24 in. SilverStep Tabletop Retractable Banner Stand – Clamp Bar – Silver – 63″H Fabric Graphic Package

Clamp Top Bar (Recommended)

Only covering about ?” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates.

Velcro Top Bar

Attached on the backside of the graphic, the velcro top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

24”w Tabletop Graphic Package Includes:

(1) 63”h Single-Sided Fabric Graphic (installed)

(1) Silver Retractable Base with End Caps

(1) Telescopic Support Pole*

(1) Clamp Top Bar with End Caps

(1) Silverstep Travel Bag

*We shorten pole height by cutting bungee cord and removing sections.

Features

Material: Banner Fabric (Fab Ban)

Print Process: Full-Color Dye Sublimation

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 25.5”W x 3”H x 9.5”D

Shipping Dimensions: (1) box 6”L x 13”W x 29”H

Shipping Weight: 13 lbs

Artwork Size: 24”W x 63”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

Three Things to Confirm Before You Add This to Your Order

Does a 63″ Display Height Clear Your Table Setup?

The 63″ finished height is measured from the base of the stand, not from the tabletop. Set it on a standard 30″-high table and the top of the graphic reaches roughly 93″ from the floor — visible well above seated attendees and conference signage. If your venue uses lower display tables or you need a taller visual footprint on the same table, review the full range of heights available in the 24 inch tabletop retractable banner stand lineup before finalizing your order.

Is Fabric the Right Substrate for Your Graphic?

Fabric graphics produced via dye-sublimation printing deliver gallery-quality color depth that holds up through repeated rolling and unrolling. The surface is matte, which eliminates the glare that sometimes washes out vinyl graphics under overhead convention center lighting. If your design relies on photographic backgrounds, brand color accuracy, or detailed illustration work, fabric is the substrate that delivers. For a broader look at how fabric compares to vinyl across different stand types, the retractable banner stand buying guide covers both substrates in practical detail.

Is Your Artwork Prepared for a Clamp Bar Graphic?

The clamp bar top rail grips the graphic across its full 24″ width, so the finished artwork must include adequate bleed at both the top and bottom edges. Your graphic file should be sized to the exact dimensions specified on the product page, saved at 100–150 DPI at full scale (or equivalent at a reduced scale), and submitted as a print-ready PDF or high-resolution TIFF. If your designer is new to retractable banner files, the artwork template linked from the product page eliminates guesswork.

What Sets This Configuration Apart From Other Tabletop Options

The silver finish is not just aesthetic — it signals a level of hardware quality that registers immediately when someone walks past your table. The aluminum housing is heavier than entry-level plastic-base competitors, which means the stand sits flat without rocking even on slightly uneven folding tables common at hotel ballroom events. The clamp bar mechanism itself is straightforward: slide the top edge of the fabric into the rail, tighten, and the graphic is locked in place with even tension across the full width. Graphic swaps take under two minutes, which matters when you are rotating creative between morning sessions and afternoon workshops at a multi-day conference.

The silverstep retractable banner stand line is engineered for exhibitors who use the same hardware across many events, and this tabletop version shares that same philosophy. The base cassette is built to handle hundreds of rolling cycles without the spring tension degrading, and the anodized silver finish resists scratching during transport. Because the graphic is fabric rather than vinyl, it compresses smaller when rolled, and the included carrying bag accommodates both the hardware and the graphic in one slim sleeve.

The silverstep tabletop 24 retractable banner is specifically proportioned for narrow display surfaces where a full-size floor stand would be impractical — think product demonstration tables, check-in counters, reception desks, and point-of-sale displays in retail environments. The 24″ width also makes it a natural fit as a secondary display paired with a larger floor stand, positioned at table height to catch visitors who stop to pick up a brochure or sample.

If your program involves multiple table positions or you need to cover more surface width than a single 24″ unit can address, the silverstep tabletop 36 banner stand offers 12 additional inches of display width on the same hardware platform. For setups where a wider presence is a priority, the 48 inch tabletop retractable banner stand in the same family covers a full half-table span without requiring a floor stand footprint.

Configure Your Graphic and Place Your Order

This 24 x 63 fabric tabletop retractable banner stand ships as a complete package — hardware, custom fabric graphic, and carry bag — so there is no second vendor to coordinate with and no separate shipping timeline to track. Upload your print-ready artwork, confirm your dimensions, and your complete display ships together. For exhibitors managing a larger show program, the silverstep 24 tabletop banner stand pairs cleanly with floor-standing units across the same product family, keeping your table and floor displays visually consistent. Order today and have a sharp, professional tabletop display ready for your next event.