33.5 in. Steppy Retractable Banner Stand – 69″H Super Flat Graphic Package

Template Size: 33.5″W x 69″H
Construction:
Finished in anodized aluminum and heavy duty plastic end plates. Banner attaches to the top of stand by a clamp bar (with 6″ bleed on bottom.)
Graphic Materials: Super Flat Vinyl

Base Size: 35″W x 9.5″D x 3″H

Includes:
Retractable base w/ end caps
Telescopic pole
One Clamp top bar w/ end caps
Allen Key
Steppy Travel Bag

From Bag to Fully Assembled Display in Under Two Minutes

Setup on the show floor should never eat into your prep time, and this stand is built around that reality. Here is how a typical setup goes:

1. Unzip the carry bag and remove the cassette base. The base sits flat and stable on its own immediately — no legs to unfold or pins to seat.
2. Thread the telescoping pole into the base fitting. The pole locks at 69″ with a positive click; no loose connections that shift during the day.
3. Attach the top bar to the upper pole end. The clamp bar holds the top edge of the graphic taut and straight.
4. Pull the graphic up from the cassette and hook it onto the top bar. The spring-loaded cassette keeps constant tension on the vinyl from below.
5. Step back and confirm alignment. A quick visual check is all it takes — the steppy stable base banner is designed to sit plumb without adjustment.

Teardown reverses in roughly the same time. Release the top bar, let the cassette retract the graphic slowly and evenly, collapse the pole, and slide everything back into the bag.

What Super Flat Vinyl Delivers Up Close

Material choice shapes how a display looks in person, not just in a product photograph. The super flat vinyl used in the 33.5 x 69 super flat vinyl deluxe retractable banner stand is a matte-finish film that suppresses glare under the mixed lighting conditions — fluorescents, track lights, and direct daylight — common to most indoor venues. That matters because glossy vinyl can wash out under bright booth lighting, creating hot spots that dull the print no matter how well the artwork was prepared.

Colors print with high gamut density, meaning deep reds stay saturated and subtle gradients render smoothly rather than banding. The vinyl thickness is calibrated to retract cleanly into the cassette without creasing along the lower edge, a failure point common on thinner films. The clamp bar along the top compresses the graphic evenly across its full 33.5″ width, eliminating any wave or bow that could distort text or logo alignment. These are the details a buyer notices when standing next to a display rather than across the room from it.

How This Stand Fits Into the Broader Steppy Line — and When to Look Elsewhere

The steppy banner stand family covers several widths and graphic heights, so the 33.5 x 69″ configuration is the entry-level floor-height option in terms of width. If your display space is wider — say a 10-foot booth back wall — you would stack two or more units side by side rather than switching to a single wider format, because the Steppy’s appeal is its portability and clean profile, not its raw width.

For buyers who need a steppy banner stand for trade show use but have a tighter budget, the econo roll retractable banner stand is worth comparing directly — it trades some of the hardware durability for a lower upfront cost and suits lighter duty or one-time event use. When display requirements shift toward modular wall systems or tension fabric, browsing the full range of retractable banner stands on the hub page will surface the formats best matched to that format. And for event teams that need multiple formats — some floor-standing, some counter-height — the trade show pull up banner options provide additional variety worth reviewing before finalizing a multi-unit order.

Ordering the 33.5 x 69 Super Flat Vinyl Deluxe Retractable Banner Stand

Configuring this package starts with your artwork. Submit your print-ready file at 33.5″ x 69″ at 100 dpi (scaled), with a small bleed on all edges, and the production team handles the rest. If you want guidance on file formats, color profiles, or bleed requirements before placing your order, the how to choose a retractable banner stand resource includes a section on artwork preparation that covers the specifics.

This is a complete package — hardware, custom-printed super flat vinyl graphic, and carry bag — shipped ready for your next event. Add it to your cart, upload your artwork, and have a professional floor display ready before your deadline.