118 in. x 96 in. Igniter Freestanding Light Box – Single-Sided

LED light strip information:

• UL listed LED lighting
• Each Module contains five LED lights
• Input voltage (V): DC24±0.5
• Power Consumption (W): 13W

Why the 118″ Wide Format Works at This Scale

The 118″ (roughly 10 feet) width and 96″ height put the graphic surface at a scale where it reads clearly from 20 to 30 feet away — a common sightline distance across busy convention floors. At that span, a single continuous image reads as one cohesive visual rather than a tiled or paneled effect. This is one reason exhibitors specifically search for an igniter light box 10ft format: the proportions suit standard 10 x 10 and 10 x 20 booth packages without spilling past the allocated footprint.

The single-sided configuration means all the LED output is directed at one face, which keeps the draw on your booth’s power circuit lower than a double-sided build at the same size. That matters in halls where electrical is metered or where available circuits are limited. If your floor plan puts the display flush against a back drape or wall, single-sided is the correct choice — you lose nothing by not illuminating a face nobody will see.

What You Actually Receive — Hardware, Graphic, and Cases

The package includes the full aluminum frame kit, the LED lighting module with power cord, and one printed SEG fabric graphic sized and hemmed to fit this specific frame. Carry cases protect the frame sections and lighting components during transport, and the packing configuration is designed so a standard freight carrier can handle it without specialty crating. Frame sections snap together without tools — no hex keys, no mallet — and the SEG graphic pops into the channel groove on all four sides under finger pressure, pulling the fabric drum-tight as the silicone bead seats fully.

The LED strip is rated for thousands of hours of continuous use, meaning the hardware will outlast several graphic refresh cycles before you need to consider any maintenance. When your messaging changes — new product launch, updated branding, seasonal campaign — you order a replacement graphic, swap the fabric in minutes, and the frame stays in service. This reuse model is a significant factor in the real igniter light box price calculation: amortize the frame cost across three or four graphic cycles and the per-show cost drops considerably.

For buyers who want to understand how this fits into the broader category before committing, the backlit display buying guide covers SEG construction, LED output standards, graphic resolution requirements, and how to match display size to booth allocation — all practical information for a first-time buyer or someone upgrading from a non-lit format.

A Mid-Convention Walk-Through — How This Display Performs in Practice

Picture a health-and-wellness brand at a regional trade show, running a 10 x 20 inline booth. They place the 118 x 96 single sided freestanding light box across the full back wall, with a product demonstration counter in front of it. When the hall opens, ambient light from overhead fixtures competes with everything on the floor — banners, screens, hanging signs. The Igniter’s perimeter LEDs hold the graphic brightness at a level that stays visible even under the wash of fluorescent overheads, giving the booth a defined presence without an overhead hanging structure or rigging crew.

As foot traffic builds and the aisle gets noisier, the lit back wall gives attendees a clear visual anchor from 30 feet out. By mid-afternoon, when booth fatigue sets in and many non-lit displays start to look flat, the illuminated graphic still reads with the same consistent brightness it had at opening. At teardown, two staff members disconnect the power cord, unzip the carry cases, pull the SEG graphic from the channel in about five minutes, collapse the frame sections, and pack everything without a tool bag.

Common Questions Before You Buy

Does the 118 x 96 single sided freestanding light box need ceiling rigging or floor anchoring?

No. The frame is self-supporting and floor-standing by design. It does not require ceiling rigging, anchor bolts, or weighted bases. The base feet keep it stable on flat convention flooring under normal conditions.

Can I use a custom igniter light box graphic from a previous campaign in this frame?

Only if the graphic was produced for this exact frame size and SEG channel specification. Graphics hemmed for a different frame dimension will not seat correctly in the channel. When you buy igniter light box hardware, confirm the graphic dimensions match the frame before ordering replacement prints.

What if I need a different format entirely?

If the 10-foot width is more than your floor plan allows, a portable light box display from the Portable Light Box line covers smaller footprints at a lower entry cost. If you need illumination that packs even more compactly for frequent travel, a backlit pop up display is worth comparing — the pop-up mechanism sets up faster and fits in a smaller case, though the overall display area is different. The full backlit trade show display category page shows every format side by side so you can match the right build to your specific space.

Order This Display and Get Your Campaign Moving

The 118 x 96 single sided freestanding light box is a well-proven choice for brands that need broad, evenly lit back-wall coverage without the complexity of rigged or double-sided structures. Frame hardware, LED lighting, and a full custom-printed SEG graphic are included — everything arrives ready to assemble. Place your order today and get your igniter with led display into production.