10 ft x 7.5 ft SEGO Modular Lightbox – Double-Sided

Features:

• Display Dimensions: 118″w x 88.25″h x 16.5″d
• Graphic Dimensions: 118.625″w x 88.625″h
• Shipping Weight: 63 lbs (box 1) and 29 lbs (box 2)
• Shipping Dimensions: 54.5″w x 15.5″h x 6.75″d (each box – 2 boxes total)

Includes:

• 2 Single-Sided SEG Dye Sub Backlit Fabric Graphics
• 2 Horizontal Profile (L)
• 2 Vertical Profile (Top)
• 2 Vertical Profiles (Bottom)
• 2 Horizontal Profiles (M)
• 2 Horizontal Profiles (R)
• 6 Mid Pole
• 1 S cable
• 1 Cross Mid Pole
• 2 Feet
• 1 LED Connector
• 1 S cable
• 2 Transformer
• 2 Travel Bag

Setup From the Ground Up — Four Stages to a Lit Display

Getting this display out of its case and into show-ready condition is a process most first-timers complete without assistance. Here is how the stages flow in practice:

1. Unpack and sort the extrusions. Every aluminum channel is labeled and grouped by length. Lay them out on the floor before connecting anything so the layout is clear before assembly begins.
2. Snap the frame together. Corner connectors click into the channels by hand. No Allen keys, no rubber mallets. The modular architecture means the frame self-squares as you work.
3. Route the LED power cable. The cable tucks inside the extrusion channel and plugs into a single junction point. Thread it during assembly rather than after — it is faster and keeps the cable concealed.
4. Load the SEG graphics. Starting at one corner, press the silicone bead into the perimeter groove and work around the frame. The fabric tensioning system pulls the graphic flat automatically.
5. Place and power on. Set the frame in position, connect to a standard outlet, and the LEDs bring both faces to full brightness immediately — no warm-up period.

Fabric, Frame, and Finish — What a Buyer Notices Up Close

The aluminum extrusion profile on this 10ft x 7.5ft double sided modular seg lightbox is a double-sided channel, meaning both faces share a single structural core. That keeps the overall frame depth narrow — under four inches — which matters when booth space is measured in inches as much as feet.

The printed fabric itself uses dye-sublimation at high resolution, so gradients, photography, and fine logotype all reproduce cleanly. The polyester weave is taut enough to eliminate sag but flexible enough to reload in under ten minutes when you swap to a new campaign graphic. Because the frame hardware and graphic system separate completely, reordering a fresh print for the next show costs a fraction of replacing the entire kit.

For buyers who want deeper guidance before committing to this size and configuration, the single vs double sided backlit display breakdown in our pillar guide walks through the trade-offs in plain language.

The sego backlit display frame is anodized aluminum, which resists scratching across repeated pack-and-unpack cycles. The carry case wheels and telescoping handle make airport check-in practical, and the total pack weight puts this well under most airline cargo limits for two checked bags.

Pairing This Configuration With Other Backlit Formats

A 10ft x 7.5ft double sided modular seg lightbox works well as a booth’s primary backdrop, but many exhibitors pair it with a smaller accent piece to fill corners or define a product demo zone. The sego modular light box system is designed explicitly for this kind of modular expansion — add a 2.5ft or 5ft panel to one side and the same extrusion hardware connects without adapters.

If your event calendar includes smaller shows where the full 10ft frame is more than the space allows, a backlit pop up display from the pop-up backlit line packs into a single rolling case and sets up in even less time. It is a practical secondary unit to have in the inventory, particularly for regional events that do not justify shipping the larger kit.

For exhibitors who prefer a fixed-frame look without modular expansion, the lumiere backlit display offers a streamlined alternative — a non-modular SEG frame built around similar dye-sublimation fabric and integrated LED output. It sits in the same backlit displays category and is worth reviewing if your booth calls for a cleaner, single-piece silhouette rather than an expandable system.

Get This Configuration Into Your Next Booth Plan

The 10ft x 7.5ft double sided modular seg lightbox ships with frame hardware, LED components, carry case, and your custom-printed SEG graphic on both faces. Lead times are competitive, and the production team can confirm turnaround against your specific event date before you commit.

Place your order through the product page, upload your artwork files (or request a free pre-production template), and the display arrives ready to perform. If you have questions about file specs, configuration options, or combining this unit with other pieces in the sego lightbox for trade show lineup, contact Showfire Displays directly — the team responds quickly and speaks exhibitor scheduling language. Order now and arrive at your next show with both faces lit.