4ft x 4ft x 14ft Big Sky Square Tower Display – Backlit (Graphic Package)

4 ft. Big Sky Tower 60D Backlit Graphic Package Includes:

• (4) UV SEG Graphics
• (12) 60D Vertical Extrusions
• (8) 40CG Horizontal Extrusions
• (8) Split Connectors
• (3) Support Struts
• (1) Torx Key
• (2) Eye Hooks
• (1) Ladder Light
• (1) Power Cord
• (1) Ladder Light Wires
• (1) Transformer
• (1) La Caja Hard Case w/Wheels

Graphic Size: 48″w x 168″h
Graphic Material: UV Backlit UV-Cured Print
Display Size: 4’W x 14’H x 4’D
Shipping Weight: 96 lbs
Shipping Dims: 48″L x 18″W x 11.5″H

Warranty: Lifetime on Frame

From Case to Fully Lit: Setup in Five Steps

Getting this tower from the shipping case to a fully illuminated display takes two people and roughly 45 to 60 minutes the first time, less as your team builds familiarity. The numbered walk-through below covers the full process.

1. Unpack and sort the extrusion sections. All frame components are labeled, so matching pieces to the assembly diagram is straightforward. Lay them out in order before you begin connecting anything.
2. Assemble the base section first. Lock the base extrusions together at the corner connectors, then stack upward in sections. The aluminum snap-lock connectors require no tools — press until you feel the click.
3. Route the LED power cables through the frame channels. The internal cable channels keep wiring concealed inside the extrusion so no cords are visible on the finished display.
4. Slip the SEG graphic panels over each frame face. Feed the silicone bead of each panel into the perimeter channel, working corner to corner to distribute tension evenly. The fabric will self-tighten as the bead seats fully.
5. Connect the LED driver and power on. A single power connection activates all four faces simultaneously. The LEDs are cool-running, so there is no heat concern during extended show hours.

Once powered on, the 4x4x14 backlit big sky square tower display reads as a single illuminated column from across the hall — consistent brightness on all four sides, no hot spots, no dim corners.

What You See Up Close: Print, Fabric, and Frame Details

The fabric panels are printed on a stretch-knit polyester substrate that transmits light evenly without creating a woven texture visible from normal viewing distances. Dye-sublimation printing saturates the fibers rather than coating the surface, which means color gamut is wide and gradients resolve cleanly — important for photography-heavy brand campaigns or products with complex color requirements.

The aluminum extrusion frame is finished in matte black, which recedes visually so the lit graphic surface reads as the dominant element. Corner connectors are cast from the same alloy as the extrusions, keeping the structural profile consistent rather than introducing a contrasting hardware element. As a 14ft backlit tower display, this height-to-width ratio keeps the silhouette genuinely column-like rather than a squat box — a proportion that reads as architectural rather than simply promotional.

The LED array runs at a color temperature calibrated to enhance rather than shift your printed colors. Warm-white LEDs can push printed graphics toward yellow; this system uses a neutral output that keeps blues, reds, and flesh tones accurate relative to what your designer approved on screen.

Pairing This Tower With Other Elements in Your Exhibit

The 4′ x 4′ footprint integrates cleanly into both inline and island booth configurations. In a 10′ x 10′ inline space, the tower occupies one rear corner and leaves sufficient room for a counter or product table along the remaining walls. In a 10′ x 20′ or larger island layout, two towers placed at opposite ends of the exhibit create a visual frame that draws attendees into the center of the space.

If you want to explore the full range of illuminated configurations available under one product family, the sky backlit tower display category page lists every size and footprint variant, including taller and wider options for large-format exhibit spaces. For teams that exhibit under lower ceilings or in venues where power access is limited, the non backlit tower display offers the same SEG fabric system and aluminum frame without the LED component — a practical alternative worth reviewing before finalizing your order.

The broader trade show tower displays range at Showfire also includes formats that combine storage, monitor mounts, and countertop surfaces if your exhibit requires a functional structure rather than a purely visual one. As a backlit pillar display, this tower pairs naturally with matching banner stands or hanging structures that carry the same graphic language at different heights throughout the exhibit.

Ready to Configure Your Order

The 4x4x14 backlit big sky square tower display is available with a full graphic package that includes printed SEG panels for all four faces, the LED system, frame hardware, and carry cases. Submit your artwork files after checkout and the production team will confirm dimensions and bleed requirements. If your files are not yet ready, a template is available on request.

For buyers earlier in the selection process, the illuminated sky tower overview page covers the full size matrix so you can confirm the 4 x 4 x 14 footprint is right before ordering. Configure your 4x4x14 backlit big sky square tower display now and have a display your brand can reuse across every show on the calendar.