5ft x 5ft x 16ft Big Sky Square Tower Display – Backlit – Black Frame (Graphic Package)

5 ft. Big Sky Tower 60D BLACK Backlit Graphic Package Includes:

• (4) UV SEG Graphics
• (16) 60D Vertical Extrusions
• (8) 40CG Horizontal Extrusions
• (17) Split Connectors
• (10) Support Struts
• (1) Torx Key
• (4) Eye Hooks
• (2) Ladder Lights
• (1) Power Cord
• (1) Ladder Light Wires
• (1) Transformer
• (1) La Caja Hard Case w/Wheels

Graphic Size: 60″w x 192″h
Graphic Material: UV Backlit UV-Cured Print
Display Size: 5’W x 16’H x 5’D
Shipping Weight: 125 lbs
Shipping Dims: 48″L x 18″W x 11.5″H

Warranty: Lifetime on Frame

What the Frame, Fabric, and LED System Deliver at 16 Feet

The structural backbone of the 5x5x16 backlit big sky square tower display black frame is a tool-free aluminum extrusion frame that assembles without hardware or specialized labor. Panels click and lock into position, and the tension fabric graphics stretch over each face using silicone edge graphics (SEG) that snap into a routed channel — a clean, wrinkle-free finish that holds up through repeated installations. The black frame finish is not a coating applied over raw aluminum; it is a durable anodized treatment that resists scuffing during transport and storage.

The LED lighting system runs internally through the frame, distributing even illumination from behind each fabric panel. At this height, uniform backlight coverage matters more than it does on shorter formats — any hot spots or dim zones become visible to attendees approaching from across a hall. The LED spec on this unit is engineered to eliminate that problem, delivering consistent brightness from the base panels to the top section.

The graphic package included with this configuration means your custom artwork is printed, finished, and sized for the frame — no separate sourcing required. Fabric graphics are dye-sublimation printed for saturated color reproduction that does not fade under prolonged LED exposure.

Seeing This Tower in a Real Exhibit Setting

Picture a medical device company setting up for a three-day trade show at a convention center with a 20-foot ceiling clearance. The exhibit team arrives the morning of move-in with two rolling cases and a graphic bag. Frame sections are color-coded for assembly sequence, so two people have the structure up in under 40 minutes. Graphics are loaded panel by panel — the SEG bead slides into the channel with light pressure, tensioning the fabric automatically. Once power is connected, the LED system activates and all four sides of the tower come to life simultaneously.

Attendees walking the main aisle from 80 feet away can read the company name and product category displayed on the tower’s upper panels. The lighted tower display doubles as a wayfinding marker for scheduled meetings — partners navigating a crowded hall use it as a landmark. At the close of the show, the fabric comes off in reverse order, frame sections break down, and everything repacks into the same cases it arrived in.

For teams that want to understand how this format compares to other vertical exhibit structures before committing, the tower display guide covers configuration trade-offs, height considerations, and graphic planning in full detail.

Three Buyer Questions Answered Before You Order

Does the 5x5x16 footprint work in a standard 10×10 or 10×20 booth?

A 5 ft x 5 ft base fits comfortably inside a 10×10 booth, leaving roughly 5 feet of open floor on two sides for counters, product displays, or staff positioning. In a 10×20 configuration, the tower typically anchors the back corner or center-rear of the booth. Confirm ceiling clearance with your venue — a 16ft display requires at least 16 ft of usable height, and some halls have rigging structures or HVAC drops that reduce usable clearance below the listed ceiling height.

Can the graphics be updated between shows without replacing the frame?

Yes. The SEG tension fabric system is designed for repeated removal and reinstallation. Replacement graphic sets can be ordered separately for seasonal campaigns, product launches, or rebranding — the frame stays in service while only the fabric changes. If you also exhibit with a non-illuminated format and want a comparable fabric tower without LED hardware, the sky non backlit tower uses the same graphic replacement logic at a lower system cost.

Is this the right height, or should a shorter tower be considered first?

The 16ft format is the right choice when your venue supports the height and your brand strategy calls for maximum vertical reach. Exhibitors who are uncertain about ceiling clearance across their show schedule sometimes start with a 12 or 14-foot configuration from the backlit trade show tower lineup and step up when they have confirmed venue specs. Shorter towers in the same product family share the same frame system and graphic logic, so upgrading later does not require retraining staff on a different assembly process.

Place Your Order for the 5x5x16 Backlit Big Sky Square Tower Display Black Frame

The complete inventory of trade show towers at Showfire Displays is available to browse by size and configuration, but if the 5x5x16 backlit big sky square tower display black frame matches your exhibit requirements, this is the page to act on. Submit your artwork files at the correct print resolution, confirm your venue ceiling clearance, and choose the graphic package that fits your current campaign. The team at Showfire is ready to move your order into production — configure yours today.