24 in. SilverStep Tabletop Retractable Banner Stand – Clamp Bar – Black – 63″H Super Flat Graphic Package

Clamp Top Bar (Recommended)

Only covering about ?” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates.

Velcro Top Bar

Attached on the backside of the graphic, the velcro top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

24”w Tabletop Graphic Package Includes:

(1) 63”h Single-Sided Vinyl Graphic (installed)

(1) Black Retractable Base with End Caps

(1) Telescopic Support Pole*

(1) Clamp Top Bar with End Caps

(1) Silverstep Travel Bag

*We shorten pole height by cutting bungee cord and removing sections.

Features

Material: Super Flat Vinyl

Print Process: UV Cured

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 25.5”W x 3”H x 9.5”D

Shipping Dimensions: (1) box 6”L x 13”W x 29”H

Shipping Weight: 13 lbs

Artwork Size: 24”W x 63”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

Three Things to Confirm Before Choosing This Configuration

Does 63 Inches of Vertical Height Suit Your Table Setup?

At 63 inches, the graphic panel rises well above the tabletop surface — tall enough to be visible from across a room, but not so tall that it interferes with suspended ceilings or overhead signage in most venues. Measure from the table surface to any overhead obstruction before ordering, and remember that the stand base itself adds a small amount of additional height below the graphic’s bottom edge.

Is Super Flat Vinyl the Right Substrate for Your Environment?

Super flat vinyl is the correct choice when your graphic will be viewed under direct lighting, moved frequently between events, or stored for months between uses. The material resists creasing better than standard vinyl, tolerates repeated rolling into the cassette, and holds color without the yellowing that cheaper films develop over time. If you are still working through substrate options, the retractable banner stand buying guide covers the practical differences between vinyl and fabric in detail.

Is Your Artwork Sized and Formatted for a Clamp Bar Graphic?

A clamp bar graphic requires bleed and attachment margin at the top of the file so the hardware grips the print cleanly without cutting into the live image area. Your artwork must be submitted at the correct print dimensions with adequate resolution — typically 100 dpi at full size — and saved in the format specified in the print template. If your artwork was originally designed for a different width or for a floor-standing unit, it will need adjustment before production.

What Separates This Black Stand From Other Tabletop Options

Most tabletop retractable stands are priced and designed as budget giveaways — thin cassettes, weak springs, and graphics that ripple under overhead light. This black 24 x 63 super flat vinyl tabletop retractable banner stand takes a different approach. The cassette mechanism is built to the same standard as the full-height silverstep retractable banner stand lineup, which means the spring tension is calibrated for hundreds of deploy-and-retract cycles without losing its grip on the graphic.

The clamp bar is the key differentiator at this size. Where a simple pole-top cap relies on the graphic’s top edge to hold tension, the clamp bar spans the full 24-inch width and applies even, distributed pressure across the entire header. The result is a surface that stays flat under warm venue lighting, on uneven table surfaces, and during multi-day events where temperature shifts would otherwise cause a lesser graphic to bow.

The black anodized finish does more than look sharp — it resists scratching and does not show fingerprints the way silver or chrome finishes do, which matters when the stand is handled repeatedly by staff in a busy event setting. The included carrying case protects both the hardware and the rolled graphic during transport, so you are not improvising protective packaging before every show.

If your display program extends to wider surfaces or you need a second unit for a longer table, the silverstep tabletop 36 banner stand scales the same quality to a 36-inch footprint. Teams outfitting an entire event suite sometimes pair a 24-inch unit at a focused messaging point with a 48 inch tabletop retractable banner stand anchoring a wider backdrop area — both draw from the same hardware family, which simplifies setup logistics.

The silverstep tabletop 24 banner stand graphic is also replaceable without buying new hardware. When messaging changes between seasons or campaigns shift, you order a new print, swap the cassette, and the stand is back in service the same afternoon.

Ready to Add This Stand to Your Next Order?

The black 24 x 63 super flat vinyl tabletop retractable banner stand ships as a complete package — no separate trips to the print vendor, no mismatched components. Submit your print-ready artwork file, confirm your quantities, and this stand will arrive ready to deploy at your next event. For buyers who want to compare every Silverstep tabletop width and graphic combination before deciding, reviewing the full 24 inch tabletop retractable banner stand collection takes only a few minutes and ensures you order exactly the right configuration the first time. Add this package to your cart today and put a sharp, flat, professional graphic on your table at the next show.