4 ft. X 16 ft. X 4 ft. 60D Big Sky Square Tower Backlit (Graphic Package)

4 ft. Big Sky Tower 60D Backlit Graphic Package Includes:

• (4) UV SEG Graphics
• (16) 60D Vertical Extrusions
• (8) 40CG Horizontal Extrusions
• (12) Split Connectors
• (3) Support Struts
• (1) Torx Key
• (4) Eye Hooks
• (2) Ladder Lights
• (1) Power Cord
• (1) Ladder Light Wires
• (1) Transformer
• (1) La Caja Hard Case w/Wheels

Graphic Size: 48″w x 192″h
Graphic Material: UV Backlit UV-Cured Print
Display Size: 4’W x 16’H x 4’D
Shipping Weight: 116 lbs
Shipping Dims: 48″L x 18″W x 11.5″H

Warranty: Lifetime on Frame

Frame and Lighting — What the 60D Square Configuration Delivers

The 60D designation refers to the frame profile: a 60mm extrusion that provides the structural rigidity needed to support a 16-foot tower without flex or lean during multi-day events. Unlike round towers that taper toward the top, the square geometry keeps all four graphic faces parallel and plumb, which matters when your branding relies on precise logo placement or continuous photographic imagery.

Internal LED strip lighting runs the full interior height, distributing light evenly so there are no hot spots at the base and no dim zones near the top. The result is a tower display with led performance that looks consistent from 50 feet away, whether the ambient lighting in the hall is warm or cool. The LED system is low-draw and rated for extended continuous use, so it runs reliably across a full three-day show without heat buildup inside the frame.

The base includes a lockable door panel — making this effectively a lockable tower display — so your team can store valuable items inside the structure during show hours and lock up during off-hours without leaving the floor.

SEG Fabric Graphics — Coverage and Print Standards

The graphic package for this configuration covers all four exterior tower faces from base to the full printed height. Graphics are produced on dye-sublimation fabric using a silicone edge gasket (SEG) system, which slots directly into the aluminum extrusion channel for a smooth, frameless appearance with no visible hardware.

Because the fabric is tensioned into the channel rather than adhered, graphic swaps between shows take minutes rather than hours. This is a meaningful operational advantage for brands that refresh messaging by event or season. As an affordable fabric tower display, the SEG system also means replacement graphics cost a fraction of what rigid panel reprints would run.

For a broader look at how SEG systems compare to other graphic formats across different tower sizes and styles, the vertical pillar display guide covers the full spectrum in useful detail.

Booth Scenarios Where the 4 x 16 x 4 Format Fits

The 4 ft. x 4 ft. base footprint is deliberately compact, which opens this tower display with led lighting to a wider range of booth configurations than larger square formats.

Inline 10×10 and 10×20 booths: Positioned at a back corner or center rear, this tower fills vertical space without consuming valuable floor area. The 16-foot height clears most inline booth pipe-and-drape systems and reads across wide aisles.

Island exhibits as a vertical anchor: In open island configurations, this tower provides a central height element that draws attendee attention from multiple approach directions, with graphics visible on all four faces regardless of traffic flow.

Multi-tower programs: The 4-foot square format pairs cleanly with other Big Sky tower sizes. A pair of 4x16x4 towers flanking a curved backwall, for example, creates strong visual framing without requiring a custom structure. You can browse the full range of vertical tower displays to find complementary sizes that work alongside this configuration.

Retail and branded environments: Beyond the trade show floor, this tower is equally effective in showrooms, hotel lobbies, corporate reception areas, and branded activation spaces where floor space is limited but height is available.

If you prefer a version without illumination for lower-cost deployments or venues with lighting restrictions, the Sky non-backlit tower display shares the same 60D frame architecture and SEG graphic system, just without the internal LED component.

Why This Configuration Stands Apart Among Affordable Tower Displays

Height is expensive when it requires custom fabrication or a large crew to install. The 60D Big Sky Square sidesteps both problems: the snap-together aluminum frame goes up without tools, the SEG fabric graphics slot into place by hand, and the entire structure packs into manageable shipping cases designed for freight or checked baggage.

As a seg tower display and a tower display with led in one package, this configuration delivers visual output that would typically require a much larger exhibit investment. The graphic package approach — frame plus printed fabric as a single purchase — removes the guesswork around compatibility and ensures everything arrives ready to use. For exhibitors comparing this against custom-built alternatives, the cost-per-impression ratio over a multi-show run is hard to argue with.

Order the 4 ft. x 16 ft. x 4 ft. 60D Big Sky Square Backlit Tower

Ready to add a 16-foot backlit tower to your next exhibit program? This configuration is available now through Showfire Displays with fast shipping and full graphic production included in the package price. If you want guidance on sizing, graphic artwork requirements, or how this tower fits alongside other structures in your booth, the team at Showfire is ready to help.

Shop the complete tower display package or review the freestanding tower display guide to confirm this is the right configuration before you order. When you are ready, place your order directly on the product page — production and shipping move quickly once artwork is approved.