5 ft Triangle Hanging Banner Kit – 60 in. Drop

This particular model is 5ft in diameter and 60in tall.
Graphic is included in price.

• (1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
• (1) Full color zippered tension fabric graphic print
• Nylon travel bag
• Hanging Cable
• Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener

Finishing
Hem with zipper

Printing Material
Fabric

Construction
All aluminum frame construction

Warranty
One Year

Setting Up Your 5 ft x 60 in Triangle Hanging Banner From the Ground Up

Getting this sign in the air is a straightforward process when you follow the steps in sequence.

1. Lay out all components — Unpack the carry bag and identify the three perimeter poles, the vertical drop tube, connectors, and the fabric graphic. Confirm nothing is missing before you leave the unboxing area.
2. Assemble the triangular frame — Connect the three perimeter sections at the corner hubs. The poles click into place at each hub point; press firmly until you hear each connection seat.
3. Thread the fabric onto the frame — Slide the graphic’s pole pockets over the assembled perimeter sections. The fabric is pre-sewn to match this specific frame geometry, so alignment is self-correcting as you work around each edge.
4. Attach the vertical drop tube — Connect the center drop tube to the apex fitting at the top of the triangle. This tube is what your rigger will cable to the venue’s rigging point.
5. Coordinate with your venue rigger — Pass the rigging cable through the top of the drop tube and confirm the hanging height with the show decorator before the sign goes up. Most venues require all rigging to be handled by their certified crew.
6. Inspect and tension — Once the sign is at height, check that the fabric is taut across all three faces and that the frame sits level. Minor adjustments at the corner hubs correct any tilt before the show opens.

Fabric, Ink, and the Details You Notice at Close Range

The graphic on this 5 ft x 60 in triangle hanging banner is printed on a lightweight, stretch-woven polyester that muffles venue noise rather than amplifying it — a subtle but real quality indicator you will notice in open hall environments. Dye-sublimation printing produces continuous-tone color gradients and photographic imagery without the visible dot patterns that plague vinyl inkjet output. Because the ink becomes part of the fiber, the surface does not flake, crack, or fade under standard show lighting, including LED wash fixtures that run hot.

Edges are finished with sewn pole pockets that sit flush against the frame — no visible grommets or clips that interrupt the graphic at the border. The hardware is powder-coated aluminum, light enough to keep the shipping weight down but rigid enough to hold the fabric taut under ceiling airflow. A double sided 5ft triangle hanging banner configuration means both exterior faces display full artwork; the interior, which faces the booth below, can be left unprinted or optionally printed as well depending on your order configuration.

For an overview of how fabric construction and hardware specifications affect buying decisions across sign formats, the trade show hanging banner guide covers material grades, rigging clearance requirements, and venue compliance in useful detail.

How This Size Relates to the Rest of the Triangle Format Range

The five-foot-wide triangle occupies a practical middle position within the triangle hanging banner format range — large enough to carry complex artwork and small enough to suit 10 x 10 and 10 x 20 booth footprints where ceiling clearance may be tighter than in a full island exhibit.

If your booth footprint expands at a future event, the 8ft triangle hanging banner scales up the frame width while maintaining the same assembly logic and graphic replacement system, so your team will not need to relearn the setup process. Exhibitors planning large island exhibits — 20 x 20 or bigger — sometimes step up further to the 10ft triangle hanging sign, which provides the frame width needed to stay proportional at greater ceiling heights.

A custom 5ft triangle hanging banner order can include logo lockups, photographic backgrounds, or single-color brand fields — the dye-sub process handles all of them with equal fidelity, so the right choice depends on your artwork, not the printing method.

The suspended trade show banner guidance on the pillar page is particularly useful if this is your first ceiling sign purchase, since it walks through the venue approval process step by step.

Place Your Order for the 5 ft x 60 in Triangle Hanging Banner Today

This kit is built to work from the first setup and keep working across multiple show cycles. The 5 ft x 60 in triangle hanging banner ships complete with all hardware and your custom-printed fabric graphic — nothing extra to source before show day. Select your graphic options, upload your artwork, and get your order confirmed so production can begin.