10 ft Triangle Hanging Banner Kit – 24 in. Drop

This particular model is 10ft in diameter and 24ft tall.
Graphic is included in price.

• (1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
• (1) Full color zippered tension fabric graphic print
• Nylon travel bag
• Hanging Cable
• Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener

Finishing
Hem with zipper

Printing Material
Fabric

Construction
All aluminum frame construction

Warranty
One Year

From Dock to Ceiling: Setting Up the 10 ft x 24 in Triangle Hanging Banner

The assembly sequence for this kit is straightforward enough to complete without tools, and most exhibitors finish it in under twenty minutes from opening the bag to clipping the last carabiner.

1. Unpack and sort the frame sections. The aluminum poles are color-coded and labeled, so matching them takes seconds. Lay them out on the booth floor before you begin.
2. Assemble the triangle frame. Snap the poles into their hub connectors at each corner. The frame clicks firmly into position and holds its geometry without additional fasteners.
3. Sleeve the graphic onto the frame. The dye-sub fabric graphic slips over the assembled frame through fabric sleeves at each edge. Tension across the face is built into the sleeve fit, so no additional stretching or adjustment is usually needed.
4. Attach the hanging cables. The rigging cables connect to the frame’s corner hubs and meet at a single suspension point above. Adjust the cable lengths to level the sign before you send it up.
5. Raise and secure. The venue rigger lifts the assembled sign to its ceiling anchor point. Because the total package is light, most venues approve it quickly and single-point rigging is typically sufficient.
6. Confirm levelness from the floor. Step back and check that all three faces hang at even tension. Minor cable adjustments take under a minute.

Print, Fabric, and Finish — What You See Up Close

The graphic on this kit is printed using dye-sublimation, a process that bonds color directly into the polyester weave rather than coating the surface. The result is color that will not crack, peel, or fade after repeated installation cycles — important when the same sign may go up a dozen or more times across a show season. Saturation is vivid even at the shallow 24-inch drop, where viewers are relatively close to the hanging face.

Because the fabric stretches over a rigid frame rather than a banner bar, the printed face stays taut regardless of ambient airflow — an advantage in convention centers where HVAC drafts can make loose banners billow. A custom 10ft triangle hanging banner ordered here can carry your full-bleed logo, product photography, or a brand color field without visible seams or borders interrupting the image.

For artwork, submit print-ready files at the recommended resolution (typically 100 dpi at full scale) in the provided template. The graphic prints slightly oversized to account for the sleeve wrap, and bleed areas are marked in the template so nothing critical is trimmed.

Pairing This Configuration With Other Triangle Sizes

The 10-foot triangle frame is a confident overhead anchor for a 20×20 island booth, but multi-booth exhibitors often run multiple triangle sizes in the same hall to break up ceiling real estate at different heights. If your adjacent booth is smaller and you want a secondary overhead marker, the 8ft triangle hanging banner uses the same hardware system and can hang from the same rigging crew pass, saving labor costs. For smaller footprint displays — a kiosk or a single 10×10 space — the 5ft triangle ceiling banner provides proportional overhead coverage without overwhelming the space below.

The full triangle hanging banner with hardware collection covers all available frame sizes and every drop depth, which makes it easy to spec consistent ceiling displays across an entire event program. If you are newer to overhead displays and want guidance on venue approval processes, rigging categories, and how to match sign dimensions to booth footprints, the trade show hanging banner guide walks through all of it in detail.

One practical note: the 10ft triangle hanging banner with hardware ships in a single carry bag that fits in standard cargo vans and SUVs. No freight account or oversized shipping is required for most domestic destinations.

Ready to Order Your 10 ft x 24 in Triangle Hanging Banner

Configure your graphic, confirm your drop preference, and place your order directly on the product page. Production timelines are competitive, and the kit ships complete — frame, hardware, and custom-printed graphic together — so you are not waiting on separate vendors to coordinate delivery. The fabric triangle hanging banner collection ships to exhibitors across North America, and rush options are available if your show date is close. Secure your overhead space now — the 10 ft x 24 in triangle hanging banner is one of the most versatile configurations in the lineup, and it books out fast ahead of peak show seasons.