5 ft x 7.5 ft Lumiere Backlit Light Wall Kit – Single-Sided

Lumiere Light Wall 5ft x 7.5ft Single-Sided Graphic Package Includes:

• (1) Pop Up Frame
• (4) 2-Section Channel Bars
• (4) 3-Section Channel Bars
• (1) Channel Bar Bag
• (1) Carry Bag (for frame)
• (6) Ladder Light Sets
• (2) Travel Bag for Ladder Lights
• (2) Transformers
• (2) Transformer Power Cord
• (1) 5ft x 7.5ft backlit graphics
• (1) 5ft x 7.5ft blockoutgraphic
• (2) End Caps (either block out or printed)

Display Dimensions: 59.25 ” W x 88.75″ H x 14.5″ D
Graphic Dimensions: 59.25″ W x 88″ H
Frame Shipping Weight: 28 lbs (including graphics)
Frame Shipping Dimensions: 34″ L x 14″ W x 9″ H
Ladder Light Shipping Weight: 16 lbs
Ladder Light Shipping Dims: 7.5” L x 5.5” W x 30.5” H

The Booth Problem This Size Is Built to Solve

Picture a standard 10-foot inline booth: a six-foot table, two chairs, a product demo, and a backdrop that needs to do serious work to anchor the whole setup. Printed pipe-and-drape looks flat and forgettable under trade show lighting. Non-backlit fabric tension frames read well in a bright studio but wash out under fluorescent ceiling grids that cast unpredictable shadows across your graphic. The result is a booth that looks fine in the planning file and underwhelming on the show floor.

The core issue is contrast. Non-illuminated displays compete against the ambient light in the hall; backlit displays generate their own light, which means your graphic is always brighter than its surroundings. A 5ft x 7.5ft single sided seg backlit display solves the contrast problem at a size that actually fits the booth budget and the carry-case count.

How the Lumiere Frame Performs — Panel by Panel

The aluminum extrusion frame snaps together using internal connectors — no screws, no tools, no lost hardware between shows. Once the frame is assembled, the pre-sewn silicone bead on the fabric graphic feeds into the channel around the perimeter, stretching the material evenly in all four directions. The tension is self-correcting: pull the bead into the groove and the fabric automatically smooths itself flat. Graphic swaps take roughly five minutes once the frame is standing.

LED modules distribute light evenly across the depth of the frame before it diffuses through the fabric face. The result is a bright, consistent glow without hot spots or dark corners — the kind of illumination that makes photography gradients and skin tones in lifestyle imagery look as accurate as the original file.

Because the frame is designed for repeated graphic replacement, buying a second or third print for seasonal campaigns is straightforward — the hardware cost is a one-time investment. You can read broader purchasing guidance on the SEG backlit display guide to understand how total cost of ownership compares across different backlit formats before you finalize your order.

Right-Sizing This Configuration for Your Booth

The 5ft x 7.5ft single sided seg backlit display occupies roughly half the back wall of a 10-foot inline booth, which gives you flexibility most exhibitors underestimate. Pair it with a counter or shelf unit on one side and the backlit panel anchors the composition without crowding the space. Alternatively, position it centered behind a product table for a clean, symmetrical presentation.

If your assigned booth space is narrower — a peninsula end-cap or a literature station beside a main exhibit — the 2.5ft x 7.5ft lumiere backlit display at half this width covers tight configurations without sacrificing the height that makes the format read across a crowded hall. On the other end of the spectrum, exhibitors running a 20-foot inline who want a continuous lit back wall should look at the 10ft x 7.5ft lumiere backlit, which can be tiled with additional panels to fill large spans.

The broader lumiere backlit display collection covers every width in the lineup if you want to compare configurations side by side before choosing.

Note on Graphic File Preparation

Submit print-ready artwork at 100 dpi at full size, or 300 dpi at 1/3 scale. Include bleed to the silicone edge bead line. RGB color profile is preferred for backlit fabric.

Note on Power Requirements

The LED system runs on a standard 110V outlet. A single power cable routes discreetly through the frame leg to a floor connection — one outlet covers the entire panel.

Note on Carry and Transport

The collapsed frame and fabric graphic fit into the included padded carry bag. Total packed weight is manageable for a single person, and the bag is airline carry-on compatible for smaller regional shows.

Order Your 5ft x 7.5ft Lumiere Light Box Today

If your booth back wall is doing less work than it should, a 5ft x 7.5ft single sided seg backlit display is one of the most direct ways to fix that. The hardware travels in a single bag, sets up without a crew, and supports unlimited graphic refreshes — which means the frame you buy this quarter can be running a new campaign graphic by next quarter. To buy 5ft x 7.5ft lumiere backlit display hardware bundled with your custom graphic, add the configuration to your cart or contact the Showfire team for a fast turnaround quote. Stock and production slots fill ahead of peak show seasons, so getting your order placed early keeps your timeline on track.