15 ft Circle Hanging Banner Kit – 42 in. Drop

This particular model is 15ft in diameter and 42 inches tall.
Graphic is included in price.

• (1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
• (1) Full color zippered tension fabric graphic print
• Nylon travel bag
• Hanging Cable
• Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener

Graphic Material
Fabric

Graphic Finishing
Hem with zipper

Construction
All aluminum frame construction

Warranty
1 Year on Graphic
1 Year on Frame

Setting Up Your 15 ft x 42 in Circle Hanging Banner: Step by Step

One reason exhibitors return to this kit is that the assembly process is repeatable and predictable. Here is the sequence from unboxing to a banner hanging overhead:

1. Lay out the frame sections. The aluminum hub-and-spoke frame ships broken into segments that connect at numbered joints. Spread them on the floor and match the numbers before locking any piece in place.
2. Attach the outer ring. Flexible perimeter poles click into the hub arms to form the full 15-foot circle. A light flex-and-snap action seats each pole — no hammering or forcing required.
3. Slip on the fabric graphic. The printed stretch fabric has a sewn pocket along the interior edge. Feed the frame through the pocket, working around the circle, until the graphic lies taut and wrinkle-free across the face of the banner.
4. Connect the hanging cables. Stainless steel cables attach to four rigging points on the frame. Adjust each cable to even tension before lifting so the banner hangs level.
5. Rig and raise. Hand the cables off to your venue rigger or run them through your booth’s truss system. Once raised, fine-tune cable length from below until the face sits perfectly horizontal.

The entire process — frame assembly through fabric attachment — typically runs 20 to 30 minutes for a crew that has done it once before.

What the Print, Fabric, and Finish Look Like at Close Range

The 15ft circle hanging banner kit uses 100% polyester stretch knit fabric printed with a full-color dye-sublimation process. Dye-sub ink bonds to the fiber rather than sitting on top of it, which means the image does not crack, peel, or fade under convention center lighting the way vinyl-applied graphics sometimes do.

Because the fabric stretches over the frame rather than clipping to it, there are no visible grommets or border seams on the face of the graphic. From the floor, the finished banner looks clean on both sides — especially useful for island booths where attendees approach from multiple directions. If you want visibility from every angle, the double-sided option prints a separate graphic panel for the reverse face, doubling your messaging surface without requiring a second frame.

Edges are finished with a sewn hem that holds its shape after repeated stretching and washing. The custom 15ft circle hanging banner leaves our facility only after a quality inspection confirms color consistency and even fabric tension.

Pairing This Configuration With Other Sizes in the Circle Family

Large booths rarely use a single hanging element. A common approach at 20 x 20 and larger footprints is to anchor the space with the primary 15 ft x 42 in circle hanging banner at the center, then add smaller accent pieces above product displays or seating clusters at the corners.

If your booth layout calls for secondary overhead markers, the 8ft circle hanging banner is proportionally compatible — its eight-foot diameter pairs naturally with a 15-foot centerpiece without competing for visual dominance. For even smaller accent points above kiosks or individual counters, the 5ft circle hanging sign provides overhead identification in a compact footprint.

The 15ft circle hanging banner with hardware is also a natural fit alongside other shapes in the hanging sign lineup. Before committing to a final overhead display plan, the trade show hanging banner guide walks through ceiling height requirements, rigging point placement, and how to calculate the right number of overhead pieces for your booth dimensions — worth a read if this is your first time coordinating a multi-element overhead display.

The 15ft round hanging banner is the largest standard configuration in the circle range, so it tends to set the visual hierarchy for everything else in your overhead display strategy.

Configure Your 15 ft x 42 in Circle Hanging Banner and Order

The custom 15ft circle hanging banner is ready to configure directly on the product page — choose single- or double-sided printing, upload your print-ready artwork, and confirm your order. Production and shipping timelines are listed at checkout. If your artwork is not ready yet, the product page also details file specifications and template downloads so your designer can build to the exact dimensions. Order now and have your overhead display ready for your next event.