9.84 x 7.4 ft. QSEG Single Frame Display Kit

Display Size:118″W x 88.5″H x 10.25″D

Graphic Size: 121.5″W x 91″H

Package Includes

• SEG Dye Sub Fabric Graphics (Double-Sided for Graphic Package/Single-Sided for Graphic Only)
• (6) Horizontal Profiles
• (6) Vertical Profile Top
• (6) Vertical Profile Bottom
• (3) Brace Rod
• (2) Foot (full)
• (2) Twin Pole Foot (Full)
• (2) Straight Connector
• (1) Travel Bag

What Arrives in the Box and How Setup Works

One of the reasons exhibitors return to this size is how straightforward the experience is from unboxing to standing display. Here is the complete sequence:

1. Unpack and sort the frame bars. The kit ships with pre-labeled aluminum extrusion sections that slot together at the corners. Lay them out flat before you begin so you can see the full set at a glance.
2. Assemble the outer frame. Push the corner connectors into the corresponding bar ends. The frame locks with a satisfying click — no tools, no loose hardware to misplace. The full 9.84 x 7.4 ft qseg single frame display frame stands in under five minutes with two people, or a few minutes longer solo.
3. Attach the feet or standoffs. Depending on your configuration, the frame rests on included floor feet that keep it level on any hard surface. Feet also distribute the frame’s weight to prevent tipping on carpeted trade show floors.
4. Load the graphic into the SEG channel. Starting at one corner, press the silicone edge of the fabric print into the perimeter groove and work your way around the frame. The edge seats firmly and the fabric self-tensions as you go.
5. Stand the display upright and step back. Once the graphic is fully seated, the display is ready — no secondary lighting rig or accessory required for the basic single-panel build.

The entire process is repeatable at every event, and because the graphic is removable, updating the display for a new campaign takes minutes rather than an afternoon.

Print Quality, Fabric, and the Details That Show at Close Range

A display this size will be viewed from across a room and also up close as visitors approach your booth. The fabric print holds up at both distances. Graphics are produced on stretch polyester with dye-sublimation printing, delivering sharp line detail, smooth color gradients, and saturated brand colors that do not fade or crack the way vinyl banner prints can over time.

The silicone-edge gasket sewn around the graphic perimeter is precision-matched to the frame’s SEG channel depth, so the surface tension is consistent from edge to edge. You will not see ripples, sagging mid-sections, or puckered corners — the common failure points on lesser frame-and-fabric systems. The fabric is also spot-washable and machine-washable on a gentle cycle, so if the graphic picks up scuffs or handling marks between events, a quick wash restores it before the next show.

Because the qseg modular kit uses standardized frame extrusions and channel dimensions, replacement graphics are easy to reorder at any time. Frame dimensions are fixed, so new artwork simply requires a matching graphic file sized to the specified bleed template — no re-measuring, no surprises.

Pairing This Display With Other Qseg Products

The 9.84 x 7.4 ft qseg single frame display does not have to work alone. The Qseg system is designed around a shared extrusion standard, which means this frame connects and coordinates with other panels from the same family.

If you need a full trade show environment rather than a single backwall, the Qseg trade show booth configurations build on the same frame logic and let you add side wings, header panels, or curved sections around your primary display. The result is a cohesive booth that looks planned rather than assembled from mismatched components.

For event producers or facility managers who need to section off areas within a venue, the Qseg partition wall system uses the same fabric-and-frame approach to create free-standing room dividers and separation panels — useful at conferences, pop-up retail, or multi-brand trade show environments.

The broader Qseg modular display range covers everything from small accent panels to 20 ft-wide single-run displays, so you can match frame sizes across your program and share hardware between events when configurations overlap. If you’re newer to the format and want a wider frame-and-fabric comparison, the modular trade show display guide on Showfire covers how to evaluate panel systems, graphic lead times, and total-cost-of-ownership across different booth footprints.

Order Your 9.84 x 7.4 ft Qseg Single Frame Display Today

This size consistently performs for exhibitors who need a full-height, single-panel backwall that ships light, sets up fast, and prints beautifully every time. The custom qseg single frame option lets you submit your own artwork for a branded result that looks purpose-built — because it is.

Ready to configure your display? Add the 9.84 x 7.4 ft qseg single frame display to your cart, upload your artwork, and get your order moving. Contact the Showfire team if you need help with file preparation, sizing questions, or pairing recommendations — we’re glad to help you get the right kit on the right timeline.