33.5 in. Silverwing Double-Sided Retractable Banner Stand – 80″H Super Flat Graphic Package

Construction:
The Silverwing is finished in anodized aluminum and heavy duty plastic end plates. It is quick and simple to use and holds 33.5″w x 69″ to 92″H banners (with a 6″ bottom bleed).

Set up: Banner attaches by tape on the bottom and by Clamp bar on the top.

Graphic Material: Super Flat Vinyl – UV printed

Base Size: 35″W x 3″H x 8.5″D

Includes:

• (2) Single-Sided 33.5″w x 80″h Graphic Print
• Double-Sided Retractable Base
• Top cross bar
• Adjustable support pole
• Silverwing travel bag (11.5″ x 40″ x 4″)

Three Checkpoints Before You Commit to This Configuration

Does Your Venue Have Traffic Flowing From Multiple Directions?

The double-sided format justifies itself when viewers will approach your display from both the front and the back — think aisle intersections, open-plan showroom floors, lobby corridors, or event registration queues that flow both ways. If your display sits flush against a wall, a single-sided option may serve you better. The double sided retractable banner stand format in the Silverwing line is specifically engineered for freestanding placement where both graphic faces will be seen.

Is 80 Inches the Right Height for Your Space?

At 80″ tall, this stand clears the eyeline of nearly every adult viewer and projects well above neighboring table-height displays. Compare this to the retractable banner 33×79 footprint of certain competing hardware — the Silverwing’s full 80″ pull height gives you a small but meaningful advantage in vertical graphic real estate. If your venue has lower ceilings or drop fixtures that create visual obstructions, confirm ceiling clearance before ordering.

Is Super Flat Vinyl the Right Material for Your Graphics?

Super flat vinyl produces sharper edge definition and higher color saturation than standard gloss vinyl because the surface texture is minimized, reducing micro-glare across the face of the graphic. It is the preferred choice for photography-heavy artwork, large logo fields, and gradient backgrounds. If your content is primarily text on a solid color, standard vinyl will serve you adequately — but if print fidelity matters, super flat is worth it. Unsure which material fits your artwork? The retractable banner stand buying guide covers material selection in depth and is worth reading before you finalize your order.

What Separates the 33.5 x 80 Super Flat Vinyl Double Sided Retractable Banner Stand From the Field

Most retractable banner stands in this width range are sold as single-sided units with an upgrade path to double-sided that often involves different hardware entirely. The Silverwing line is designed from the base up to carry two independent graphic panels, which means the tension mechanism, the top rail, and the internal spring are all calibrated for dual-panel weight. That engineering choice matters in practice: both graphic faces pull taut and stay taut across a full event day, even in venues where HVAC airflow creates lateral pressure on freestanding displays.

The 33×80 retractable banner stand footprint also hits a practical sweet spot. It is wide enough to display complex artwork with multiple columns of content — a product lineup, a feature comparison, an image-and-text split layout — but narrow enough to fit comfortably in a 10-foot booth alongside other hardware without crowding the space. Exhibitors who run regional show schedules often pair two of these units at 45-degree angles to create a soft corner display that reads from three directions.

The silverwing banner stand hardware is finished in silver anodized aluminum, which photographs neutrally and does not compete visually with the graphic above it. The carry case is included in the package and holds both the stand and the double-sided graphic, keeping the total pack-out to one bag per unit. For exhibitors who move between venues via checked luggage or a small cargo van, that single-bag footprint is a meaningful logistical advantage.

From a broader display strategy perspective, this stand pairs well with other formats in the retractable category. If your booth also needs a shorter counter-height display, the pull up banner stands in the Pull Up Banner Stand line offer complementary sizing. And if budget is a factor for supplemental units — extra directional signage, for example — the econo roll banner stand provides a cost-efficient single-sided option that ships with the same quick-setup convenience. Browsing the full range of retractable banner stands will help you build a cohesive multi-unit kit without over-investing in hardware where simpler options are sufficient.

Graphic Specifications for the 33.5 x 80 Configuration

The print area for this package is 33.5″ x 80″ per face. Both faces are printed simultaneously as part of the package, so your order should include two artwork files — one for each side — sized to the same dimensions. Allow a standard bleed margin of 0.5″ on all edges, and embed all fonts to avoid substitution errors during preflight.

Put This Display to Work at Your Next Event

The 33.5 x 80 super flat vinyl double sided retractable banner stand is one of the most practical configurations in the Silverwing range for exhibitors who need to communicate in two directions from a single stand. Configure both graphic faces with your custom artwork, upload your files, and this unit ships complete with everything you need to deploy on event day. Order now and have your display ready before your next show date.