96 in. x 96 in. Igniter Freestanding Light Box – Double-Sided

LED light strip information:

• UL listed LED lighting
• Each Module contains five LED lights
• Input voltage (V): DC24±0.5
• Power Consumption (W): 13W

From Carry Bag to Illuminated Display — Step by Step

The Igniter 96 x 96 double sided freestanding light box is designed to be set up by one or two people without tools, read instructions, or a freight budget that includes an installation crew. Here is how the process works from the moment you open the case:

1. Lay out the aluminum extrusion sections on the booth carpet and identify each channel by length — the system uses a consistent connector design so assembly is intuitive even at your first show.
2. Click the frame together using the integrated snap connectors; the double-sided configuration adds a mirrored rear frame that locks parallel to the front with internal standoff hardware.
3. Feed the LED light panels into their dedicated channels along the interior edge of the frame — no screwdrivers, no cable management puzzles.
4. Run the single low-voltage power cable to a nearby outlet; the entire unit draws modest wattage despite the large illuminated area, which matters in venues with strict electrical limits.
5. Stretch the SEG fabric graphic into the silicone channel that runs the perimeter of each face — start at a corner and work around, and the fabric will pull flush and wrinkle-free by the time you close the last edge.
6. Stand the display upright, confirm it is level, and the booth is ready — total setup time for an experienced user runs under 30 minutes.

Print Quality and What You Notice at Close Range

The fabric graphics produced for this format are printed on dye-sublimation polyester, which means the ink bonds into the weave of the material rather than sitting on top of it. The result is a surface that holds color saturation even when a visitor steps up and examines the graphic from 18 inches away — no pixelation, no banding, and no visible dot pattern. The SEG silicone bead that borders each panel disappears into the aluminum channel, so the finished face shows edge-to-edge imagery with no frame interruption.

Backlighting intensifies contrast and makes dark backgrounds appear genuinely dark while bright colors stay vibrant — a combination that photography and flat printing cannot replicate. Because the LED source is diffused through a polycarbonate panel before it reaches the fabric, the illumination reads as smooth white light rather than a grid of individual bulb points. Graphic replacement down the road is straightforward: order a new fabric panel, remove the old one from the silicone channel, and press the new one in — the hardware never changes.

For guidance on evaluating print finish, LED types, and frame weights across different formats, the single vs double sided backlit display breakdown in the pillar guide covers the decision in detail.

Pairing This Display With Other Formats in the Igniter Line

A 96 x 96 double sided freestanding light box works well as the anchor piece in a multi-element booth, but it rarely has to stand alone. Exhibitors running a 20-foot island often pair it with a backlit counter or a smaller accent panel, both of which share the same aluminum extrusion and SEG graphic system so the visual language stays consistent across the booth. If your budget or booth size points toward a more compact footprint, a portable backlit display from the Portable Light Box line covers smaller configurations while maintaining the same fabric graphic quality.

Exhibitors who need a continuous curved or angled backwall rather than a freestanding center piece may find the backlit fabric pop up display format a stronger match, since that system is optimized for inline booth walls rather than aisle-facing island placement. The backlit displays category page covers the full Showfire lineup in one place if you want to compare formats side by side before committing. Choosing the right pairing depends on whether your priority is double-sided visibility in an open floor plan or maximum linear backwall coverage — the 96 x 96 double sided freestanding light box is built squarely for the former.

Ready to Order

The Igniter 96 x 96 double sided freestanding light box is in stock and ready to ship alongside your custom fabric graphics. If you are early in the planning process and want to understand how this format fits your overall exhibit strategy, the backlit display buying guide walks through sizing, budget, and configuration decisions from the ground up. For exhibitors using this display as an igniter light box for trade show appearances across multiple markets, the hardware’s durability and graphic interchangeability mean the frame pays for itself after just a few events. Place your order today and have a display that is ready before your next show date.