93 in. x 90 in. Igniter Freestanding Light Box with Monitor Mount

This product includes

• (1) Igniter 93″ X 90″ dye-sublimation graphic
• (1) Fabric backer
• (1) Large format light box frame with silver feet
• (1) VESA compatible large monitor mount-supports up to a 50″ LCD screen. Not to exceed 50lbs.
• (1) Large shipping cases with wheels
• (1) Torx wrench
• (1) Allen wrench

LED light strip information:

• Each Module contains five LED lights
• Input voltage (V): DC24±0.5
• Power Consumption (W): 10W
• Material:AL base plate
• Specification (mm): 360mm*23mm*16mm
• Lamp type:Epistar
• Color temperature (K):3000K~7000k
• Beam angle(*):20*60* / 10*45*
• Luminous flux (lm):?750LM
• Lifetime:?20000H
• Protect rate (IP):IP25

How the 93″ x 90″ Size Compares to Similar Freestanding Formats

Not every exhibitor needs the same footprint, and the right choice depends on available floor space, ceiling clearance, and the visual weight you want the display to carry. The 93″ x 90″ freestanding light box monitor display sits in a versatile mid-to-large range — wide enough to anchor a 10 ft. inline booth as the dominant back wall, yet compact enough to fit inside standard venue clearances that would reject a 20 ft. configuration.

If you are outfitting a booth on a tighter budget and do not need the full 93″ width, the portable light box display from the Portable Light Box range offers a leaner entry point with the same SEG construction logic. For exhibitors who prioritize speed over footprint, a backlit pop up display deploys even faster but trades the rigid extrusion frame for a fabric-wrapped pop up structure. The igniter backlit display at this size is the choice when the graphic surface needs to read as one continuous, luminous face — not a workaround.

Where This Display Earns Its Keep

The 93″ x 90″ freestanding light box monitor display is proportioned to perform in spaces where a smaller format would get lost and a larger rig would require extra venue permits or rigging approval. Here are the environments where it consistently delivers the most value:

• Trade show inline booths (10 ft.): The width lands right at the standard 10 ft. back-wall limit, turning the entire back of the booth into a single illuminated graphic surface.
• Island booth accent walls: Placed inside a larger island configuration, this unit defines a zone — reception areas, product demo stations, or featured-collection backdrops.
• Retail pop-up installations: Floor-standing and self-contained, it sets up in a retail corridor or showroom without requiring any wall mounting hardware.
• Corporate lobby and event staging: Permanent or semi-permanent installations benefit from the clean extrusion frame and the ability to swap graphics between campaigns.
• Conference and speaker backdrops: At 90″ tall, the display rises well behind a standing presenter and stays within most stage-rigging clearance zones.

Because the igniter lightbox frame is modular by design, the hardware investment survives graphic refreshes — you purchase new SEG prints for each event cycle rather than replacing the entire structure. That reuse model is what makes this format cost-effective across a multi-show calendar.

Specifications and What the Package Includes

The frame assembles from lightweight aluminum extrusions that click into corner connectors, producing a rigid rectangle that stands on integrated floor feet. LED strip lighting runs inside the frame perimeter, backlighting the fabric panel evenly with no hot spots. The SEG graphic is printed on stretch polyester fabric, finished with a sewn silicone bead that presses into the frame channel for a taut, frameless look.

For a broader look at how this format compares across the full backlit displays category — including single-sided versus double-sided configurations, frame depth options, and accessory kits — review the complete range before finalizing your configuration. If you want structured guidance on sizing, graphic prep, and budget planning, the backlit display buying guide covers the decision framework in detail.

Graphic Production and Ordering Details

Artwork is submitted as a high-resolution print-ready file sized to the display dimensions. The igniter with led frame system requires no special hardware installation — plug into a standard 110V outlet, connect the LED driver, and the panel illuminates immediately. Graphic turnaround follows standard production timelines, and because the SEG channel is standardized across the igniter line, future graphic reprints order directly without re-specifying the frame.

If you need a different footprint within the same system, the custom igniter light box page lists the full size range and configuration options available across the line.

Ready to Put This Display Into Production

The 93″ x 90″ freestanding light box monitor display gives exhibitors a large, luminous graphic surface that installs without tools, travels in a manageable case, and updates with a graphic swap rather than a hardware replacement. For booths where the back wall needs to do real work — holding brand presence, framing a product story, or simply outlasting a dim fabric banner — this configuration is worth the investment. Review the full specs and configure your custom igniter light box today to get your order into production.