One Choice Light Box Graphic Package Frame

40 in. x 79 in. Portable Light Box Kit – Double-Sided

Name: 40 in. x 79 in. Portable Light Box Kit - Double-Sided
Brand: Portable Light Box Displays for Trade Shows & Events
SKU: WSOC-LIGHTBOXG2
Availability: InStock

$590.00

Production Time: 2 Business Days After Proof Approval

The 40 x 79 double sided portable light box from Showfire’s Portable Light Box line gives exhibitors a full-height, illuminated back panel without the bulk or budget strain that larger freestanding frames demand. At roughly 40″ wide and 79″ tall, it fills a standard trade show booth bay with clean, edge-lit LED illumination on both faces simultaneously — so a single display works the crowd from two directions without doubling your hardware cost. The slim led light box profile packs down into a carry bag you can check as oversized luggage or stow in a cargo van alongside your other show materials. Graphics are produced on dye-sublimated stretch fabric that locks into a silicone edge gasket (SEG), yielding wrinkle-free, vivid color from the moment you pop the last corner into place. This package includes the aluminum frame, LED lighting module, carry case, and a double-sided custom graphic set — everything you need, ordered as one SKU from the portable light box display collection. It is a strong fit for smaller booths, retail floor installations, event activations, and any venue where you need two-sided visibility in a tight footprint. If you are shopping for a value light box display that does not compromise on visual quality, this configuration is worth a close look.

SKU: WSOC-LIGHTBOXG2 Category: Portable Light Box Displays for Trade Shows & Events

Includes:

(1) Box Case
(1) Bottom Frame Piece
(4) Side Frame Pieces
(1) Top Frame Piece
(2) LED Wire Connector
(1) Transformer Power Cord
(1) Support Pole
(2) Custom Printed Graphics (Double-Sided)

Features:

Display Size: 39 3/8″ W x 79 1/8″ H x 15″ D
Template Size: 39″W x 79″H
Material: Stretch Fabric
Shipping Dimensions: 45″L x 6″W x 13″H
Shipping Weight: 20 lbs

Getting From the Carry Case to a Lit Display

Setup is deliberately straightforward, and most exhibitors finish it without reading the manual past the first page.

Unpack the frame sections. Aluminum extrusions and connectors come bundled in the carry case. Lay them out in order before you start connecting anything — it saves backtracking.
Assemble the frame. Push-lock connectors click the extrusions into a rigid rectangle. The frame stands roughly 79″ tall when complete, so you will want a small step stool handy for the top corners.
Install the LED module. The lighting strip mounts inside the frame channel and connects with a single low-voltage cable. No tools required.
Stretch the front graphic. Tuck the silicone bead around the perimeter of the frame, starting at the midpoints of each side and working toward the corners. The fabric self-tensions as you go.
Flip and repeat for the rear graphic. Because this is a 40 x 79 double sided portable light box, both faces take a separate SEG graphic panel — the process is identical on the back.
Plug in and step back. A standard 110V outlet powers the LEDs. Total setup typically runs eight to twelve minutes once you have done it once.

What the Graphic Surface Delivers When You Get Close

Fabric quality is where slim light box displays often get separated from each other, and this package does not cut corners on the print side. Graphics are produced on a tightly woven polyester fabric using a dye-sublimation process that pushes pigment into the fiber itself rather than sitting on top as an ink layer. The result resists cracking, peeling, and the color fade that plagues cheaper vinyl alternatives after a few show cycles.

Specification	Detail
Display size	40″ x 79″ per face
Frame material	Aluminum extrusion
Graphic method	Dye-sublimation on stretch fabric
Edge attachment	Silicone edge gasket (SEG)
Illumination	Internal LED strip, 110V
Sides illuminated	2 (double-sided)
Carry case included	Yes

Color accuracy matters most in high-contrast booth environments, and the edge-lit LED array distributes light evenly across the fabric face — no hot spots near the strip, no dim corners at the perimeter. If you want context on how this technology fits into the broader display category before committing, the SEG backlit display guide covers illumination methods, fabric grades, and single-vs-double-sided trade-offs in depth.

Because the graphic attaches and detaches without heat guns or adhesives, you can swap artwork between shows in under five minutes. A second graphic set ordered now saves you from a rushed reprint before your next event.

Pairing This Display With Other Formats in Your Booth Kit

A 40″ wide panel works well as a solo feature in a 10 x 10 booth, but it also layers into larger configurations without visual conflict. If your show schedule calls for a full back wall with center-stage presence, the freestanding light box Igniter series scales up to 20ft-wide configurations while sharing the same dye-sub graphic language — so branded colors and typography stay consistent across sizes.

For exhibitors who prefer a collapsible spine system over a modular aluminum frame, a backlit pop up display offers a similar illuminated surface area with a slightly different assembly method. Both formats complement a Portable Light Box panel when you need to fill more linear feet without committing to a custom island build.

It is also worth checking the full backlit displays catalog if you are building a multi-piece kit — mixing slim panels, pop-up backs, and freestanding towers is a common strategy for exhibitors who rotate across multiple show sizes throughout the year.

Ordering Your 40 x 79 Double Sided Portable Light Box

This package is priced as a budget light box option without stripping out the features that make repeated show use practical — dual-sided illumination, a quality carry case, and dye-sub graphics are all included at one price. If you are comparing formats and want guidance on what separates this mid range light box from higher-investment configurations, the how to choose a backlit trade show display pillar guide walks through the decision criteria clearly.

Ready to put this display to work at your next show? Configure your 40 x 79 double sided portable light box now, upload your artwork files during checkout, and the team at Showfire will handle production and ship it directly to your booth address or warehouse. Questions before you order? Use the on-page chat or contact form — the Showfire team responds fast.