2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided

Lumiere Light Wall No Lights (Frame Only Collapsed)

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 3

Lumiere Light Wall No Lights (Frame Only Tabs)

Lumiere Light Wall No Lights (Frame Only Front)

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 7

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 8

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 9

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 10

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 11

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 12

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 13

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided - Image 14

2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit – Double-Sided

Name: 2.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit - Double-Sided
Brand: 2.5ft x 7.5ft SEG Backlit Display | Lumiere Light Box
SKU: WSLLW1X3G2
Availability: InStock

$1,195.00

Production Time: 2 Business Days After Proof Approval

The Lumiere Light Wall in a 2.5ft x 7.5ft double sided seg backlit display configuration delivers full-face LED illumination through a tension-fabric graphic on both sides of a sleek, tool-free aluminum frame. At just 30 inches wide and 90 inches tall, this format is purpose-built for narrow footprints where every inch of floor space has a dollar value attached to it. The 2.5ft x 7.5ft lumiere backlit display makes that space work twice as hard by projecting brand messaging in two directions simultaneously — ideal for aisle-facing placements, entrance columns, or any position where foot traffic approaches from multiple angles. A custom-printed silicone edge garment (SEG) fabric graphic locks into the frame channel under even tension, eliminating ripple and ensuring your artwork reads cleanly from across a crowded hall. LED strips run the full interior height of the frame, producing consistent light temperature and even brightness from top to bottom with no hot spots or dark zones at the corners. The hardware packs into a carry case and assembles without tools in under 15 minutes, so setup stress is minimal even on early show mornings. If you want a detailed breakdown of how this technology compares to non-illuminated and alternative backlit formats, the SEG backlit display guide covers the full decision framework.

SKU: WSLLW1X3G2 Category: 2.5ft x 7.5ft SEG Backlit Display | Lumiere Light Box

Lumiere Light Wall 2.5ft x 7.5ft Graphic Package Includes:

• (1) Pop Up Frame

• (4) 1-Section Channel Bars

• (4) 3-Section Channel Bars

• (1) Channel Bar Bag

• (1) Carry Bag (for frame)

• (3) Ladder Light Sets

• (1) Travel Bag for Ladder Lights

• (1) Transformer

• (1) Transformer Power Cord

• (2) 2.5ft x 7.5ft backlit graphics

• (2) End Caps (either block out or printed)

Display Dimensions: 30.5 ” W x 88.75″ H x 14.5″ D
Graphic Dimensions: 30.5″ W x 88″ H
Frame Shipping Weight: 26 lbs (including graphics)
Frame Shipping Dimensions: 34″ L x 14″ W x 9″ H
Ladder Light Shipping Weight: 8 lbs
Ladder Light Shipping Dims: 7.5” L x 5.5” W x 30.5” H

Why a 30-Inch-Wide Display Outperforms a Standard Panel in Narrow Booth Positions

Narrow booth positions are among the most underused assets on a trade show floor. A standard 10-foot back wall behind a 10-foot booth looks fine, but it does nothing for the aisle walker who passes at 90 degrees to your table. The typical fix — adding a freestanding banner stand — gets you one-sided coverage and a lightweight graphic that sags under overhead HVAC airflow.

The problem compounds at multi-day events: banner stand graphics fade faster under heat, frames tip when brushed by passing carts, and the single-sided format simply abandons half your visual real estate. Brands that invest in booth real estate but not in aisle-facing illumination end up paying for square footage that only speaks to attendees who are already in front of them.

How the Lumiere Frame Solves It — Feature by Feature

The 2.5ft x 7.5ft double sided seg backlit display is built around an extruded aluminum frame engineered for the specific load requirements of a dual-face LED configuration. Here is what the specification translates to in practice:

Specification	Detail
Display dimensions	2.5ft wide x 7.5ft tall (30″ x 90″)
Frame material	Extruded aluminum, tool-free snap assembly
Illumination	Internal LED strips, full-height coverage
Graphic type	SEG silicone edge garment, stretch fabric
Display faces	Double sided (front and rear graphic)
Power	Standard 110V outlet, low-draw LED
Setup time	Under 15 minutes
Graphic changes	Graphic swaps without frame disassembly

The SEG channel grips the silicone bead sewn into the graphic perimeter and holds it under calibrated tension — no adhesives, no Velcro, no warping after a few shows. LED temperature is tuned to complement print inks rather than wash them out, so photography taken at the booth still captures your brand colors accurately. Because the graphics swap independently of the hardware, you can carry two sets of fabric prints and change messaging between show days without packing out the frame.

The custom 2.5ft x 7.5ft lumiere backlit display option means your artwork is dye-sublimation printed at full resolution onto the stretch fabric — not applied as vinyl over a plain panel. That distinction matters most at close viewing distances of three to five feet, where texture and clarity separate a professional installation from a budget stand.

Graphic Replacement and Campaign Flexibility

You do not need to replace the entire unit when a campaign ends. Order a new fabric graphic, pull the old SEG bead from the channel, and press the new one in — the frame stays on the floor and the swap takes roughly five minutes.

Weight, Pack, and Transport

The full kit — frame sections, LED assembly, and carry case — ships and transports at a weight that a single person can manage. No freight-only dimensions, no pallet requirements for this size.

Sizing This Display Inside a Broader Booth Kit

This narrow column format pairs naturally with wider backlit walls. If your layout also includes a 10-foot back wall, the 10ft x 7.5ft lumiere backlit display carries the same frame system and SEG graphic format, so both displays use a consistent visual system and share graphic production workflows. For booths that need a mid-size option between the 2.5ft column and the full 10ft wall, the 5ft x 7.5ft lumiere backlit display fills that gap without requiring a separate hardware ecosystem.

Fitting This Configuration Into Your Existing Display Plan

The 2.5ft x 7.5ft lumiere backlit display price reflects a format that is engineered for exhibitors who need durable, rebrandable hardware rather than a single-event throwaway. The frame is designed for repeated setup and teardown over multiple show cycles, and the LED assembly carries the same longevity expectations as the wider Lumiere family.

If you are comparing this unit to other configurations in the lineup, the full lumiere backlit display category page presents every available size alongside configuration notes, which makes it straightforward to match a frame to your specific booth plan. The 2.5ft x 7.5ft lumiere backlit with led configuration also meets the power specs of most convention centers without requiring a dedicated high-amperage drop — a standard 110V connection is all this display needs.

Put Your Next Booth Campaign Into Motion

The 2.5ft x 7.5ft double sided seg backlit display is available now with custom graphic printing included. Specify your artwork, confirm your dimensions, and Showfire Displays handles production and fulfillment. Visit the 2.5ft x 7.5ft SEG backlit display page to review options, get current pricing, and place your order — your next show schedule does not wait, and neither should your display kit.