33.5 in. Silverwing Double-Sided Retractable Banner Stand – 69″H Fabric Graphic Package

Construction:
The Silverwing is finished in anodized aluminum and heavy duty plastic end plates. It is quick and simple to use and holds 33.5″w x 69″ to 92″H banners (with a 6″ bottom bleed).

Set up: Banner attaches by tape on the bottom and by Clamp bar on the top.

Graphic Material: Fabric Satin

Base Size: 35″W x 3″H x 8.5″D

Includes:

• (2) Single-Sided 33.5″w x 69″h Graphic Print
• Double-Sided Retractable Base
• Top cross bar
• Adjustable support pole
• Silverwing travel bag (11.5″ x 40″ x 4″)

From Unboxing to Display in Four Steps

Setup for the 33.5 x 69 fabric double sided retractable banner stand takes roughly two minutes once you have run through it the first time. Here is exactly how the process goes:

1. Open the carry case and remove the components. The package ships with the retractable base, the support pole sections, and the fabric graphic already attached to the top bar. No loose hardware bags, no mismatched parts.
2. Connect the pole sections. The telescoping support pole snaps together in two or three segments depending on your final height preference. Alignment is intuitive — each section clicks positive so you know the joint is secure.
3. Attach the pole to the base and hook the top bar. Slide the assembled pole into the base receiver, then loop the top bar hook over the pole tip. The graphic is now suspended and ready to pull.
4. Pull the graphic up from the base. Grip the base, pull the fabric smoothly upward until it is taut, and the spring mechanism locks the graphic in position. Both faces are now fully visible and under even tension.

Breakdown reverses these steps in about the same time. The retractable mechanism handles the graphic carefully, so fabric stays smooth show after show.

33.5 x 69 Fabric Double Sided Retractable Banner Stand — Print and Material Details

The graphic substrate on this package is a soft-hand polyester fabric printed via dye-sublimation, which forces ink into the fiber rather than sitting on top of it. The result is a surface that does not crack, peel, or fade the way solvent-printed vinyl can after repeated handling. Colors reproduce at full saturation with smooth gradients, making photography, illustrated backgrounds, and brand color fields all look polished at close range.

The double-sided design uses two independently printed fabric panels tensioned through the Silverwing base, so each face carries its own complete graphic — not a mirror or bleed-through of the opposite side. This matters most when your two audiences need different messages: a trade-show attendee approaching from the aisle sees your product headline, while foot traffic passing behind the booth sees a QR code or contact call-out.

The 69-inch height positions this unit between compact tabletop formats and the taller 80- and 92-inch configurations. For buyers who have already evaluated a retractable banner 33×79 or a 33×80 retractable banner stand and found them slightly too tall for a particular venue ceiling or backdrop wall, the 69-inch format offers a practical step down without sacrificing width.

Fitting This Stand Into a Broader Display Strategy

A single 33.5 x 69 fabric double sided retractable banner stand covers a lot of ground at a booth, but most exhibitors combine it with complementary formats for a layered look. The silverwing banner stand line extends up to 92 inches tall, so pairing this 69-inch unit with a taller single-sided Silverwing at the back of the booth creates depth and visual hierarchy across the display footprint.

If your budget calls for a simpler supporting display, the econo roll banner stand is a cost-effective single-sided option that works well as a secondary sign at registration tables or session entrances. For events where multiple banner positions are needed across a large exhibit hall, the trade show retractable banner stands in the Pull Up Banner Stand pull-up line offer a consistent hardware profile that pairs cleanly alongside the Silverwing.

Before committing to any configuration, it pays to read through the retractable banner stand buying guide — it walks through fabric vs. vinyl substrates, height-to-width ratios, and how to match hardware grade to show frequency in plain terms.

The full range of retractable banner stands available through Showfire covers single-sided, double-sided, economy, and premium hardware so you can spec each position in your booth individually rather than buying a one-size kit.

Ready to Put Both Sides of Your Message to Work

The 33.5 x 69 fabric double sided retractable banner stand is ready to configure with your artwork today. Upload your files, confirm your graphic dimensions, and Showfire handles the rest — printing, assembly, and fast shipping so the display arrives before your next event. Visit the product page, add to cart, and put both faces of your display to work at the show.