Pop Up Banners Stands – 48 in. SilverStep(R) Tabletop 59″h Fabric Graphic

Clamp Top Bar (Recommended)

Only covering about 3/8” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates

Hook and Loop Top Bar

Attached on the backside of the graphic, the hook and loop top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

48″w Tabletop Graphic Package Includes:

• (1) 36”h Single-Sided Vinyl Graphic (installed)
• (1) Silver Retractable Base with End Caps
• (2) Telescopic Support Pole*
• (1) Clamp Top Bar with End Caps
• (1) Silverstep Travel Bag

*We shorten pole height by cutting bungee cord and removing sections

Features

• Material: Super Flat Vinyl
• Print Process: UV Cured
• Warranty: Lifetime on hardware; one (1) year on graphics
• Stand Size: 49.5”W x 3”H x 9.5”D,
• Shipping Dimensions: (1) box 6”L x 13”W x 53”H
• Shipping Weight: 23 lbs
• Artwork Size: 48”W x 36”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

How the Clamp Bar Rail and Dye-Sub Fabric Perform Together

The clamp bar mechanism is central to what makes this pop up banners stands package so reliable event after event. Rather than relying on adhesive strips or hook-and-loop tape, the clamp bar grips the top edge of the graphic with even pressure across the full width. That means no sagging corners, no curling edges, and a consistently flat presentation surface.

The fabric graphic itself is produced using dye-sublimation printing on polyester textile. Dye-sub ink bonds directly with the fibers instead of sitting on top, so the image resists fading, scratching, and peeling far longer than solvent-printed vinyl alternatives. The fabric is also inherently wrinkle-resistant — a huge plus after the graphic has been stored inside the retractable cassette between shows.

The hardware features a powder-coated aluminum finish that resists scuffs and fingerprints during repeated setup and teardown. For a deeper dive into how retractable mechanisms work across different models, the retractable banner stand guide covers everything from cassette types to graphic materials.

Practical Settings for a 48″ Tabletop Retractable Pull Up Banner

A retractable pull up banner this size hits a sweet spot: wide enough to display a full marketing message, yet compact enough to share a six-foot table with product samples or literature. Here are scenarios where this unit earns its place:

• Trade show vendor tables — Place it behind your product display so attendees can read your branding from across the aisle. Trade show pop up banners at tabletop height sit right at the sightline of seated visitors and standing traffic alike.
• Corporate lobbies and reception areas — Announce quarterly campaigns, safety reminders, or upcoming events without drilling into walls or renting freestanding signage.
• Retail checkout counters — Promote loyalty programs, seasonal deals, or new arrivals exactly where customers pause to complete a purchase.
• Conference registration desks — A 48″-wide graphic gives you enough room for a logo, event name, sponsor block, and directional info on a single panel.
• Classroom and training environments — Instructors can set the banner on a desk to reinforce key talking points without blocking the projector screen.

Because the cassette base sits flat and stable, the unit works indoors on virtually any level surface. If your events occasionally move outdoors, you might also consider pairing it with an outdoor retractable banner stand designed for wind and weather — but for controlled indoor environments, this tabletop model is built to perform.

Navigating the SilverStep Tabletop and Full-Height Lineup

The SilverStep family spans multiple widths in both tabletop and floor-standing formats. Choosing the right one depends on your display surface, venue size, and the amount of content your pull up banner designs need to communicate. Below is a quick comparison of the tabletop models:

If your venue offers floor space instead of table space, the full-height silverstep retractable banner stand collection includes models that extend well above standing eye level. For example, the silverstep 36 inch banner stand and the 48-inch Silverstep banner stand both offer taller graphic heights suited to booth backdrops and aisle-facing displays.

Need even more width for a step-and-repeat wall or a wide booth backdrop? The 60-inch Silverstep banner stand handles larger footprints, while the 24-inch Silverstep banner stand is ideal for narrow spaces or flanking a doorway. All models share the same retractable cassette design and clamp bar system, so switching between sizes never means learning new hardware.

For broader booth planning — backlit walls, hanging signs, and modular exhibits — the complete trade show displays buyer’s guide walks you through every category.

Keeping the Fabric Graphic Ready for Repeat Use

One of the strongest reasons to choose dye-sublimation fabric over vinyl is long-term durability. The ink is part of the fiber structure, so repeated rolling and unrolling inside the cassette does not crack or flake the printed image. Between events, retract the graphic fully into the base to shield it from dust and accidental damage.

If the fabric picks up a crease from storage, a quick pass with a garment steamer on low heat smooths it out without harming the print. Avoid direct contact with a hot iron — the polyester textile responds better to steam. For spot cleaning, a damp cloth with mild soap handles most smudges.

The powder-coated aluminum hardware needs even less attention. Wipe it down with a dry microfiber cloth after each event, and inspect the retraction spring periodically to ensure smooth operation. With basic care, this pop up banners stands package will serve you across dozens of deployments.

Grab This SilverStep Tabletop Clamp Bar Fabric Package

You have the details — dye-sublimation fabric, clamp bar rail, powder-coated aluminum, and a retractable cassette that protects your investment between shows. This 48″ SilverStep Tabletop pop up banners stands package is ready to ship and ready to impress at your next event. Add it to your cart now and pair it with any other display from the SilverStep lineup for a cohesive, professional booth setup.