33.5 in. Silverwing Single-Sided Retractable Banner Stand – 69″H Fabric Graphic Package

Construction:
The Silverwing is finished in anodized aluminum and heavy duty plastic end plates. It is quick and simple to use and holds 33.5″w x 69″ to 92″H banners (with a 6″ bottom bleed).

Set up: Banner attaches by tape on the bottom and by Clamp bar on the top.

Graphic Material: Fabric (Recommended)

Base Size: 35″W x 3″H x 8.5″D

Includes:

• Stand
• Top cross bar
• Adjustable support pole
• Silverwing travel bag (11.5″ x 40″ x4″)

Printed Banner is not changable.

What the 33.5 x 69 Single Sided Fabric Retractable Banner Stand Package Includes

The hardware base is a silver-finish aluminum cassette with a spring-loaded retraction system tested for thousands of pull cycles. A two-section telescoping upright pole adjusts within the supported height range and connects to a top-bar clamp that holds the fabric panel edge-to-edge without visible hardware breaks in the graphic field. The padded nylon carrying bag loops over a shoulder and keeps the cassette, pole sections, and rolled graphic together in a single organized package — critical when you are juggling other gear across a multi-day show floor.

The fabric graphic itself is produced on 9 oz woven polyester with dye-sublimation printing, a process that bonds pigment into the fibers rather than sitting on top, so the image will not crack or peel with repeated rolling. Colors reproduce with a warmth and saturation that commodity vinyl cannot replicate, and the matte finish means no hot spots under harsh trade show lighting. Graphic dimensions for this configuration are 33.5 inches wide by 69 inches tall, and your artwork should be submitted at 100 dpi at full size (or 200 dpi at half size) with a bleed allowance on all edges.

Buyers who are weighing a taller format should note that the retractable banner stand 33×80 configuration is available within the same Silverwing line — a natural step up when the room height permits and the design calls for more vertical storytelling.

A Scenario: Product Spotlight at a Regional Dealer Meeting

Picture a sales rep setting up in a hotel breakout room two hours before a regional dealer meeting. The room seats 40, the ceilings are 9 feet, and the organizing team has taped off a narrow strip along the back wall for vendor displays. A full 92-inch banner would crowd the emergency exit sign; the 33.5 x 69 single sided fabric retractable banner stand slides into that strip with 15 inches of clearance overhead and sits flush against the wall without protruding into the walkway.

The rep unzips the carry bag, slots the two upright sections together, locks the top bar onto the cassette, and pulls the fabric panel upward until the pole tip seats. The product lifestyle image — printed in rich, press-like color on the dye-sub fabric — draws dealers’ eyes from across the room before the session even starts. At the end of the meeting, the whole unit retracts, rolls, and zips back into the bag in under 90 seconds. That kind of fast, clean teardown is exactly why this format gets pulled out of storage for every quarterly event rather than sitting in a closet.

Frequently Asked Questions

Is 69 inches tall enough, or should I be looking at a different height?

Sixty-nine inches — just under 5’9″ — puts the top of the graphic at or slightly above average eye level, which works well in seated-audience settings, retail shelving contexts, and any venue where ceiling height is restricted. If your venue has standard 10-foot ceilings and you want the graphic to fill the vertical space the way a traditional trade show banner does, the retractable banner stand 33×80 or the 92-inch Silverwing configuration would give you that extra reach. The retractable banner stand buying guide has a detailed breakdown of how height affects visual impact at different viewing distances if you want to work through the geometry before committing.

How does fabric compare to vinyl for a display like this?

Fabric wins on two counts: image quality and packability. The dye-sublimation process produces colors that are noticeably richer and more nuanced than solvent-printed vinyl, and the material folds rather than creases, so it rolls in and out of the cassette thousands of times without surface damage. Vinyl is lighter on the budget, which is why options like the econo roll retractable banner stand are popular for short-run or single-event use, but for a unit you plan to run at every show this year, the fabric graphic pays for itself in longevity and print quality.

Can I reorder just the graphic without replacing the hardware?

Yes. The cassette and upright pole are reusable indefinitely. When you rebrand or want a seasonal graphic refresh, you order a replacement graphic cut to the same 33.5 x 69 spec and it loads straight into the existing hardware. This is one of the reasons exhibitors who manage a rotating event calendar prefer the Silverwing system over lower-cost alternatives that integrate graphic and hardware into a single non-replaceable unit.

Put This Display to Work at Your Next Event

The 33.5 x 69 single sided fabric retractable banner stand ships as a complete, print-ready package with no hidden add-ons, and it is built to travel as hard as your schedule demands. Showfire’s full lineup of retractable banner stands covers every width and height combination in common use, and the pull up banner stands collection is worth a look if you need a value-tier alternative for a one-day event or a different format altogether. Ready to move forward? Configure your artwork, submit your files, and place your order — your display ships fast and arrives ready to deploy.