24 In. SilverStep Tabletop – Clamp Bar – Silver – 76″H Super Flat Graphic Package

Clamp Top Bar (Recommended)

Only covering about ?” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates.

Velcro Top Bar

Attached on the backside of the graphic, the velcro top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

24”w Tabletop Graphic Package Includes:

(1) 76”h Single-Sided Vinyl Graphic (installed)

(1) Silver Retractable Base with End Caps

(1) Telescopic Support Pole*

(1) Clamp Top Bar with End Caps

(1) Silverstep Travel Bag

*We shorten pole height by cutting bungee cord and removing sections.

Features

Material: Super Flat Vinyl

Print Process: UV Cured

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 25.5”W x 3”H x 9.5”D

Shipping Dimensions: (1) box 6”L x 13”W x 29”H

Shipping Weight: 13 lbs

Artwork Size: 24”W x 76”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

Who Reaches for This Particular Configuration

A few specific buyer situations keep coming up for this stand, and they’re worth naming directly.

Product launches and pop-up retail. A brand releasing a new item in a boutique, hotel lobby, or specialty retailer needs something that sits on a display table, carries a bold product image, and disappears back into a carry bag at closing time. The 24 inch tabletop retractable banner fits that scenario precisely — the silver finish reads as neutral and premium, and the tall 76-inch graphic gives the product message enough vertical canvas to include a headline, supporting copy, and a product shot without crowding.

Conference rooms and corporate presentations. A marketing coordinator who sets up the same slide deck in a different city every week appreciates hardware that weighs almost nothing and sets up without tools. This stand rides in a carry bag alongside a laptop and lands on the credenza or side table in the meeting room with no assembly required beyond pulling the graphic up and locking the support pole.

Exhibitors who already run floor-standing units and need a compact companion. If your booth includes a 36 inch tabletop retractable banner stand or a larger floor model, a 24-inch tabletop unit is a natural complement for the table inside your display space — it fills the gap without competing with the primary structure visually.

What the Clamp Bar and Silver Finish Deliver at This Size

The clamp bar on this package is the detail that separates it from pole-top configurations. Instead of feeding the graphic over a thin rod, the clamp bar grips the full width of the top edge, distributing tension evenly and keeping the vinyl flat from corner to corner. For a 24-inch-wide graphic where every inch of print area is visible at close range, that flatness matters — visitors at a registration table are standing within arm’s reach of the display, and any bow or curl in the material is immediately obvious.

The silver hardware finish is a deliberate choice for neutral environments. Black finishes read well against light-colored booth backdrops; silver reads well against dark surfaces, wood conference tables, and draped registration counters. If your event environment varies from show to show, silver is the safer default.

Key features of this package at a glance:

• Super flat vinyl substrate — lies flat against the backer plate, minimizes glare under direct overhead lighting
• Clamp bar top rail — grips the graphic edge-to-edge for consistent, wrinkle-free tension
• Silver anodized aluminum base — lightweight, scratch-resistant finish that suits neutral and upscale settings
• 76″ extended height — tall enough to be readable across a table or counter without a floor-standing footprint
• Custom graphic included — hardware and printed graphic ship as a complete package

Before you finalize your substrate choice, the retractable banner stand buying guide has a clear breakdown of vinyl vs. fabric options that is worth reading if you are still comparing materials.

Setting Up, Swapping Graphics, and Keeping the Stand Ready for the Next Show

Setup on this stand is a two-step process. Pull the graphic up from the base housing, extend the support pole to the appropriate height, and seat the top of the pole behind the clamp bar. The whole sequence takes under 90 seconds once you have done it once. Retraction at the end of the day is equally fast — release the clamp bar, retract the graphic into the base with light, controlled pressure, and the stand is ready to be slid back into its carry bag.

Because the graphic is a separate component from the hardware, it can be replaced independently. If your messaging changes between seasons — a new product line, a revised promotion, an updated logo — you order a new printed graphic rather than new hardware. The base and clamp bar are built to handle regular cycling, so the hardware investment pays forward across multiple graphic runs.

Practical care tips:

• Store the retracted stand upright or flat in its carry bag — avoid stacking heavy items on top of the base, which can stress the retraction spring over time.
• Wipe the aluminum base with a dry or lightly damp cloth; avoid solvent-based cleaners on the finish.
• When traveling, check that the graphic is fully seated in the base before zipping the bag to avoid edge damage during transit.

For exhibitors who need a wider footprint on the same table — say, to cover a longer product spread — the silverstep tabletop 48 banner stand is available in the same family and uses the same setup mechanics, so your team will not need to learn anything new.

The full silverstep retractable banner stand line also includes floor-standing models in multiple widths, which pair well with this tabletop unit when you need to build out a larger exhibit presence around a central table display.

Order This Stand and Ship Your Graphic in One Step

Configure your artwork to the required dimensions for a 24 inch tabletop retractable banner stand, upload your file at checkout, and the complete package — hardware, graphic, and carry bag — ships as a single order. If you have questions about print specifications or want to confirm artwork dimensions before you upload, contact the Showfire Displays team directly and they will get back to you fast.