Wave Tube Modular Booth Kit C5C5C5

This product includes:

• (3) WTMC5 Wave Tube 79″ X 91″-101″ display with graphics
• (2) Display tables left and right
• (2) Medium hard case with graphics

Monitor mounts can support up to 10lbs. 

How the C5C5C5 Configuration Actually Works

The “C5C5C5” designation describes three curved tube sections — each labeled C5 — joined in sequence to form a single continuous arc. Laid out flat, the configuration spans a standard inline booth footprint; erected, the wave curve projects forward at the center and steps back at the shoulders, creating depth without exceeding your contracted space. Here is how a typical setup runs from the case to the show floor:

1. Open the wheeled carry case and lay out the tube segments. The color-coded connectors make orientation obvious — each segment attaches only in the correct direction, so there is no guesswork.
2. Snap the tube sections together at the joints. The push-button locking mechanism clicks firmly into place; a loose connection is audible, so you know immediately if something is not seated.
3. Slide the graphic panels over the frame from the top. The fabric pillowcase sleeves stretch over each curved segment without bunching. Zip the base closed and the panel is taut.
4. Attach the feet and base stabilizers. The weighted feet keep the curve stable on uneven convention center flooring without requiring tie-downs or wall anchors.
5. Connect the sections in sequence and stand the full arc upright. Two people can complete this step comfortably in under ten minutes.
6. Final alignment check. Step back, confirm the wave arc is centered in your space, and adjust the feet as needed. The display is ready.

Total setup time for an experienced crew is typically fifteen to twenty minutes from case open to finished display — competitive with banner stands and far faster than anything requiring an Allen key.

Graphic Quality and Frame Details You Will Notice Up Close

The tube modular display architecture uses a lightweight aluminum alloy tube that is stiff enough to hold the curve under tension without flex or wobble. The C5 curve radius is engineered so the fabric panel sits under consistent tension across the full width — tighter at the center, where the bow is deepest, and equally taut at the shoulders. There are no visible hardware gaps or exposed connectors on the face of the display; the graphic wraps cleanly from edge to edge.

Print is produced on a stretch-polyester dye-sublimation fabric that renders photography and gradient artwork with accurate color reproduction. The material is machine washable, which matters for multi-show deployments where graphics accumulate handling marks between events. Replacement panels are available independently, so a rebranded graphic does not require purchasing a new frame.

For buyers working through their first modular purchase, the modular display buying guide covers fabric print specifications, frame material grades, and how to evaluate graphic bleed requirements before you submit artwork — worth reading before your files go to production.

Placing This Kit Alongside Other Formats in Your Exhibit Program

The wave tube modular booth kit c5c5c5 works well as a standalone inline display, but it also functions as a branded backdrop when combined with a counter, monitor stand, or literature rack in front of the arc. The curved geometry gives a front-positioned accessory visual framing that a flat backwall cannot provide.

If your exhibit program spans multiple venues and you need a complementary straight-wall option for a different show, the EZ Connect modular system connects rigidly into flat or angled configurations using the same tool-free approach. For programs that prioritize ultra-light freight and minimal pack volume, the Qseg modular display offers a silicone-edge graphic system that packs nearly flat and reassembles in minutes.

The broader modular trade show displays catalog includes counters, monitor mounts, and tablet stands that are sized to coordinate with the wave tube footprint — sourcing accessories from the same family simplifies reorder logistics and keeps your booth aesthetic consistent across events.

Configure Your Wave Tube Modular Booth Kit C5C5C5 Today

The custom wave tube display option lets you submit production-ready artwork or work with the Showfire team on a print-ready file — either path gets your graphics into production quickly. The wave tube modular booth kit c5c5c5 ships with the frame, carry case, and your custom graphic panels as a single order, so there are no separate freight invoices to reconcile. Pricing is listed directly on the product page, and the team is available to confirm lead times and answer configuration questions before you commit. Place your order today and have the kit production-scheduled by end of day.