20 ft Square Hanging Banner Kit – 60 in. Drop

This particular model is 20ft in diameter and 60in tall.
Graphic is included in price.

(1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
(1) Full color zippered tension fabric graphic print (Outside print)
Nylon travel bag
Hanging Cable
Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener

Graphic Material
Fabric

Graphic Finishing
Hem with zipper

Construction
All aluminum frame construction

Warranty
1 Year on Graphic
1 Year on Frame

What the 20 ft x 60 in Square Hanging Banner Kit Delivers

The frame measures 20′ across each side, creating a square footprint that reads as a bold geometric overhead shape from any direction on the show floor. Aluminum tubing connects through molded ABS corner joints, and the assembled frame is designed to accept the fabric graphic as a fitted sleeve — no clips, no grommets, no fumbling with attachment hardware during setup. The 60″ drop means the bottom edge of the graphic hangs 5′ below the frame’s top rigging point, giving the sign a substantial vertical presence without eating into booth clearance at most venues that allow rigging above 18′.

The fabric itself is a tear-resistant woven polyester that stretches evenly across the frame, eliminating the sag and wrinkle problems common with vinyl banners. Dye-sublimation printing goes directly into the fabric fibers rather than sitting on top, so the colors do not crack, peel, or fade after repeated handling. For exhibitors who need messaging on every side of the booth, the double sided 20ft square hanging banner configuration prints distinct artwork on both the interior and exterior faces — a meaningful advantage when attendees approach from multiple directions.

The complete kit packs into a single carry bag with shoulder straps, and the fabric panel is separately stuff-sackable for wrinkle recovery. Refer to the trade show hanging banner guide for detailed guidance on venue rigging coordination, clearance requirements, and how to submit rigging drawings when your venue requests them.

How a 60-Inch Drop Performs Inside a Large Island Booth

Picture a 20 x 20 island booth at a major industry expo. The aisle is crowded by mid-morning, and a dozen competitors have similar-sized floor footprints. The overhead sign is the one element that projects above banner stands, counters, and pedestrian traffic — but a shallow drop risks shrinking the graphic to the point where branding details are illegible from across the hall. At 60″, the graphic face has enough vertical real estate to stack a logo on top, a product category line in the middle, and a booth number or call to action near the bottom, all without the type becoming uncomfortably small.

A custom 20ft square hanging banner at this drop profile also benefits from the geometry of how attendees scan overhead: the eye naturally lands slightly below the rigging point, which puts the center of a 60″ panel right in the primary viewing zone. When the rigging point is at 20′ and the sign drops 5′, the visual center sits at roughly 17.5′ — well within readable range from 60 feet away if type is set at an appropriate size for the viewing distance.

For exhibitors who also run smaller booths at regional events, the square hanging banner kit page covers the full range of frame sizes and drop depths available across the square format, making it straightforward to spec a second sign for a 10 x 10 inline without starting over from scratch.

Buyer Questions Worth Answering Before You Order

Does the 60-Inch Drop Work With Standard Venue Rigging Clearances?

Most convention centers that permit overhead rigging require a minimum clearance of 8′ to 9′ from the finished floor to the bottom of any suspended sign. With a 20′ rigging point and a 60″ drop, the bottom of this sign sits at roughly 15′ — comfortably above that threshold at standard venues. Always confirm your specific venue’s rigging rules and submit the sign’s dimensions to the show decorator before finalizing the order. The exhibition hanging banner pillar guide includes a rigging checklist you can work through with your show coordinator.

Can the Graphic Be Replaced Without Buying a New Frame?

Yes. The aluminum frame is a long-term asset. When your creative refreshes between shows, you order a new fabric graphic sleeve — the frame, connectors, and rigging hardware carry forward. This is one of the practical reasons exhibitors investing at the 20′ scale choose the fabric-and-frame system over rigid signage: the per-show cost drops sharply after the initial kit purchase.

How Does This Configuration Compare to Other Square Sizes?

The 20′ frame is the largest in the square format line. Exhibitors with smaller booths often find the 8ft square ceiling banner better proportioned for a 10 x 10 or 10 x 20 space, while very small activations sometimes use the 5ft square hanging banner for tabletop or small-footprint events. The 20′ configuration is intended for large island exhibits where the ceiling sign needs to match the physical scale of the booth.

Configure Your 20 ft x 60 in Square Hanging Banner and Order

Upload your artwork, confirm single or double-sided printing, and place your order directly through the buy 20ft square hanging banner product page. The 20ft square hanging banner kit ships as a complete package — every component needed to rig the sign is included. If you have artwork questions or need guidance on file setup, the Showfire Displays team is ready to help before you submit. Order now and have this sign ready for your next major show.