This particular model is 12ft in diameter and 36 inches tall.
Graphic is included in price.
• (1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
• (1) Full color zippered tension fabric graphic print
• Nylon travel bag
• Hanging Cable
• Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener
Graphic Material
Fabric
Graphic Finishing
Hem with zipper
Construction
All aluminum frame construction
Warranty
1 Year on Graphic
1 Year on Frame
Who Benefits Most From the 36-Inch Drop at 12 Feet
Exhibitors working a 20 x 20 or 20 x 30 booth space will find this configuration proportionally well matched to their footprint. A 12-foot diameter fills the overhead zone generously without overwhelming the sightlines below, and the 36-inch drop keeps the lower edge of the banner well above attendee eye level — making it readable from across an aisle while still allowing booth staff to move freely underneath. Brands that rotate through multiple shows per season also get consistent value from this kit: the hardware breaks down compactly, the fabric folds flat, and the bag makes re-use straightforward rather than a logistical headache.
Retailers and brand activations at indoor sporting events, conventions, and corporate expos are a strong secondary fit. These environments typically have fixed rigging points at ceiling height, and a 36-inch drop allows the graphic’s full width to register before venue lighting or architectural elements interrupt the sightline. If your venue has unusually low clearance or you only need a compact identifier overhead, our 5ft circle hanging banner is worth reviewing as an alternative starting point.
Spec Snapshot for the 12 ft x 36 in Circle Hanging Banner
| Feature | Detail |
|---|---|
| Diameter | 12 ft (144 in) |
| Drop / Height | 36 in |
| Print Method | Dye-sublimation on polyester |
| Frame Material | Lightweight aluminum tube sections |
| Graphic Sides | Single or double sided |
| Hardware Included | Full rigging hardware + carry bag |
What Sets This Kit Apart
- Dye-sublimation color — pigment fused into fabric threads, not printed on top, so there is no cracking or peeling through repeated installs
- Modular aluminum frame — lightweight sections snap together without tools, reducing setup time and the chance of on-site errors
- Double-sided print option — artwork on both faces so the graphic reads from every angle; ideal for center-aisle placement
- Carry bag included — frame tubes and folded fabric store together in one bag, keeping components accounted for between shows
- Custom artwork ready — upload your own design file; the graphic is produced to the exact dimensions of this configuration
For a broader look at how drop heights and diameters interact across the full product family, the 12ft circle hanging banner hub page walks through every available configuration side by side.
Setup, Care, and Getting Multiple Seasons From This Kit
Assembly follows a predictable sequence: connect the aluminum frame sections into the circular ring, attach the fabric graphic by feeding it onto the frame, and then connect the rigging cable to the hanging point at the ceiling. Most teams complete the process in under 30 minutes without specialized tools. Lay the sections out on a clean surface before you begin so you can confirm all parts are present — this is faster than troubleshooting mid-install.
After each event, hand-wash the polyester fabric in cold water with mild detergent and allow it to air dry completely before folding. Avoid machine drying, which can distort the hem and affect how cleanly the graphic seats on the frame at your next show. Store frame sections horizontally in the carry bag to prevent any bending that can accumulate when tubes are stacked vertically under weight.
If you are planning a display program that uses multiple sizes simultaneously — for example, a 12-foot unit over the main booth and a smaller sign over a demo station — the 8ft circle hanging banner is a natural companion for secondary overhead positions. Mixing diameters creates visual hierarchy that guides attendees through a large exhibit space intuitively.
The circular hanging sign collection includes every diameter and drop combination Showfire offers, so you can compare options across the full range in one place.
For guidance on rigging logistics, venue weight limits, and how to coordinate overhead signage with the rest of your display program, the trade show hanging banner guide covers these decisions in practical detail and is worth bookmarking before your next show.
The custom 12ft circle hanging banner and the double sided 12ft circle hanging banner options are both configurable on the product page — select your graphic preference, upload your artwork, and confirm your order in a few steps. The 12ft circle hanging sign format is one of the most requested overhead shapes in the Showfire catalog because the geometry reads clearly at distance and prints reproduce without the geometric distortion that affects rectangular formats.
Ready to Configure Your 12 ft x 36 in Circle Hanging Banner?
Head to the product page, choose your graphic option, and upload your artwork file — the Showfire team handles the rest and ships your completed kit ready to hang. If you have artwork questions or need a spec sheet for your exhibit house, contact Showfire directly before placing your order.









