″ H
How the 10ft x 7.5ft Double Sided SEG Backlit Display Stacks Up Against the Alternatives
Choosing the right format means understanding what you are giving up — or gaining — compared to closely related options. The table below puts this display alongside two practical alternatives so you can weigh the trade-offs before placing an order.
| Criteria | 10ft x 7.5ft Double Sided | 10ft x 7.5ft Single Sided | 5ft x 7.5ft Double Sided |
|---|---|---|---|
| Viewable sides | 2 | 1 | 2 |
| Total lit graphic area | ~150 sq ft | ~75 sq ft | ~75 sq ft |
| Best for | Open-floor, island, and aisle booths | Back-wall or corner placements | Narrower aisles or accent positions |
| Graphic investment | Two panels required | One panel required | Two panels, smaller format |
| Footprint width | 10 ft | 10 ft | 5 ft |
The double sided configuration earns its higher graphic cost back quickly in any open-floor environment — you are essentially getting two full-scale campaign faces for one frame. If your booth backs against a wall and traffic only flows from one direction, the single sided version may be the smarter spend, and our backlit display buying guide walks through that decision in detail. On the other hand, exhibitors working narrower footprints should look at the 5ft x 7.5ft lumiere backlit display as a right-sized alternative before committing to the wider frame.
Where This Configuration Performs Best
The 10ft x 7.5ft lumiere backlit display was sized for situations where visibility from multiple directions is non-negotiable. Here is where it consistently outperforms narrower or single sided alternatives:
- Island and peninsula booths — When four-sided or three-sided traffic is the norm, double sided illumination ensures no passerby sees a blank frame back.
- Wide aisle positions — A 10-foot-wide lit graphic fills the natural sightline of a convention center aisle without competing formats fighting for the same space.
- Retail pop-up and experiential events — The consistent LED glow keeps the display readable under ambient retail lighting that would wash out a non-backlit fabric wall.
- Multi-day events — Because the frame stays assembled and the graphics stay tensioned, day-two setup is faster than almost any competitive system.
- Brand launches requiring visual parity — Running identical backlit faces on both sides means every camera angle and every attendee sees the same finished campaign image.
The 10ft x 7.5ft lumiere light box configuration is also a natural fit for permanent or semi-permanent retail installs where the double sided format doubles as an aisle divider with branded content on each face. Brands that need a narrower column-style accent within the same booth sometimes pair this display with a 2.5ft x 7.5ft lumiere backlit display to frame an entry point or highlight a product demo zone without duplicating the full-width footprint.
What You Get With the Lumiere Frame and SEG Graphic System
The Lumiere frame uses a precision-extruded aluminum profile with an integrated silicone channel. Your fabric graphic is finished with a sewn silicone bead around its perimeter; that bead presses into the channel and holds the print in even, wrinkle-free tension across the full 10ft x 7.5ft surface. There are no visible clamps, grommets, or stretcher bars — just a seamless printed face.
The LED light source is engineered to deliver even illumination from edge to edge, avoiding the hot spots and dark corners that can appear in lower-grade lightbox systems. Power runs through the aluminum frame profile itself, keeping cables hidden and the install looking clean from any viewing angle.
Graphic replacement requires no special tools. Pull the old silicone bead out of the channel, press the new one in, and the display is ready for the next campaign. For teams managing multiple events across a year, that swap time is measurable money saved on labor. The full lumiere backlit display range is built on the same extrusion system, so additional frame segments or accessories from other Lumiere configurations are compatible.
For a thorough side-by-side look at how SEG fabric systems compare to pop-up frames and vinyl alternatives, the types of backlit trade show displays reference on this site is worth reading before you finalize your booth kit.
Ready to Put This Display Into Your Next Booth
The 10ft x 7.5ft double sided seg backlit display solves a specific problem — maximum illuminated brand coverage in an open-floor footprint — without requiring a complex rigging plan, a large crew, or a dedicated storage unit. The hardware is reusable across seasons, the graphics are swappable without tools, and the LED system is rated for repeated use across multi-day events. That combination of flexibility and visual output is what makes the 10ft x 7.5ft seg lumiere configuration a reliable centerpiece for exhibitors who show up to win the aisle. Order yours today through the product page and get your campaign moving before the next event date locks in.































