VAIL 40S 2 X 3 Single Sided Graphic Package 1

Vail 40s 9×9 Single-Sided Graphic Package

Name: Vail 40s 9x9 Single-Sided Graphic Package
Brand: 9 Feet
SKU: WSVAIL40S9X9G1
Availability: InStock

$898.00

VAIL-40S 9′ x 9′ Single-Sided Graphic Package. With a solid outside finish unlike the ASPEN-40D, the VAIL-40S is a single-sided extrusion with a profile width of 40mm. The VAIL-40S is rigid because its backside has a longer metal edge for reinforcement, making it especially great for wall mounting and hanging overhead. Plus, it is lightweight; however, for widths longer than 4ft., it is not recommended to be used as a free-standing display without a support because of its thin profile width. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

SKU: WSVAIL40S9X9G1 Category: 9 Feet

Description
Additional information

Package Includes:

(1) 4-Sided Frame
(1) Custom Single-Sided Graphic (SEG hem)
(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
(5) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key
(2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench
(2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: To make one edge of the frame, take two cut VAIL-40S extrusions and, between, add Split Connector; tighten. Repeat this three times. Take two completed 9′ edges and slide in Corner Connector; tighten. Repeat this three times. Connect VAIL-40C to the other; tighten. Vertically insert ends of completed VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector.
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 108″W x 108″H x 1.57″D
Artwork Size: 110″W x 110″H
Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H