24 in. SilverStep Tabletop Retractable Banner Stand – Clamp Bar – Black – 63″H Fabric Graphic Package

Clamp Top Bar (Recommended)

Only covering about ?” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates.

Velcro Top Bar

Attached on the backside of the graphic, the velcro top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

24″w Tabletop Graphic Package Includes:

(1) 63”h Single-Sided Fabric Graphic (installed)

(1) Black Retractable Base with End Caps

(1) Telescopic Support Pole*

(1) Clamp Top Bar with End Caps

(1) Silverstep Travel Bag

*We shorten pole height by cutting bungee cord and removing sections.

Features

Material: Banner Fabric (Fab Ban)

Print Process: Full-Color Dye Sublimation

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 25.5”W x 3”H x 9.5”D

Shipping Dimensions: (1) box 6”L x 13”W x 29”H

Shipping Weight: 13 lbs

Artwork Size: 24”W x 63”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

From Unboxing to a Live Display

Getting this stand onto a table and displaying your graphic is a short process. Here is the sequence from the moment you open the shipping box:

1. Lift the base from the case. The retractable mechanism and rolled graphic arrive together inside the compact black housing. Set the base on your table surface and confirm it sits flat before extending anything.
2. Extend the support pole. The telescoping pole connects to the top of the housing and locks at the correct height for a 63-inch display. There are no loose parts to misplace.
3. Pull the graphic upward. Grip the clamp bar at the top of the graphic and draw it smoothly out of the housing. The fabric unrolls evenly because the internal spring tension is calibrated for this graphic weight.
4. Attach the clamp bar to the pole top. The bar drops into the pole’s receiver and seats securely. Once it clicks into place, the graphic is held under consistent tension from both ends.
5. Check alignment and dress the edge. Run a hand down each side of the fabric to confirm there are no diagonal pulls. The clamp bar’s straight edge keeps the top perfectly level without adjustment.
6. Step back and verify. The full 63-inch graphic should be taut, plumb, and ready for foot traffic. Teardown reverses these steps in roughly the same time.

Print Quality and Finish Details Worth Examining Closely

The graphic substrate on this package is woven polyester fabric, and the difference shows up most clearly when you get within arm’s reach of the stand. Colors on fabric print with a soft, slightly matte depth that reads as intentional and considered rather than mass-produced. Fine text, small logos, and gradients all reproduce accurately because the print process lays ink directly into the fiber rather than sitting on top of a coated surface.

The clamp bar itself is a structural element that doubles as a finish detail. Its straight aluminum profile spans the full 24-inch width of the graphic, distributing tension evenly so the fabric does not bow or sag at the center. On a silverstep 24 tabletop banner stand, that even tension is especially visible because the relatively tall 63-inch height magnifies any bow that a weaker top-attachment system would leave behind.

For artwork, the graphic is printed to bleed so there are no white borders at the edges. Showfire’s art team reviews submitted files before production, and the package includes the custom print as a finished deliverable — not a blank hardware kit you then have to take to a print shop.

Choosing a Width That Fits Your Tabletop Program

The 24-inch format is the most compact option in the SilverStep tabletop family, and that footprint is a deliberate advantage in tight setups where a wider base would crowd other materials on the table. If your layout has more horizontal room to work with — or if you need to carry a longer headline across a broader graphic — the 36 inch tabletop retractable banner stand in the same family steps up to a 36-inch display width while keeping the same straightforward setup process.

For events where you are covering an eight-foot table with a single continuous brand presence, the silverstep tabletop 48 retractable banner stretches that footprint to 48 inches and pairs naturally with a second 24-inch unit on the opposite end of the table. Mixing widths across the same product family keeps the hardware language consistent — same black finish, same clamp bar attachment, same fabric substrate — so the overall presentation reads as coordinated rather than assembled from mismatched parts.

The full range of configuration options for this width lives on the 24 inch tabletop banner stand category page, where you can compare heights and substrate choices side by side before committing to a single configuration.

If you are still working through how a tabletop retractable fits into your broader display strategy, the retractable banner stand buying guide covers substrate comparisons, height selection, and venue-specific recommendations in detail.

Add This Configuration to Your Cart

The black 24 x 63 fabric tabletop retractable banner stand ships as a complete package — hardware, clamp bar, and your custom-printed fabric graphic — with no secondary order required. This 24 inch silverstep tabletop banner stand is a smart choice for any brand that needs a durable, professional tabletop display without a complicated setup. The wider silverstep retractable banner stand family also includes full-height floor-standing models if your program spans both table and floor space in the same exhibit.

Submit your artwork, confirm your dimensions, and place your order. The black 24 x 63 fabric tabletop retractable banner stand will be ready for your next event.