Hanging Banner 16 ft. Wave 60 in. Single-Sided Graphic

This particular model is 16ft in diameter and 60in tall.
Graphic is included in price.

Includes:
(1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
(1) Full color zippered tension fabric graphic print
Nylon travel bag
Hanging Hardware

Finishing
Hem with zipper

Printing Material
Fabric

Construction
All aluminum frame construction

Warranty
One Year

The Overhead Visibility Gap This Size Is Designed to Fill

Exhibitors frequently discover the same problem after their first island booth: floor-level signage disappears the moment foot traffic builds and neighboring booths fill in around them. A sign that looks substantial in an empty hall becomes nearly invisible once the show opens. The only reliable fix is height — getting your brand into the airspace above competing displays where nothing else is blocking the view. The challenge is that most hanging sign formats in the 12-to-16-foot range use flat panels, which read well from one direction but thin out visually as attendees approach from the side or at an angle. That lost visibility is real lost opportunity across a three-day event.

The serpentine hanging banner profile solves that problem structurally. Because the frame curves through an S-shape, the graphic presents a different face width depending on the viewing angle, maintaining a sense of presence from nearly any position on the floor. At 16 feet tall and 60 inches wide, the display occupies enough vertical real estate to clear the tops of standard 10-foot booth structures and remain legible well into the adjacent aisles.

What This Kit Delivers — Frame, Fabric, and Print Specs

The wave hanging banner at this size is built around a lightweight aluminum tube frame that assembles without tools. The curved sections connect via internal bungee cord segments, so the wave profile snaps into shape rather than requiring manual alignment at each joint. A swivel rigging ring at the top of the frame allows free rotation, which means the banner can pivot to face the highest-traffic aisle without twisting the suspension cables.

The fabric graphic is produced using high-temperature dye-sublimation, which bonds pigment directly into the polyester fibers rather than sitting on top as an ink layer. The result is a print that resists fading under trade show lighting, will not crack or peel with repeated packing, and stays vibrant through multiple show cycles. Colors are reproduced at full saturation across the entire 60-inch drop, with no visible banding or seaming at the center of the panel.

Artwork File Setup

Submit print-ready files as PDF or high-resolution TIFF at 100 dpi at full size, or 300 dpi at 33% scale. All critical content — logos, taglines, contact information — should stay at least 1.5 inches inside the finished edge. A bleed of 0.5 inches on all sides is required; the template is available for download from the product page after you configure your order.

Rigging Clearance to Verify

Standard trade show venues require a minimum of 4 feet of clearance between the bottom of a hanging sign and the top of the booth structure beneath it. At 16 feet finished height, confirm with your show coordinator that the ceiling grid or rigging rail in your hall is rated for the total suspended weight and sits high enough to meet venue regulations before submitting your booth plan.

Single-Sided vs. Double-Sided for This Configuration

Single-sided print is the right call when the booth backs against a wall or when the highest-value aisle faces one primary direction. If your island booth has significant traffic approaching from opposite sides, a double-sided option is available in the wave shape hanging banner collection and may deliver better coverage for your floor plan.

How This Banner Fits Into a Larger Overhead Strategy

This product sits within the broader trade show hanging signs category, which includes formats ranging from compact accent pieces to full 20-foot overhead structures. If your display team is also planning a secondary sign for a breakout area or a co-exhibitor’s adjacent booth, the circle hanging banner is a compact companion format that complements the wave profile without competing visually. For booths using a strict geometric brand system, the square hanging banner offers a structured overhead option that pairs cleanly with modular booth systems.

For a deeper look at how ceiling-hung formats compare across booth sizes and configurations, the trade show hanging banner guide covers rigging logistics, size selection by booth footprint, and graphic orientation decisions in full detail — useful reading before you finalize this order.

Place Your Order and Get This Wave Ceiling Banner Into Production

This wave ceiling banner ships fully kitted with frame, fabric graphic, swivel rigging hardware, and carry bag — everything required to hang on-site with no supplementary purchases. Production runs on a fast turnaround schedule, and the finished kit qualifies for free shipping to the continental US. Configure your graphic, upload your artwork, and get this wave ceiling banner into production today by ordering directly from the product page — your overhead visibility at the next show depends on it.