This particular model is 12ft in diameter and 48 inches tall.
Graphic is included in price.
• (1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
• (1) Full color zippered tension fabric graphic print
• Nylon travel bag
• Hanging Cable
• Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener
Graphic Material
Fabric
Graphic Finishing
Hem with zipper
Construction
All aluminum frame construction
Warranty
1 Year on Graphic
1 Year on Frame
Getting From the Shipping Box to the Ceiling
Setting up a 12 ft x 48 in circle hanging banner takes far less effort than most exhibitors expect. Here is how the process flows from unboxing to first hang:
- Unpack and identify components. Open the carry bag and lay out the circular frame segments, center hub, hanging cable, swivel mount, and the printed fabric graphic. Every piece should be labeled or obvious by shape.
- Assemble the circular frame. Click the curved frame segments together into a complete 12-foot circle. The segments interlock without tools — firm, audible snaps confirm each joint is seated.
- Attach the center hub and cable. Thread the hanging cable through the center hub and secure the swivel mount to the top. The swivel allows the sign to rotate freely overhead rather than spinning under air-conditioning drafts.
- Slip on the fabric graphic. The stretch-fabric graphic slides over the frame from one side, then the opposing side, distributing tension evenly so the face stays wrinkle-free without clipping or stapling.
- Hand off to rigging and raise. Attach the rigging cable to the venue’s motor or beam, confirm the sign is level, and raise it to the desired height — in this case, the 48-inch drop puts the bottom edge approximately at eye level from a distance, maximizing read-from-aisle impact.
- Final alignment check. Once the banner is at height, walk the perimeter of your booth to verify the graphic faces the primary traffic aisle and the swivel is centered.
Print Quality, Fabric Feel, and Finish Details Worth Knowing
Buyers who handle this display up close consistently notice a few things about the build quality. The fabric is a knit polyester engineered for dye-sublimation printing, which means the ink bonds inside the fiber rather than sitting on top — no peeling, cracking, or fading after multiple events. Colors print at full bleed edge to edge, so there are no white borders interrupting your design. The 48-inch drop gives the graphic panel a tall, rectangular band around the circle’s circumference — enough vertical real estate for a prominent logo, a short tagline, and a supporting visual without things feeling cramped.
| Feature | Detail |
|---|---|
| Frame diameter | 12 ft (144″) |
| Graphic drop | 48 in |
| Print method | Dye-sublimation on stretch polyester |
| Frame material | Lightweight aluminum segments |
| Hanging hardware | Swivel mount + cable included |
| Sides | Outside graphic (single-sided) |
The frame itself is aluminum, which keeps the fully assembled sign light enough for standard trade-show rigging without requiring a heavy-duty motor. After the show, the fabric unlaces from the frame in minutes, and both pack separately into the included carry bag for transport or storage.
Pairing This Banner With the Right Size for Your Setup
Overhead display programs often use more than one hanging sign to guide traffic across a large floor plan, and the 12ft circle hanging banner with hardware from this kit pairs well with other sizes in the same family. If a secondary position in your booth needs something more compact — say, above a product demo station — the 8ft circle ceiling banner covers that scenario at a proportional scale without visually competing with the hero sign overhead.
For a satellite location or a smaller venue altogether, the 5ft circle hanging banner brings the same fabric and hardware quality to spaces where a 12-foot diameter would simply be too large. Mixing diameters at a single event is a common strategy — the largest sign anchors the main booth while smaller circles mark breakout areas, entrances, or product zones. The complete range of shapes and sizes, including rectangles, ovals, and triangles, is documented in our circle hanging banner with hardware collection, where you can filter by diameter and drop to build the right combination.
For broader guidance on rigging clearances, motor requirements, and venue rules across different show types, the trade show hanging banner guide covers everything you need to know before submitting a rigging order to your show decorator.
Configure Your 12 ft x 48 in Circle Hanging Banner and Order
Whether this is your first overhead display or you are adding to an existing kit, the 12 ft x 48 in circle hanging banner gives a 12-foot footprint overhead without the complexity of a custom fabricated sign. Upload your artwork, confirm the 48-inch drop fits your venue’s clearance, and Showfire handles the rest — print, hardware, and a carry bag included. The custom 12ft circle hanging banner ships ready to hang, so your crew can focus on booth setup rather than chasing down parts. Order your double sided 12ft circle hanging banner — or the standard outside-graphic version on this page — and get your overhead display locked in before your next show date.









