QSEG Double Office Partition

Display Size: 236″W x 88.5″H x 118″D

Graphic Size: 41.5″W x 91″H

Graphic Material: Dye Sub Stretch Fabric

Package Includes

• SEG Dye Sub Fabric Graphics
• (3) QSEG-100×225
• (4) QSEG-300×225
• (4) QSEG-LCON (pair)
• (2) QSEG-TCON

Three Things to Confirm Before You Place Your Order

How Much Footprint Can Your Layout Absorb?

The double configuration spans two panel widths, so measure your available floor space before committing. Account for walking clearance on both sides of the partition and note whether the panels will run along a wall or stand freestanding in open space — the two orientations affect which connector hardware you need. If your plan calls for four separate zones rather than two, the qseg office partition range includes larger configurations that scale the same frame system up without introducing new components.

Is Your Artwork File Ready for Fabric Output?

Silicone-edge fabric printing demands a higher-resolution source file than most vinyl or foam-board formats, and the print template for the qseg double office partition has specific bleed and safe-zone dimensions you must follow. Submit files as high-resolution PDFs or layered files with all fonts embedded. If you are still in the design phase, the Showfire team can share print templates and walk you through the setup — just reach out before you finalize artwork.

Will the Partition Stand Alone or Connect to Adjacent Hardware?

The Qseg frame system is engineered for modularity, which means these panels can connect directly to other Qseg components using compatible corner and inline connectors. If you are also running a booth backdrop or header, take a look at the Qseg single frame display options to see which panel sizes align with the double partition’s frame extrusion dimensions. Knowing your connection points in advance prevents on-site improvisation.

What Separates This Double Panel From a Generic Qseg Room Divider

Most portable partition products on the market are either too light to stay upright in a busy venue or so heavy that a two-person crew is a logistical necessity. The qseg double office partition sits in a different category: the aluminum extrusion frame is rigid enough to stand confidently on a hard floor without ballast, yet lightweight enough for one person to carry and assemble in under fifteen minutes. That combination is genuinely useful at events where booth time is limited and labor costs add up fast.

The silicone-edge fabric system is the detail that separates qseg divider panels from alternatives that rely on hook-and-loop or retractable mechanisms. Fabric is tucked into a routed channel along the inside edge of the extrusion, and the silicone bead grips the channel walls under tension. The result is a drum-tight surface with no visible frame gap, no sagging center, and no raw edge. When the event ends, the fabric pulls free cleanly, folds small, and stores without creasing if handled correctly — making it ready for the next install without a reprint.

Custom graphics are where this system pays for itself over time. Because the custom qseg partitions in the Showfire catalog are designed for repeat use, you can order a new fabric print for a seasonal campaign while reusing the same frame hardware across multiple events. That means your per-event cost drops with every additional activation. Brands that exhibit quarterly or run a rotating schedule of pop-up installations get the clearest return on that investment.

The qseg booth partition configuration also plays well with the broader Qseg ecosystem. If your program includes a full exhibit booth alongside office-style partitioned areas, the Qseg trade show booth range shares compatible frame geometry, so the visual language stays consistent and component storage stays organized. For teams managing both conference room setups and exhibit floors, that interoperability reduces the inventory headache considerably.

To understand how the Qseg frame system positions itself relative to other portable display formats, the modular trade show display guide on Showfire’s resource hub breaks down the key differences between modular, custom, and hybrid exhibit systems — useful reading before you commit a budget to any single display format. And if you want to see the full range of frame sizes and partition types built on the same Qseg platform, the Qseg modular display collection is the best starting point for browsing the complete lineup.

Ready to Add the Double Configuration to Your Display Program?

The qseg double office partition is a straightforward investment that returns value every time you pull it out of the carry bag. Durable frames, vibrant fabric graphics, and a setup process that does not require tools or a second set of hands — that combination works for corporate offices, event venues, trade show floors, and anywhere else you need defined space without a construction crew. Configure your panels, upload your artwork, and get your order started today. The Showfire team is available to answer spec questions, confirm file requirements, and help you get the right kit for your layout.