33.5 in. Silverwing Single-Sided Retractable Banner Stand – 92″H Super Flat Graphic Package

Construction:
The Silverwing is finished in anodized aluminum and heavy duty plastic end plates. It is quick and simple to use and holds 33.5″w x 69″ to 92″H banners (with a 6″ bottom bleed).

Set up: Banner attaches by tape on the bottom and by Clamp bar on the top.

Graphic Material: Super Flat Vinyl – UV printed

Base Size: 35″W x 3″H x 8.5″D

Includes:

• (1) Single-Sided 33.5″w x 92″h Graphic Print
• Retractable Base
• Top cross bar
• Adjustable support pole
• Silverwing travel bag (11.5″ x 40″ x 4″)

How the 33.5 x 92 Super Flat Vinyl Single Sided Retractable Banner Stand Stacks Up Against Common Alternatives

Choosing between format sizes and graphic materials is easier when the tradeoffs are side by side. The table below compares this stand against two formats that buyers frequently consider at the same time. For a deeper look at how materials and mechanisms differ across the full lineup, the retractable banner stand buying guide covers substrate options, height trade-offs, and mechanism grades in plain language.

Buyers who specifically need the 80-inch height — because of a low ceiling or a venue with a strict height limit — will find the retractable banner stand 33×80 a sensible step down. However, if your venue allows it, the 12 extra inches of the 92-inch configuration give your graphic a visual weight that noticeably increases visibility from distance. The fabric variant at this same 92-inch height produces a softer, more textile feel, but super flat vinyl outperforms it on color saturation and resistance to scuffing during repeated retraction cycles.

Where This Display Configuration Performs

The 33.5 x 92 super flat vinyl single sided retractable banner stand earns its keep in environments where a single sharp graphic needs to carry the full burden of your brand presence. Here are the settings where it consistently delivers:

• Trade show booths (10 x 10 and 10 x 20): Positioned at the back wall or entry point, the 92-inch height clears the sightline above table-height obstacles and neighboring displays.
• Hotel pre-function corridors: Placed beside directional signage at a conference, this format gives sponsors and event organizers a professional anchor graphic without requiring a full booth structure.
• Retail point-of-sale areas: Seasonal promotions, product launches, and service callouts benefit from the graphic’s vivid vinyl output under standard fluorescent and LED store lighting.
• Corporate lobby and reception areas: A single well-designed 92-inch retractable graphic communicates brand values at eye level and above without permanent wall installation.
• Outdoor-adjacent environments: Super flat vinyl holds up better than fabric in lightly humid or breezy indoor settings, such as convention center loading docks or airport concourses.

If your team rotates through multiple venues with different ceiling heights, it is worth knowing that buyers who need a budget-friendly fallback often keep an economy retractable banner stand in their kit for setups where the Silverwing hardware is not justified by the event scale. Conversely, exhibitors who run large 20 x 20 islands frequently pair Silverwing units with trade show pull up banner configurations along the perimeter to maintain visual continuity across the booth footprint.

What the Package Includes and How to Prepare Your Artwork

Every order includes the Silverwing aluminum base, the retractable cassette mechanism, a bungee-corded support pole, a custom-printed super flat vinyl graphic sized to this stand’s exact dimensions, and a padded carry bag. The graphic prints to approximately 33.5″ x 92″ and attaches via a top bar and the base cassette lip — no adhesive, no grommets required.

For artwork, set your file to 33.5″ x 95″ at 100 dpi (or proportionally scaled) to include bleed at the top and allow for the cassette wrap at the bottom. Keep critical text and logos at least 1.5 inches from each edge. RGB color mode is preferred; CMYK files are accepted but colors may shift slightly on output. Vector elements should be embedded or outlined, and any fonts must be converted to outlines before export.

The silverwing banner stand page includes a downloadable template that maps the print area, bleed zone, and cassette wrap — using it from the start will prevent artwork revisions and speed your proof approval.

If you are still narrowing down the right format across the broader range of retractable banner stands available at Showfire, filtering by height and width on that category page will surface the options closest to your requirements without guesswork.

Ready to Order Your Display

The 33.5 x 92 super flat vinyl single sided retractable banner stand is a dependable, high-impact format for any exhibitor, marketer, or event planner who needs full-height visibility without complicated logistics. The super flat vinyl substrate keeps your graphic looking sharp after dozens of retraction cycles, the included carry bag makes transport a one-person job, and the precision cassette mechanism means setup at each new venue takes less time than finding a parking spot. Upload your artwork, confirm your proof, and your finished display ships fast — ready to work at the next event on your calendar.