Triple Panel Portable Light Box Kit – Double-Sided

Includes:

• (3) Box Case
• (3) Bottom Frame Piece (Frame Thickness: 80mm)
• (12) Side Frame Pieces (Frame Thickness: 80mm)
• (3) Top Frame Piece (Frame Thickness: 80mm)
• (6) LED Wire Connector
• (3) Transformer Power Cord
• (3) Support Pole
• (18) Connection Clips

Features:

• Display Size: 39 3/8″ W x 79 1/8″ H x 15″ D
• Template Size: 39″W x 79″H
• Material: Stretch Fabric
• Boxes: 3 boxes
• Shipping Dimensions: 45″L x 6″W x 13″H per box
• Shipping Weight: 20 lbs per box

A Full Show Day With the Triple Panel Display

The morning of the show, your team arrives at an empty 10-by-10 or larger inline space. Two people pull the carry bags off the cart, unzip the aluminum frame pieces, and begin clicking sections together. The Portable Light Box frame system uses a snap-lock extrusion that doesn’t require a mallet or a hex wrench — segments seat firmly with hand pressure. Within roughly 30 minutes, all three illuminated panels stand in line, the SEG fabric graphics are tucked in, and the power cables are routed through the frame’s internal channel to a single power strip behind the display.

When the show floor lights come on, the LED array inside each panel floods the fabric print with consistent, even backlight from edge to edge — no hot spots, no dark corners. Passersby notice the illuminated surface from a distance before they can read a single word of copy, which means your branding registers even during busy corridor moments when visitors are glancing, not stopping. By midday the display has held its position, the fabric hasn’t sagged or shifted, and no one from your team has touched it since setup.

At breakdown, the fabric unzips from the frame, folds flat, and the aluminum extrusions disassemble in reverse order. Everything fits back into the same bags it arrived in. For exhibitors who do six or eight shows a year, that repeatability is where the value of a triple panel portable light box display really accumulates — fast load-in, fast load-out, season after season.

What Comes in the Box

• Triple-panel SEG aluminum light box frame: Three connected illuminated panels, each with an internal LED strip array and a silicone-edge channel around the perimeter
• Double-sided SEG fabric graphic set: Full-color dye-sublimation prints for both the front and back face of all three panels, produced to your submitted artwork
• Internal cable management: Power cables route through the hollow frame extrusion, keeping cords hidden and the presentation clean
• Carry bags: Padded bags sized to each component for transport and storage between events
• LED power supply: Pre-wired and matched to the frame’s LED strip, ready to connect to a standard 110V outlet

Choosing the Right Configuration for Your Booth

The triple-panel format suits booths that need backlit coverage across a wide span — roughly the full back wall of a 10-foot inline or a prominent visual anchor in a larger island. If your floor space is tighter, the value light box display line includes single and double panel variants that share the same frame system and graphic process, so upgrading later doesn’t mean starting over from scratch.

For buyers who want a slimmer profile — fewer panels but a taller graphic height — the slim led light box variants within the Portable Light Box line are sized to the same extrusion system. And if your application calls for a larger, permanently styled freestanding structure, the freestanding light box Igniter series steps up to full-perimeter frames with a floor-standing base.

Double-sided illumination is what separates this package from a single-face budget light box. If your space is an end cap or an island, single-sided coverage leaves an unlit back wall facing half your audience. This configuration lights both sides with the same LED density, so the display performs equally well from either direction.

Before you finalize artwork, review the backlit display buying guide on Showfire’s site — it covers resolution requirements, bleed specifications, and color-profile recommendations that directly affect how your fabric print looks under LED illumination. If you’re still weighing your format options across the broader backlit displays catalog, that same guide walks through the trade-offs between freestanding, pop-up, and portable panel systems.

One alternative worth considering: the backlit pop up display format offers a curved, continuous graphic surface on a tension-spring frame — useful if you want a seamless arc rather than a flat panel wall.

Order This Display and Get Your Campaign Moving

The Triple Panel Portable Light Box Double-Sided Graphic Package is a straightforward, well-priced triple panel portable light box display built for exhibitors who need reliable illuminated coverage show after show without overcomplicating setup or storage. Submit your artwork, place your order, and your display ships complete — frame, graphics, and carry bags included. Contact Showfire Displays today to get your configuration confirmed and your graphic files into production.