10 ft x 10 ft Lumiere Backlit Light Wall Kit – Double-Sided

Lumiere Light Wall 10 ft. x 10 ft. Frontlit Graphic Package Includes:

• (1) Pop Up Frame
• (8) 4-Section Channel Bars
• (4) End Cap Channel Bars
• (1) Channel Bar Bag
• (1) Carry Bag (for frame)
• (16) Ladder Light Sets
• (4) Travel Bag for Ladder Lights
• (4) Transformers
• (4) Transformer Power Cord
• (2) Large Backlit Graphics
• (2) End Caps (either block out or printed)

Display Dimensions: 117.75″ W x 117.75″ H x 14.5″ D
Graphic Dimensions: 117.5″ W x 117.75″ H
Shipping Weight: 44 lbs (with graphics)
Shipping Dimensions: 34″ L x 14″ W x 13″ H
Ladder Lights Shipping Weight: 36 lbs
Ladder Lights Shipping Dimensions: 6.25″L x 7.75″W x 30.75″H

Who This Configuration Is Built For

A double-sided format serves a specific set of situations that a single-sided wall simply cannot handle. If your booth sits in an island position — open on multiple sides — you have traffic flowing past both faces of the display, and leaving one side unlit means losing half of that audience. Brands that book end-cap booths at trade shows face the same challenge: the back of the display is exposed to the adjacent aisle, and a blank panel communicates nothing. Retailers placing this frame as a freestanding room divider or feature wall gain a backlit graphic that reads clearly from both the sales floor and the stock area behind it, turning a structural element into a dual-purpose branding asset.

This format also suits exhibitors who rotate between single-booth and island configurations across different shows. Rather than buying two separate displays, one double-sided frame handles both scenarios with a single purchase.

Features That Define the 10ft x 10ft Double Sided SEG Backlit Display

• Dual-face LED illumination: Separate LED arrays light both graphic faces evenly, eliminating hot spots and dark corners across the full 10ft x 10ft surface.
• Tool-free aluminum extrusion frame: Sectional frame pieces connect by hand — no wrenches, no screwdrivers, no missing hardware mid-setup.
• SEG silicone-edge graphic system: The fabric print is edged with a thin silicone gasket that tucks into the frame channel, holding the image drum-tight and flat.
• Dye-sublimation fabric print: Colors are pressed permanently into the fiber, not printed on top, so the image resists fading under prolonged LED exposure and repeated handling.
• Graphic-only replacement available: When a campaign ends, you can order a new SEG fabric skin without replacing the frame, reducing long-term display costs significantly.

Assembly, Graphic Care, and Getting the Most Out of This Frame

Setup on a 10ft x 10ft double sided seg backlit display follows a logical sequence: connect the aluminum frame sections into the outer rectangle, run the internal cross-members to support the LED strips, feed the power cables through the frame, and then tuck the SEG graphic into the channel starting at one corner and working around the perimeter. Two people working together can typically complete the full process in under 30 minutes the first time; repeat setups are faster. The sectional frame packs into a wheeled carry case, and the fabric graphic folds compactly without creasing the image permanently.

To keep the fabric graphic in good condition between shows, remove it from the frame after each event rather than leaving it stretched over the LEDs for extended periods. If the print picks up a surface crease during transit, a handheld garment steamer will relax the fibers and restore a flat appearance within minutes — do not use a dry iron directly on the fabric. The aluminum frame itself requires no maintenance beyond wiping the extrusion channels clean before re-inserting a new graphic, which prevents grit from scratching the silicone edge.

When a campaign changes, replacing only the SEG graphic — rather than the entire kit — keeps the refresh cost low. This is one of the main structural advantages the Lumiere system holds over rigid-panel lightboxes, and it is covered in more depth in the backlit display buying guide if you want a full comparison before committing to a format.

Choosing the Right Size for Your Situation

The 10ft x 10ft square format is one of the most requested sizes in the Lumiere line because it maps directly onto the standard trade show booth module. If your allocation is a rectangular 10ft x 7.5ft space instead, the 10ft x 7.5ft lumiere backlit display is the closest sibling size and carries the same double-sided graphic option.

For brands running larger island configurations or inline displays that span two booth modules, the 20ft x 10ft lumiere backlit display extends the same frame-and-SEG system across a wider footprint without changing the assembly logic. Choosing between these sizes is easier when you map your booth contract dimensions against each frame’s installed footprint before ordering.

The full lumiere backlit display collection spans additional sizes and single-sided variants if neither the square nor the extended format fits your floor plan. For a broader look at how SEG fabric formats compare against other backlit technologies, the types of backlit trade show displays breakdown is a useful starting point.

If you want a custom 10ft x 10ft lumiere backlit display — different graphic count, specific color profile, or branded packaging — the team at Showfire can work through the details with you directly.

Pricing, Graphic Options, and Getting Your Order Started

The 10ft x 10ft lumiere backlit display price includes the frame, LED lighting system, and your custom double-sided SEG graphic printed to the specifications you provide. This 10×10 backlit booth configuration is priced as a complete display-ready package, not as a frame you then source graphics for separately. If you have an existing SEG graphic from a prior campaign that was produced at this size, confirm the silicone-edge specification matches before ordering a frame-only option.

To get your campaign moving, add the display to your cart, upload your artwork during checkout, and the Showfire production team handles the rest. Questions about file setup, lead times, or bulk show schedules are best answered before you place the order — contact details are on the product page.

Order your 10ft x 10ft double sided seg backlit display today and arrive at your next show with a display that works for you from every angle.