Hanging Banner 16 ft. Wave 60 in. Double-Sided Graphic

This particular model is 16ft in diameter and 60in tall.
Graphic is included in price.

Includes:
(1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
(1) Full color zippered tension fabric graphic print
Nylon travel bag
Hanging Hardware

Finishing
Hem with zipper

Printing Material
Fabric

Construction
All aluminum frame construction

Warranty
One Year

What the 16 ft. Wave Hanging Banner Kit Delivers

The complete wave hanging banner kit ships as a ready-to-hang package: aluminum pole segments, a stainless-steel suspension cable with swivel hardware, two fully printed dye-sublimated fabric panels (inside face and outside face), and a zipper carry bag sized to the entire assembly. There is no sourcing separate hardware or printing panels independently — everything required to get this sign in the air arrives together.

The stretch fabric used for the panels is a knit polyester that conforms to the wave frame’s curvature without wrinkling or sagging. Because the material is tensioned across the frame rather than hung loosely, the graphic surface stays taut throughout a multi-day show — no drooping corners or bubbled panels mid-event. Both the inside and outside faces accept full-bleed artwork printed edge to edge, so there are no unprinted borders narrowing your design real estate. For exhibitors who consult the trade show hanging banner guide before finalizing their overhead plan, this double-sided format consistently emerges as the most efficient way to maximize visual coverage from a single hang point.

One Show Day With This Banner Overhead

Picture a 20 x 20 island booth at a regional industry trade show. The exhibit hall ceiling sits at roughly 22 ft., giving the venue adequate rigging clearance for the 16 ft. drop. The banner goes up during the morning setup window: poles connect by press-fit joint, fabric panels zip onto the frame from both sides, and the cable assembly clips to the rigging motor in a sequence that two people can complete in under 20 minutes.

By the time the hall opens, the wave silhouette is visible from the main entrance aisle and from the cross-aisle running perpendicular — two sightlines covered by a single overhead piece. Attendees walking either corridor see a full-color branded graphic rather than the back side of a single-face panel. At the end of the three-day event, the banner breaks down in roughly the same window it took to assemble, fits back into its carry bag, and travels home ready for the next show.

FAQ — Real Questions From Buyers

Does the “inside graphic” or “outside graphic” orientation change how the banner looks from the floor?

The inside graphic faces inward toward the curve’s hollow — the side that reads cleanest when attendees are standing directly under the wave. The outside graphic faces the convex side, which is what visitors see first as they approach from either end of the aisle. Both faces are fully printed; the distinction matters for how you design your artwork flow, not for print quality or coverage. Many buyers orient the hero logo toward the outside face so it reads before a visitor even enters the booth zone.

Will this kit work with standard trade show rigging motors?

Yes. The suspension cable and swivel hardware included in this wave hanging banner kit are compatible with standard 3/8 in. and 1/2 in. trade show rigging motors. Confirm with your venue that ceiling rigging is available and that their hang height accommodates a 16 ft. drop — most convention centers with 20 ft. or higher ceilings clear this without issue. Your event services contractor handles the actual motor attachment; the hardware in the kit connects to their system the same way any other certified overhead sign would.

Can I swap the fabric panels between shows without replacing the frame?

Yes. The fabric panels are separate components from the aluminum frame. If you want to update your graphic for a new campaign or a different show, you order replacement printed panels, zip them onto the existing frame, and the kit is current again. This is one of the main reasons exhibitors who buy trade show hanging signs in this format find the long-term cost lower than it first appears — the reusable aluminum hardware is the expensive part, and you buy it once.

Configure Your Wave Hanging Banner Kit and Get Into Production

If the 60 in. width of this wave is wider than your booth plan calls for, the serpentine hanging banner collection includes narrower configurations at the same 16 ft. drop. Exhibitors who also need a different overhead silhouette for a secondary space — a round shape over a product demo station, for instance — will find the circle hanging banner a natural complement. And if your booth uses a grid or modular display system that favors straight edges, the square hanging banner fits that geometry precisely.

Ready to move forward? Select your graphic orientation, upload your artwork file, and place your order directly on this page. Production begins as soon as your file clears preflight — and free shipping means the finished kit arrives at your door or your show site without an added freight line on the invoice. Order yours today.